Convert List Of String Into An Object?
Mar 6, 2012
I am looking for a way to convert my List(Of string) into an Object in vb. So in the end it would be the same as declaring Dim cArray() As Object = new Object. Can anyone point me to how i can achieve this? I cannot use the LINQ .ToArray as that creates a string array and this is not acceptable for my work. I need to pass this object into another one that has the parameter (aArray as Object).
View 4 Replies
ADVERTISEMENT
May 22, 2012
I'm trying to solve a problem regarding types of list. First of all I have a stored procedure in my DB which does a select of a single column and I try to proceed it in my app in VB. By making a method function I declared a DataTable that loads through the SqlCommand(with the CloseConnection behavior). After that I publicly declared a List(Of String) which needs to be populated with the rows/items from the stored procedure that is on the way. Below is my snippet of the code:
Dim dt As New DataTable()
Try
If conn.State = ConnectionState.Open Then
[Code]....
It's LPrefix = collection.Cast(Of String)() where I get an exception error telling me that I can't really convert it. The old fashion way is to iterate with for/for each loop but that's not what I want for best use of performance especially if the list will have thousands of rows from a single column. So basically, I want to insert those items from that DataTable to the List(Of String) without For/For Each loop.
Running on VisualStudio2010 Ultimate, .NET FrameWork 4.0.
View 2 Replies
Feb 28, 2009
I am using Linq to convert an array of any object to a CSV list:String.Join(",", (From item In objectArray Select item.ToString()).ToArray())
This is giving me the strange error: "Range variable name cannot match the name of a member of the 'Object' class."I can get round it by wrapping the string in a VB StrConv method, with a setting of "Nothing":String.Join(",", (From item In oArray Select StrConv(item.ToString(), VbStrConv.None)).ToArray())
However, this seems like a bit of a hack and I would like to avoid it.Does anyone have any ideas when this problems occurs, and any better ways to get round it?
View 1 Replies
Mar 25, 2010
I have the following code:
[code]...
The intention is to convert an IList of custom objects to a string equivalent comprising each element in the Ilist. Unfortunately I can't seem to find a way to get the underlying data of the custom object, and of course as in the above example, using object simply gives me a string of types definitions, rather than access to the underlying data.
View 2 Replies
May 8, 2009
Dim tenItem = From t In _InvalidFeeList _
From i In ItemCount _
Where t.FeeCode <> i.FeeCode _
[Code]....
I am getting "Can not convert to System.generic.list" error. I look all over for this error and it seem like my code should work for example here
edit: I think i should explain what I'm trying to do here. I want to compare two object list and select the object from the InvalidFeeList if the FeeCode is not equal to the object in ItemCount FeeCode and take the first 10 objects from the InvalidFeeList.
View 2 Replies
Apr 15, 2009
Whats the best way to convert a list(of string) to a string with the values seperated by ,
View 3 Replies
Mar 2, 2009
exampledim str as string = "button1"do you see?string of str is "button1"now i want to string of str to object
View 3 Replies
Aug 2, 2011
What I am trying to do is scan through the arraylist that has the number of the label control and concatenate this to the word "label" to end up with "label1", "label2", etc. Then I can then set it's visible property. The values in the array are based on tests in the code.
I haven't hit upon the right way to convert the string "label1" to the name of an object.
HTML
Private Sub FlagAnswers(ByVal wrongArray As ArrayList)
Dim sCtrName As String
[Code].....
View 7 Replies
May 29, 2012
I need to convert item.MergedDate, which is a date, to a string.Code as follows
If item.MergeDate.ToString() = "12/31/9999 11:59:59 PM" Then
item.MergeDate = ""
End If
Obviously this is a terrible attempt, but
I have tried = Nothing and didnt work.
View 2 Replies
Feb 18, 2009
I have a string in the followin format: "Jan06", Feb12 and so forth.
I need to be able to convert this string to a Date object and substract 7 days from it in order to do some validation.
how to convert the above string to a date object?
View 6 Replies
Feb 9, 2012
I have a problem here for converting object of array to string of array in my VB.Net code. The object of array is quite long and contains 6 sets of data here.
Dim varReturnResult As Object
Dim varMapData As Object
Dim StrMap() As String
varMapData = varReturnResult(2)
StrMap = Split(varMapData, vbLf)
I encountered this error "Conversion from type 'Object()' to type 'String' is not valid." when trying to retrieve the StrMap value.
View 3 Replies
Jun 22, 2010
i need help on this simple case [code]How could i do 'that bold area'? xString actually was dynamic variable i got from Database with SQL syntax.
View 4 Replies
May 27, 2007
I'm reading a string from a text file, and want to use that string as the URL for my web browser object. The error I get is it needs to be URI, but I am completely lost on how to make a string into URI.
View 3 Replies
Feb 6, 2011
Here's my problem :
Let say I have a variable called A
Which value is 100 ( A = 100)
In a form, I have a textbox, where I want to enter a variable name
textbox1.text="A" for example
Then I want to display the value of that variable
msgbox (somefunction(textbox1.text)), which will popup 100
I read some info about Reflection, but they all seems to refer to controls and not simple variable
View 12 Replies
Apr 8, 2011
[Code]...
How can I convert a csv string into a list in vb.net?
View 3 Replies
Nov 1, 2011
MVC 3 razor VB.NET project. I have resorted to manual building a list for a drop down box so I can insure certain values are available in the select list and also to control what the first item is in the list. The below is my code snippet for the part that is giving me problems..
[Code]...
View 2 Replies
Jun 12, 2009
I have a string value of form names in my DB so when my condition passes, the variable string will take over the value , then that value will call the form(variable) as string.
[code]...
View 3 Replies
Feb 27, 2012
I have a string variable that contains "19:39:43", I would like to convert that to a date object. When I try I get a formatexception was unhandled error during debugging. I want to convert it to format of hours:minutes:seconds but cannot see how this can be done..
Code snippet:
Dim strtxt As String = "19:39:43"
Dim Datevar As Date = Date.ParseExact(strtxt, "HH:mm:ss tt", Globalization.CultureInfo.CurrentCulture)
I tried just "HH:mm:ss" but not sure if that worked...
View 8 Replies
May 10, 2009
Normally, I'd choose List<String> [or, in VB, List(Of String)] over StringCollection whenever possible: see also Best string container.
However, as it seems, generics — and hence, List<String> — are apparently not supported in VS 2008's settings designer. Therefore, if I want to use a list of strings in my user settings, I have to resort to using a StringCollection there.
Now as I don't want to see StringCollection throughout my code, I need to convert it to List<String>. How do I do this efficiently? Or, even better, am I mistaken and there is a way to use List<String> in settings designer?
View 5 Replies
Feb 10, 2010
I am trying to Add the name of every folder in a directory to a combobox as a string to use in other code. Then I would like to truncate the last 3 characters off of the folder names.Example:
My main directory is C:Main
My sub folders are C:MainsubOne_bp
C:MainsubTwo_bp
C:MainsubThree_bp
I want a combo box with the following added durring run time.
subOne
subTwo
subThree
The following code will get me the folder names in the combo box, BUT it will not truncate the _bp off of the end and they are added as IO.DirectoryInfo that cannot be used as a string in other tasks.
Dim dir As String = "C:Main"
If (System.IO.Directory.Exists(dir)) Then
Dim di_dir As New IO.DirectoryInfo(dir)
[code]....
View 3 Replies
Jan 12, 2011
I have an object with a number of properties (let's say object.one, object.two, object.three). There are about 30 of these properties and they all hold a string ("Pass" or "Fail"). Right now the existing code checks whether the property has value "Pass" or "Fail" and then runs some code that prints stuff out. That is, the same snippet of code is duplicated 30 times, one for each of these properties.
The code looks something like this
If (object.one = ... )
...
End if
If (object.two = ... )
...
End if
If (object.three = ... )
...
End if
I want to use a loop to clean this mess up (each block is huge), but am not sure how to do it. I was thinking perhaps there was a way such that I might be able to construct a string like "object.one" and run some function that will tell the compiler that this is actually an object's property? That way I could create an array containing the object's name like my array = {"object.one", "object.two", "object.three"} and then do something like, in pseudocode
For each string in my array
If (some_function(string) = ...)
...
End If
Essentially, it would take those massive blocks of duplicated code and reduce it to just one block. Is there such a some_function that I am looking for? This is in VB.net.
View 2 Replies
Oct 26, 2009
I want to convert a List (of Long) into a string array.
Reason: it's a list of database IDs and I want to make a comma delimited string to pass into a stored proc.I tried this:
Dim commaDelimitedList As String = String.Join(",", itemIDList.Cast(Of String)().ToArray)
but I'm clearly not using the Cast correctly since it throws an exception:
System.InvalidCastException: Unable to cast object of type 'System.Int64' to type 'System.String'..
Is there a way to get Cast working for this, or am I stuck with ConvertAll and a delegate function?
View 3 Replies
Jan 27, 2012
I have a number of classes that all implement the same interface. e.g.
Public Class IncidentAsset
Implements IModelWithIdentity
Private _assetId As Int16
Private _otherAsset As String
Private _asset As Asset
[Code]...
Is there a better way of doing this in VB.NET using .NET 2.0?
View 1 Replies
Nov 11, 2011
Dim namelist As List(Of String) = New List(Of String)
namelist.Add("Hi")
namelist.Add("Hello")
[code].....
View 4 Replies
Mar 1, 2012
In My project, i have Multiple Forms in which same Function name with return values. i like to convert the String name to Form Object and try to call the user defined function in the corresponding form from the Module I am using vb.net 2008 .
View 3 Replies
Mar 13, 2009
I have a text box with a list of entries for example:
Reference 1
Reference 2
Reference 3
[Code]....
I plan to read the string back into a the textbox later using the split() method and assign each to string to an array.
View 5 Replies
Aug 28, 2009
I'm using String.Join to attempt to turn an array list into a string that is comma separated, such as "1,2,3,4". I can't seem to get the syntax working.
Here's what I'm trying:
Dim aryTest As New ArrayList()
aryTest.Add("1")
aryTest.Add("2")
aryTest.Add("3")
[CODE]...
How can I go about doing this properly?
View 3 Replies
Nov 2, 2010
To be able to sort a dictionary by value I'm using this code:
Dim idCurrentJobs As IDictionary(Of String, Int32) = New Dictionary(Of String, Int32)
'The string in the dictionary represents a jobname and the integer is a counter for how many jobs im currently are running in the application'
idCurrentJobs.Add("JobName1", 2)
[code]....
View 2 Replies
Dec 2, 2010
How to return Ilist of strin that object a has username i want return that name
View 1 Replies
Feb 10, 2012
I am trying to pass a list in string.format as the parameters to the SQL statement, but I get the following error: Index (zero based) must be greater than or equal to zero and less than the size of the argument list. I know that I can get it to work when I list out each individual list member as the arguments, but I am wondering if there is a shortcut so I can just use the list object as the only argument.
[Code]....
View 1 Replies