I have this program that should execute a piece of code base on the tab that is selected. How do I do it?I've tried:if tabcontrol1.tabcount=1 then 'Execute this code'
else if tabcontrol1.tabcount=2 then'execute this code end if-But doesn't work, what's the proper way of doing it?
I drag Tabcontrol.& add two tab pages. I have contextmenu Strip, dat i bound to tabcontrol.I select the ContextMenuStrip & set it to ContextMenuStrip1
Now i right click on tab headers.Suppose i right click on tabpage1,contextmenu is displayed.I want that when i right click on tabpage..I want to get the index of that tab..Even if dat tab page is selected.[code...]
I drag Tabcontrol.& add two tab pages.I have contextmenu Strip, dat i bound to tabcontrol.I select the ContextMenuStrip & set it to ContextMenuStrip1Now i right click on tab headers.Suppose i right click on tabpage1,contextmenu is displayed.I want that when i right click on tabpage..I want to get the index of that tab..Even if dat tab page is selected.Ex-Mozilla.
Private Sub TabControl1_MouseClick(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles TabControl1.MouseClick
Try
[code]....
Above event gives me the index,when i select the tab.
I have a TabControl with two TabPages and I was wondering what is the best way to test which tab is currently displayed?
View 5 RepliesI have a tabControl with some tabPages on it.What i want to do is i need to perform an action based on the currently selected tabpage.I have this code but it is still not working[CODE].......
View 2 RepliesHow do you close ALL of the tabs in a TabControl except for the currently selected one?
View 2 Replieshow to change the tabpage selected of the tabcontrol by using normal buttons (like button1, button2,button3 and so on). I don't want to use the ugly default buttons at the top of the tabcontrol to change it.
View 4 RepliesI drag Tabcontrol.& add two tab pages. I have contextmenu Strip, dat i bound to tabcontrol.I select the ContextMenuStrip & set it to ContextMenuStrip1 Now i right click on tab headers.Suppose i right click on tabpage1,contextmenu is displayed.I want that when i right click on tabpage..I want to get the index of that tab..Even if dat tab page is selected.
[Code]...
I'm recently tried to make a custom tabcontrol that able to move the tab to left or right...
But there's a problem, I'm don't know how to get the tab's item width... What I get with TabControl1.SelectedTab.Bounds.Width is the tabpage's width, not tab item's width...
I need to get tab item's width to know if the selected tab had to be stay, or move left, or move right, when the mouse is moving and holding...
For an example, if the cursor pressed and holding Tabpage1, and it move to Tabpage2, then the Tabpage1 should be move right...
If I can get the tab item's width, then I can know the cursor is on which tab by mathematics... Or if can, I want to get the tab that on the cursor directly...
I couldt find an event that I can use to determinate which tab page is selected. I couldt find SelectIndexChanged
View 3 RepliesHow can I make an event for a tabcontrol which has Tabpage1, Tabpage2, Tabpage3, and so on.. For example... There's a label outside the tabcontrol (Label1). If tabpage1 is selected, how can I make the label1's text changed?
View 1 Repliesi'm trying to create a flat tabcontrol with a rounded rectangle tab for the selected tab + no border for inactive tabs?basically i'm trying to recreate that ribbon control in a very simplified form as a usercontrol.
View 5 RepliesI have a form with a tabControl on it. This tabControl has 10 tabs and each tab has multiple textboxes. I am trying to iterate through these textboxes, but cannot find which collection these textboxes belong to within the project.
View 2 RepliesI'm by far a VB expert, but I've used tabcontrols before without having with happen. VB 2010.I have a tab control element on a form, and on the tabcontrol, tabpage1, I have 21 databound controls that are being pulled from an Access database. Each control has it's own table adapter that is being filled from the same dataset. I also have a save button and a cancel button outside tha tabcontrol on the form itself.
When I debug the app, the forms load correctly and I can see my databound elements containing data. I can click on a single control on the tabcontrol page. Whatever control I click first, such as the gender combobox, becomes the only control I can click on. I can change tab OK, and I can click on the buttons off the tab control (although there is no underlying code for those buttons yet). However I can't click a second control on the form, and I can't close the form without closing the parent form. There is no other code on the trouble form other than the tableadapter fills.
I want control of tabcontrol Attached project contains 2 From first like the second i need Control of tabcontrol Under the Menus and Toolbar the code Public Class Form2
[Code]...
I have an tabcontrol which has dynamically added the tabpages now i want to add datagridview controls in each tab pages how i can do this.I am written the code like
For i = TabControl1.TabPages.Count - 1 To 0 Step -1
Dim dtg As New DataGridView
TabControl1.TabPages(i).Controls.Add(dtg)
[code].....
I am not sure whether it is possible or not? need suggestion.I want to display filenames from 2 different folders into 2 different DataGridview controls that are placed in 2 tab pages of TabControl1. Here is the code that I have tried. By running this code, I can able to show the filenames from a folder onto DataGridView1 in Tabpage1 but not in DataGridView2 of tabpage2.
[Code]...
I have a tab control with two tabs. Both tabs have controls which are unique to them, but there is one control which I would like to always appear on whichever tab is currently active. I figure I just need to add some code to TabControl1_SelectedIndexChanged(). I tried
MyControl.Parent = TabControl1.TabPages(
TabControl1.TabPages.IndexOf(TabControl1.SelectedTab))
MyControl.Parent.Update() ' is this necessary?
[code]....
I'm trying to figure out how to remove a border from a tab control. The closest thing I can find is the following link but I don't know how to add this to my vb.net form.[URl]..
View 1 RepliesI'm using a TabCotrol in my project , and I want to load as many tabs pages as I need with a PDF control within each tab page so I used this code :
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
Dim NewAdobePage As New AxAcroPDFLib.AxAcroPDF
Dim tb As New TabPage
[CODE]...
And now I want to use OpenFileDialog control to load PDF files into any of the already opened AxAcroPDF controls , How ?
I need to fill in the properties of the boarderstyle in combobox so User can change his boarder style as he wish in other words when user open combobox it shows -BorderStyle.Fixed3D-BorderStyle.FixedSingle-BorderStyle.None and when he choose the style it performed at the runtime
View 5 Repliesremove the tabs from the TabControl and just buttons to control which screen is shown.Ive coded a form that uses buttons to hide and show panels but because you cant click buttons in design view, its extremely hard to edit the content in the panels.
View 1 RepliesI want to customize the tab control the tabpage headers shoud fill the tabcontrol header. if there are only two tab pages then the header should be divided into two parts and please give me good info about tabcontrol custonmization for better look and work
View 1 RepliesI am loading forms into a TabControl creating a new tab page each time the form is loaded. ** I would like to point out that I am using UC instead of a from**
Now, I can easily have many tabs with the same form loaded. On the form I have a 'Search Button' So my question is, after clicking the search button how can I tell which instance of the form the 'Search Button' was clicked? Hope this makes sense
[code]...
I want to customize the tab control the tabpage headers shoud fill the tabcontrol header. if there are only two tab pages then the header should be divided into two parts
and give me good info about tabcontrol custonmization for better look and work
How can i play an audio that possibly mp3 or wav without let the user to select the file by using the open dialog box. i want the audio to play when the user press a key. for example user press key 1 then audio1.mp3 will be play.
View 1 RepliesI want to have my current row stand out as the current row by virtue of the background color.I also want my current cell stand out from the row color.
in other words i want to controll the background of the current cell as well as the current row, and have these colors different from each other as wel as the background from the non current cells.
I am getting confused with the notion of the current row vs the selected row.I have tried messing with the default row style.selectedbackgroungcolor as well as the same for the default cell style, but cant get it to work the way i want.
i can almost get it if i set the selection mode to full row, but then cannot get the current cell to have a different background color.
The new application that Im building allows the user to create custom Labels and then move them around on a form.I have the labels created successfully using this
vb
Dim lbl As New Label lbl.Text = TextBox1.Text lbl.Font = New Font(lbl.Font, FontStyle.Bold) lbl.Size = New Size(25, 25) lbl.TextAlign = ContentAlignment.MiddleCenter lbl.Location = New System.Drawing.Point(10, 10) lbl.BackColor = Color.DarkGreen Form2.Controls.Add(lbl) lbl.BringToFront()
and I can move around a single label using this
vb
Private Sub obj1_MouseUp(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles Label1.MouseUp Go = False LeftSet = False TopSet = False End Sub Private Sub obj1_MouseDown(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles Label1.MouseDown Go = True End Sub Private Sub obj1_MouseMove(ByVal sender As
[code]....
The problem is, is that this code just moves label1. What I need it to do is to move whatever label is selected. The user could create an infinite amount of labels and I do not want to repeat the above code an infinite number of times. Is there a way to make the label selectable, and if it is selected, it uses that name in replace of label1?
What is the appropriate declaration such as "ValueChanged" or "Click" for a NumericUpDown that will execute the code when I press enter. I already know that setting the "AcceptButton" property of the main form to a default button will not work, especially if I want a different button to be selected depending on which control I give focus. How do I accomplish this?
PS: Is the syntax any different from Visual Basic 2010 Express than it is on Visual Studio 2012 RC (running in Visual Basic Mode)?
I have an list of controls(PictureBox) and I need to know which one of them is selected, meaning over which of them the mouse is. I thought about getting the location of the mouse and then comparing it with each PictureBox location, but it is quite slow.
View 3 Replies