VS 2010 PrintForm And TabControl Tab Page : How To Print Tab Page
Jul 20, 2010
I have a tab control in my Main Form which has 2 tab pages, each of which are a different form. I create them as:
Dim UserManagementForm As New UserManagement()
Dim FileManagementForm As New FileManagement()
Then set them up via:
UserManagementForm.TopLevel = False
UserManagementForm.Parent = TabControl1.TabPages(0)
UserManagementForm.FormBorderStyle = FormBorderStyle.None
UserManagementForm.Dock = DockStyle.Fill
[code]....
I have a PrintForm component on my form and I am trying to send the currently active tab page to the print form and then send it to the appropriate dialog. However, I keep getting the document contains no images. Any ideas how I pass the tab page to the print form component?
View 1 Replies
ADVERTISEMENT
Jul 2, 2009
I have a form that I am using "PrintForm" to print out, however there is a notes section that can contain a lot of text, seeing as the Printform function only takes a bitmap of the form, it cuts off the text. I have another function that will print the contents of a textbox - I'd like to display this below the bitmap.
First is the code for printing the bitmap - second the textbox
PrintForm1.PrinterSettings.DefaultPageSettings.Margins = New System.Drawing.Printing.Margins(0, 0, 0, 0)
PrintForm1.Print(Me, PowerPacks.Printing.PrintForm.PrintOption.Scrollable)
[Code].....
View 4 Replies
Aug 1, 2011
How do I continue to print a list onto another page once the bottom of the page is reached?
Dim PrintFont As New Font("Arial", 14)
Dim HeadingFont As New Font("Arial", 14, FontStyle.Bold)
Dim LineHeightSingle As Single = PrintFont.GetHeight + 2
[code]....
View 8 Replies
Jul 4, 2009
I know how to print a document from a file and a picture(Graphic) from a file but how do I print a current page of a Windows form I have developed. I.E. from my bank I get my statment by printing the page from a Print Page button. I tried codes I know but in my program it prints a blank Page.
View 1 Replies
Jan 2, 2012
I am loading forms into a TabControl creating a new tab page each time the form is loaded. ** I would like to point out that I am using UC instead of a from**
Now, I can easily have many tabs with the same form loaded. On the form I have a 'Search Button' So my question is, after clicking the search button how can I tell which instance of the form the 'Search Button' was clicked? Hope this makes sense
[code]...
View 2 Replies
Jun 7, 2012
[Code] I can output the above codes, the way I want. but 34 I could not cross the line and then the other page. After 34 lines of each page I want the atlas. 1 through 5 is going to be a between 6 and 8 between the columns, the columns to the right-based format, would like to have the money.
View 13 Replies
Mar 1, 2012
im just wondering does anyone know how to prnt a page of results, and get a print preview using visual studio 2010 and asp.net 4.0.Im pulling students exams results into a gridview and have the class averages etc showing in a label on the academics page. However i need it to print this page, and also to have a print preview.
View 1 Replies
Jun 8, 2011
I'm trying to print my form which I created with Visual Studio. I'm using power pack printing. All goes really well but I'm missing 2cm on the right side of my printout. Page on printer is set to A4.
This is what i try to do but no luck:
PrintForm1.Print(Me, PowerPacks.Printing.PrintForm.PrintOption.ClientAreaOnly)
Whatever I change, it is always printing the cropped page. I'm using xps printer at the moment and there is no zoom option. Can I set the form to zoom to fit the page?
The borders are also too big. Thats why my printout gets cropped, but I have no idea how to change it.
The size of my form is 711 x 1034 pixels, it's a desktop application.
View 1 Replies
May 10, 2012
Is it possible to see the page setup during print preview of crystal reports during run time?
Because there are times that we need to set the top and bottom margin of the report.
View 1 Replies
Jun 12, 2011
I have a text input in textbox1 in tab page 1 and i want that text from textbox1 will be displayed in textbox2 in tab page 2.
View 3 Replies
Oct 5, 2010
I wrote a page Page method in my aspx page. in web service method I need to call FindControl method return textbox and get text box value. But my findControl will take MasterPage object to iterate.
see my code
<script type = "text/javascript">
function ShowCurrentDateTime() {
$.ajax({
[Code]....
How to pass Master Page object or Page to Page method?. So I can use in Sared method.
Is there any way I can access Textbox value directly in Page method? I need access couple of controls in Page Method.
View 3 Replies
Nov 4, 2010
HOW TO RUN THE JAVASCRIPT FUNCTION ON PAGE ONLOAD EVENT IN CONTENT PAGE OF MASTER PAGE.? means i have masterpage and the content page of master page namely default.aspx in vb.net.i wanna run javascript function in Default.aspx and i have called the function body onload in master page.when i run my website it shows the error "" Microsoft JScript Runtime Error : Object Expected ""
View 4 Replies
May 17, 2012
I need sample vb.net code to save single windows form as many page and reload the page whenever i call that page...
View 1 Replies
Jun 13, 2011
How can I get Webbrowser1 to navigate to each page and wait for the one page to completely load, then move to the next page...? [code]
View 3 Replies
Sep 21, 2010
My UI currently addsabPageGraphs to a TabControlMain dynamically. I now need to present 4 different views of the same data. I want to do something like the following code indicatesbut there is no 'Add()' method for TabPages by which I can add 4 Tabs to an existing TabPage.How would I accomplish this so that under a specific dynamically added TabPage, the User can select any of 4 new TabPages with a different graph to view.
if (!this.tabControlMain.Contains(this.tabPageGraphs))
{
this.tabControlMain.TabPages.Add(this.tabPageGraphs);
[code]....
View 2 Replies
Jun 2, 2010
Is this the only, or correct, method for hiding a tabpage in a tabcontrol?
Hide it:
Dim RemovedTabs as List(Of TabPage)
RemovedTabs.Add(aTabPage)
aTabControl.Controls.Remove(aTabPage)
[code].....
View 4 Replies
Jun 3, 2010
I am back with new problems relating to TabControl Page. On the TabControl there are 2 Pages which are : PagDisplay - Contail DataGridView (ReadOnly)PagEdit - Contain TextBox controls for editing data from PagDisplayThe System Analyst specification is after editing the data at TabPage2 when the user click on PagDisplay on TabControl it will activate the Function FCheckData to validate all the textbox data on PagEdit. If there are invalid data, Function FCheckData will return FALSE.When FCheckData = false, it should return to TabControl1.PagEdit page but I don't know how to do it. Here are the incomplete coding.
dim bolEdit as boolean = false
Private Sub TabControl1_SelectedIndexChanged(ByVal sender As System.Object,
ByVal e As System.EventArgs) Handles TabControl1.SelectedIndexChanged
[code].....
View 5 Replies
Aug 7, 2009
I have a master page which contains everything that inherits it within a form. A page inheriting from it needs to run some javascript to act on a text field on a page. However, I can't seem to reference that text field through the javascript, since the form begins on the master page. The following line will come up bogus: document.form1.txtFindUser.value = blah.responseText; This is because form1 is defined on the master page, while txtFindUser is on the current page.
View 3 Replies
Feb 2, 2010
i am new to this. i have 4 pages. login.aspx, account.aspx, settings.aspx and fliers.aspx.
its all programmed in vb.net with sql server backend.on my firstr page, login.aspx i have this code in the .vb page -
Dim SQL As String = "SELECT * FROM table1 WHERE email='" + Me.txtUserName.Text + "' AND password='" + Me.txtPassword.Text + "' "
ExecuteNonQuery(SQL)
[code]...
View 3 Replies
Jul 3, 2006
Does anyone know why a Page_Load would be called twice on a page when requesting an aspx page?I am using .Net 2.0 with the new .net 1.1 compilation model installed. Whenever I request a page, the Page_Load on the aspx page appears to be called twice, so does the Page_Load on and user controls added to that page.
View 16 Replies
Oct 19, 2010
I have a tabControl with some tabPages on it.What i want to do is i need to perform an action based on the currently selected tabpage.I have this code but it is still not working[CODE].......
View 2 Replies
Nov 17, 2009
I am using the below mentioned code in my VB.net application to print two copies of pdf document.
[Code]...
View 1 Replies
Jul 3, 2009
I'm doing my project and I design including many tab control in vb.net.
Example: I have 3 tab pages like tab1,tab2,tab3. And I have menu bar to open tab1,tab2,tab3.
My Question is: How can you use code to open each tab page?
View 1 Replies
Aug 31, 2009
One of the great features of Page Frames in the now discontinued FoxPro language was that you could use a Page Frame (like a TabControl) and hide the tabs. The nice thing about this was that if you wanted (for example) to have simulated "frames" you could use a Page Frame control, hide the tabs, and that gave you endless frame that you could then access programmatically.I need to do something along the same lines. To further illustrate, if you look at any configuration screen in Office 2007, they all have a ListBox on the left, and then clicking on those Listbox selections brings up "frames" on the right with what you want to work with.This is the effect I want to create - but in .NET I cannot see a good control to use.
Panels - these seemed a good idea at first, but even when set to Visible and not Visible these frames hide each other so they dont seem like they will work.
GroupBoxes - Tried these but the same problem as with panels.
TabControl - Tried this, and it works great - but I DONT want the Tabs. Instead I want non-tabbed pages, that would then be like frames.
What is the best control to use? And, can I hide the Tabs somehow in the TabControl?
View 11 Replies
May 30, 2010
I am back with new problem using TabControl in VBNET2008 Window Application I am trying to figure out how to determine logically either TabPage1 or TabPage2 header button is clicked on.
The TabControl has 2 Pages:
TabPage1 Text = Display Orders
TabPage2 Text = Edit Transaction.
I need to know which one is clicked on in order to write the routines.
View 7 Replies
Feb 16, 2012
How do I print the page title and the header of a GridView on each print page?
I want to add page title and GridView heading on each page.
I used page break to break the GridView into multiple pages, but only the first page comes with title and all other are without header and title page.
For a dynamic GridView, my code uses AutoGenerateColumns="true".
View 1 Replies
Mar 19, 2009
I am using a tabcontrol to put all my database tables as I don't want to have too many forms. I tried to set up the search form function by watching a video by Beth Messi called "Creating a search form" under form over data video series. After I finished setting up everthing accordingly, the tool strip appeared bellow the window form title bar. May I know how can I move it into the tabpage?
View 8 Replies
Nov 25, 2009
I'm using a TabCotrol in my project , and I want to load as many tabs pages as I need with a PDF control within each tab page so I used this code :
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
Dim NewAdobePage As New AxAcroPDFLib.AxAcroPDF
Dim tb As New TabPage
[CODE]...
And now I want to use OpenFileDialog control to load PDF files into any of the already opened AxAcroPDF controls , How ?
View 6 Replies
May 11, 2011
The thing is i have a Master page and a Content Page. I have a LoadComplete in Content Page and a PreRender in Master Page. The problem is one of my htmlcontrols on content page i change on the LoadComplete event server side of the content page. I also have some code for disabling controls on the Master Page PreRender event. For some reason all controls on the aspx side go through the Master Page prerender except the ones that i change on the LoadComplete side. How can i make sure the entire content page loads and then the Master Page PreRender event is called, making all the controls go through that event.
View 1 Replies
Jan 11, 2010
Is there a way to print just the current page from the Print Preview?
View 1 Replies
