I have a tabControl with some tabPages on it.What i want to do is i need to perform an action based on the currently selected tabpage.I have this code but it is still not working[CODE].......
View 2 RepliesI have a tab control in my Main Form which has 2 tab pages, each of which are a different form. I create them as:
Dim UserManagementForm As New UserManagement()
Dim FileManagementForm As New FileManagement()
Then set them up via:
UserManagementForm.TopLevel = False
UserManagementForm.Parent = TabControl1.TabPages(0)
UserManagementForm.FormBorderStyle = FormBorderStyle.None
UserManagementForm.Dock = DockStyle.Fill
[code]....
I have a PrintForm component on my form and I am trying to send the currently active tab page to the print form and then send it to the appropriate dialog. However, I keep getting the document contains no images. Any ideas how I pass the tab page to the print form component?
I drag Tabcontrol.& add two tab pages. I have contextmenu Strip, dat i bound to tabcontrol.I select the ContextMenuStrip & set it to ContextMenuStrip1
Now i right click on tab headers.Suppose i right click on tabpage1,contextmenu is displayed.I want that when i right click on tabpage..I want to get the index of that tab..Even if dat tab page is selected.[code...]
I drag Tabcontrol.& add two tab pages.I have contextmenu Strip, dat i bound to tabcontrol.I select the ContextMenuStrip & set it to ContextMenuStrip1Now i right click on tab headers.Suppose i right click on tabpage1,contextmenu is displayed.I want that when i right click on tabpage..I want to get the index of that tab..Even if dat tab page is selected.Ex-Mozilla.
Private Sub TabControl1_MouseClick(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles TabControl1.MouseClick
Try
[code]....
Above event gives me the index,when i select the tab.
I have this program that should execute a piece of code base on the tab that is selected. How do I do it?I've tried:if tabcontrol1.tabcount=1 then 'Execute this code'
else if tabcontrol1.tabcount=2 then'execute this code end if-But doesn't work, what's the proper way of doing it?
I have a TabControl with two TabPages and I was wondering what is the best way to test which tab is currently displayed?
View 5 RepliesHow do you close ALL of the tabs in a TabControl except for the currently selected one?
View 2 Replieshow to change the tabpage selected of the tabcontrol by using normal buttons (like button1, button2,button3 and so on). I don't want to use the ugly default buttons at the top of the tabcontrol to change it.
View 4 RepliesI drag Tabcontrol.& add two tab pages. I have contextmenu Strip, dat i bound to tabcontrol.I select the ContextMenuStrip & set it to ContextMenuStrip1 Now i right click on tab headers.Suppose i right click on tabpage1,contextmenu is displayed.I want that when i right click on tabpage..I want to get the index of that tab..Even if dat tab page is selected.
[Code]...
My UI currently addsabPageGraphs to a TabControlMain dynamically. I now need to present 4 different views of the same data. I want to do something like the following code indicatesbut there is no 'Add()' method for TabPages by which I can add 4 Tabs to an existing TabPage.How would I accomplish this so that under a specific dynamically added TabPage, the User can select any of 4 new TabPages with a different graph to view.
if (!this.tabControlMain.Contains(this.tabPageGraphs))
{
this.tabControlMain.TabPages.Add(this.tabPageGraphs);
[code]....
Is this the only, or correct, method for hiding a tabpage in a tabcontrol?
Hide it:
Dim RemovedTabs as List(Of TabPage)
RemovedTabs.Add(aTabPage)
aTabControl.Controls.Remove(aTabPage)
[code].....
I am back with new problems relating to TabControl Page. On the TabControl there are 2 Pages which are : PagDisplay - Contail DataGridView (ReadOnly)PagEdit - Contain TextBox controls for editing data from PagDisplayThe System Analyst specification is after editing the data at TabPage2 when the user click on PagDisplay on TabControl it will activate the Function FCheckData to validate all the textbox data on PagEdit. If there are invalid data, Function FCheckData will return FALSE.When FCheckData = false, it should return to TabControl1.PagEdit page but I don't know how to do it. Here are the incomplete coding.
dim bolEdit as boolean = false
Private Sub TabControl1_SelectedIndexChanged(ByVal sender As System.Object,
ByVal e As System.EventArgs) Handles TabControl1.SelectedIndexChanged
[code].....
I'm recently tried to make a custom tabcontrol that able to move the tab to left or right...
But there's a problem, I'm don't know how to get the tab's item width... What I get with TabControl1.SelectedTab.Bounds.Width is the tabpage's width, not tab item's width...
I need to get tab item's width to know if the selected tab had to be stay, or move left, or move right, when the mouse is moving and holding...
For an example, if the cursor pressed and holding Tabpage1, and it move to Tabpage2, then the Tabpage1 should be move right...
If I can get the tab item's width, then I can know the cursor is on which tab by mathematics... Or if can, I want to get the tab that on the cursor directly...
I have a gridView in ConsumerList page. When Edit button is clicked (in each row), it is navigated to a EditConsumer page. In the EditConsumer page, I need to get the values of the selected row using Page.PreviousPage.[code...
View 2 RepliesI couldt find an event that I can use to determinate which tab page is selected. I couldt find SelectIndexChanged
View 3 RepliesHow can I make an event for a tabcontrol which has Tabpage1, Tabpage2, Tabpage3, and so on.. For example... There's a label outside the tabcontrol (Label1). If tabpage1 is selected, how can I make the label1's text changed?
View 1 RepliesI'm doing my project and I design including many tab control in vb.net.
Example: I have 3 tab pages like tab1,tab2,tab3. And I have menu bar to open tab1,tab2,tab3.
My Question is: How can you use code to open each tab page?
One of the great features of Page Frames in the now discontinued FoxPro language was that you could use a Page Frame (like a TabControl) and hide the tabs. The nice thing about this was that if you wanted (for example) to have simulated "frames" you could use a Page Frame control, hide the tabs, and that gave you endless frame that you could then access programmatically.I need to do something along the same lines. To further illustrate, if you look at any configuration screen in Office 2007, they all have a ListBox on the left, and then clicking on those Listbox selections brings up "frames" on the right with what you want to work with.This is the effect I want to create - but in .NET I cannot see a good control to use.
Panels - these seemed a good idea at first, but even when set to Visible and not Visible these frames hide each other so they dont seem like they will work.
GroupBoxes - Tried these but the same problem as with panels.
TabControl - Tried this, and it works great - but I DONT want the Tabs. Instead I want non-tabbed pages, that would then be like frames.
What is the best control to use? And, can I hide the Tabs somehow in the TabControl?
I am back with new problem using TabControl in VBNET2008 Window Application I am trying to figure out how to determine logically either TabPage1 or TabPage2 header button is clicked on.
The TabControl has 2 Pages:
TabPage1 Text = Display Orders
TabPage2 Text = Edit Transaction.
I need to know which one is clicked on in order to write the routines.
I am using a tabcontrol to put all my database tables as I don't want to have too many forms. I tried to set up the search form function by watching a video by Beth Messi called "Creating a search form" under form over data video series. After I finished setting up everthing accordingly, the tool strip appeared bellow the window form title bar. May I know how can I move it into the tabpage?
View 8 RepliesI'm using a TabCotrol in my project , and I want to load as many tabs pages as I need with a PDF control within each tab page so I used this code :
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
Dim NewAdobePage As New AxAcroPDFLib.AxAcroPDF
Dim tb As New TabPage
[CODE]...
And now I want to use OpenFileDialog control to load PDF files into any of the already opened AxAcroPDF controls , How ?
How would I go about checking if a control (in this case a textbox) is selected? I have searched Google as well as gone through all of the possible functions and still found nothing. I know it's relatively easy as I've seen it done before but I can't remember how.
View 3 RepliesMy code follows. I have six items (indices 0-6) and I'm trying to check if one has been selected or not. If not, then messagebox yells at you to select one. If it does, it tells you what you have selected. I'm having a horrible brain fart and contemplated coming here for about 45 minutes as I couldn't get it.
If ListBox1.SelectedItem.ToString <> "" Then
MessageBox.Show("You selected " + ListBox1.SelectedItem.ToString)
Else
MessageBox.Show("Please select an item.")
End If
I have a CheckBoxList where one of the options includes a textbox to fill in your own value. So I need to have that textbox become enabled when its checkbox (a ListItem in the CheckBoxList) is checked.This is the code behind, I'm not sure what to put in my If statement to test if that certain ListItem is checked.
Protected Sub CheckBoxList1_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles CheckBoxList1.SelectedIndexChanged
If ___ Then[code]......
I have a test Listview with four rows. In the code below when I start at the top and check each row the textbox is populated with the selected value. When I randomly check a row the correct value (checked row) does not consistently populate.
Private Sub lvwInjuredWorker_ItemCheck(ByVal sender As System.Object, ByVal e As System.Windows.Forms.ItemCheckEventArgs) Handles lvwInjuredWorker.ItemCheck
If lvwInjuredWorker.Items.Count > 0 Then
For Each lvitem As ListViewItem In Me.lvwInjuredWorker.Items
[Code] .....
i'm trying to create a flat tabcontrol with a rounded rectangle tab for the selected tab + no border for inactive tabs?basically i'm trying to recreate that ribbon control in a very simplified form as a usercontrol.
View 5 RepliesI am loading forms into a TabControl creating a new tab page each time the form is loaded. ** I would like to point out that I am using UC instead of a from**
Now, I can easily have many tabs with the same form loaded. On the form I have a 'Search Button' So my question is, after clicking the search button how can I tell which instance of the form the 'Search Button' was clicked? Hope this makes sense
[code]...
How do i checked that within a GroupBox 1 radio button has been selected? I want to provide the user with a message box telling them they have not made a selection from one of the 12 radiobuttons within the group box?
View 3 RepliesI believe we'll have to loop through all of the checkboxes and then check them. The problem, is that when declaring the variable, I'm not sure how to gather check boxes
For example:
Dim i As New ...
For Each i In Tabpage1
...
Next
How do I make an if statement that would check if the user has selected an option from the select list named cboGrade and also to check if the user has selected a radio button from the group named gbCalcType? I have an action that is carried out when a button is clicked, but before that action is carried out, I need to check the above.
I have this so far:
If rbPlus.Checked Or rbMinus.Checked Or rbMultiply.Checked Or rbDivide.Checked Then
instructions are here
End If
This checks that one of the radio buttons are selected. How do i check that an option is selected from the option list? There are three options: 3rd, 4th, and 5th. And the text starts out saying Select One and it locks the control once they choose one.