I'm inheriting ComboBox and want to implement some special processing for Copy/Cut, I have the code below to handle it, but unfortunately the Copy/Cut message code is not sent to WndProc. The same code is working properly in inherited TextBox.[code]....
View 2 RepliesI'm developing a program where I've had to add a keyboard shortcuts system. The problem is it uses a third party OCX for a part of its display, and it is catching some essential WM_KEYDOWN messages when in focus, like Ctrl+C, Ctrl+V, etc. I've tried catching the WM_KEYDOWN message through WndProc, but the message is not propagating, so I guess the keyboard messages go from the inner container to the outer one, don't they?
The WM_KEYUP messages can be caught tho, but I'd prefer to be able to catch some of those messages on the KeyDown event. I'm aware I could make some low-level hook, but I'd like to avoid this workaround. Well, if the WM_KEYDOWN message goes from the OCX to its top level container, I guess I'll have to treat those key combinations in the KeyUp event.
I am capturing a few system command messages (namely minimize/maximize/restore). Inside the WndProc override I am trying to change the form's Me.ShowInTaskbar value but it is causing weird behavior in that minimization and restoration does not occur properly.Can anyone think of a reason why changing this property would interfere with this? The reason I don't really want to post code is because duplicating the effect takes a bit of code/setup. My initial thought was that changing the property's value is somehow sending another windows message and canceling the one I am currently manipulating. I realize this is a little vague but it's a shot in the dark.
View 1 RepliesI've overriden the WndProc of the ComboBox and I am drawing my own combo box, a code snippet is below:
Protected Overrides Sub WndProc(ByRef m As Message)
MyBase.WndProc(m)
Select Case m.Msg
Case &HF
[Code]....
Though the old control is still being painted as my drawn combo box is just overlapping the old drawing. Is there a way to stop it drawing the default combo box?
I want to use spy++ or Winspector But from what i Read they Dont work on windows 7 64bit Correct ? Im trying to read WM_COMMAND Messages from a App.And whenever i Select 'Log Messages' And find the windows etc.Nothing show's up. Is there a alternative ?
View 3 Replieshere I am again I have written a small class called 'Messages' that holds the user messages.The case is that I am not being able to import it. Here it is:
[Code]...
I have a base form and I inherit other forms from it. However, if i go back and change say the size of the base form, I don't see those changes take effect in my inherited forms. Does anyone know why that is? Is there a solution to this issue?So as far as design is goes, what exactly gets inherited by other forms?
View 9 RepliesI'm using the WndProc To get messages about USB flashdrives connecting and removing from the users computer. It works grand. I also use WMI queries to get the info about the flashdrives. It works as it shouold. The problem is when both of these are in the same solution. I ended up creating an extra .EXE that uses the WMI queries to get the drive info and output the info to a CSV file which my Main will parse. I tries creating a seperate class of each and i also tried to make a DLL that I import to no avail.
View 4 RepliesCurrently im trying to write a HotKey class, however in order to intercept the messages you need to overwrite the WndProc and check for WM_HOTKEY.
Currently, im using Inherits Form inside of the class, so that it has the option of overwriding the wndproc, but along with that I get all the forms normal events when trying to handle it.
Below is my
Public Class Form1
Private Class HotKey
Inherits Form
[Code].....
im having problems with the project i was assign, so im supposed to make like a retail store POS, where i look for the articule and add how much did they take and the price.
So this is the main window is attached to this post [TEX]MAIN.JPG[/TEX], so my main problem is that im supposed to copy all the info from the top combobox and textboxes to the datagrid and so the first item it does enter it ok(well thats what i think) and when i try to enter the second item it just refresh the first item So what im expecting is that the datagrid makes several entries so that after that i can transfer all of that to a database registering the sale.
So this is the code of the button that inserts the article to the datagrid
Private Sub ACEPTAR_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles ACEPTAR.Click
TEST1.Text = "Aceptada"
[Code].....
Can I copy text from a combobox?
Like copy as in I can just paste whatever test I copied from the combobox?
I have a VB.net MDI app that contains a modal window (normal window shown as modal). I have a custom title bar button that disappears if the user clicks outside the modal area.Normally, clicking off a modal will cause the system to beep and then flash the title bar of the modal window.
View 2 Replieswhere Windows Message constants can be found in the framework?Example: msg=0x2 (WM_DESTROY) hwnd=0x24038c wparam=0x0 lparam=0x0 result=0x0
I captured that with ...
Protected Overrides Sub WndProc(ByRef m As System.Windows.Forms.Message)
MyBase.WndProc(m)
[code].....
I have a class that inherits the Textbox class. My main goal is to prevent specific keys from being entered into the textfield. Now, I have a solution however I have one issue with it.
[Code]...
I have a form with a button and combobox. I want to make a program that when I click the button, I get a OpenDialogBox so I can chose an Excel file.
Then when I chose the file and click OK, the first column of the excel file shows in the combobox. I have coded the button that opens the file, but I have no idea how to get the data from excel into combobox.
p.s. is there a way to keep the excel file from actualy showing(i've figured out that I should do something with VISIBILITY=FALSE but I keep getting errors at that point)
I'm creating a base class for a button that inherits from Control as opposed to ButtonBase.
I'm using reflector to look at ButtonBase to make sure I don't overlook anything important and I'm puzzled with the contents of the WndProc method. There's checks in there for things like button up, click and capture changed, which as far as I can tell are all handled within the relevent 'On' methods of the class.
I am attempting to detect addition/removal of volume media in a Visual Studio 2005 project. I can get this to work using the WndProc message WM_DEVICECHANGE on all types of volumes except SDHC (Secure Digital High Capicity) cards. Is there another Windows Message I have to listen for? If so, what is it, and what else do I have to do?
Protected Overrides Sub WndProc(ByRef m As System.Windows.Forms.Message)
Dim str As String
Dim devtype As Int32
[Code].....
I made a Vista Aero -style form for XP, but when using it, the application won't close. The FormClosed and Disposed events fire, but not the HandleDestroyed event. I tried to get around that by handling the Disposed event and calling Me.DestroyHandle(), and it worked, but not if the user resized the form so that it caused an IndexOutOfRangeException in BlurImage().The code is attached.
View 2 Replieson the custom inherited control i created, i noticed that when i bind my custom property to a data column, if that data column returns a value other than Null it always return a datarowstate of modified even if there were no changes. to produce this issue, i have below a sample code for a test inherited control
Imports System.Windows.Forms
Imports System.ComponentModel
Public Class TestControl
[code].....
I have two classes[code]...
How can I modify class1 in a sub in class2?
I am having a problem with closing a form which I have inherited I have a form called frmAddForm_Simple, which contains 4 main controls (A Data Grid, A Save Button, A Close Button and a Text Box). The idea around the form is to create a form which could be used for inputting of many different types of data which are all entered in the same way (i.e. to add a new row to a database for [Status] table or [Location] table, all of which contain 2 columns in the database (an [Id] and a [value]). On the form I have a property called _FormChanged, which when the textbox text changes, sets the property to True. I then have the following code on the Close Button:-
Public Sub btnClose_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnClose.Click
If _FormChanged Then
If MessageBox.Show("Are you sure you want to close and discard any changes?", "Discard Changes",
[CODE]...
Is opened as a dialog (ShowDialog) and when I go to close the inherited form (by click on btnClose) and answer No to the above MessageBox the form closes anyway. Using the Debugged I have worked out that the following events occur in sequence (all of which runs in the Master Form mentioned above):-
1) btnClose_Click sub Routine runs
2) I answer No to the question do I want to close the form
3) The debugger steps over the Me.Close() line (as expected)
4) The debugger jumps up to the Sub Initialise (where ShowDialog was called from) and closes the form.
So at no point has the debugger even ran a line of code which reads Me.Close(), but the form closes anyway so Im fairly confused as to why the form should close.
My Master Form (frmAddForm_Simple) Code:-
Public Class frmAddForm_Simple
Private _FormChanged As Boolean = False
Private _FormLoading As Boolean = False
[CODE].............................
I'm confused regarding the MS examples for inheriting a treenode. I have created the following class to allow an addtion description field on the treenode:-
[Code]...
[code].....
View 1 RepliesI am trying to create an inherited form- when I go to add it, I get the following message- "CustomerInformation --- The base class 'Object' could not be loaded. Ensure the assembly has been referenced and that all projects have been built"
View 3 RepliesI am writing a COM Add-in for Microsoft Access 2010 using Visual Basic 2010.
I do not understand why the members of an inherited interface are not available to VBA. They do not appear in the VBA Object Browser and a run-time error occurs if an attempt is made to use them.
Here is a full code sample which demonstrates the problem:
First I have a base class with a defined interface:
Public Interface IClassBase
Property id As String
Property Name As String
End Interface
[Code]....
When I pass an an object 'MyObject' which implements 'IMyInterface' to a method parameter declared as IMyInterface, I understand that this method parameter 'sees MyObject through the eyes of its interface'.
View 2 Replieson the custom inherited control i created, i noticed that when i bind my custom property to a data column, if that data column returns a value other than Null it always return a datarowstate of modified even if there were no changes.to produce this issue, i have below a sample code for a test inherited control
Imports System.Windows.Forms
Imports System.ComponentModel
Public Class TestControl
[code]....
create a form, add the usual objects necessary for data bindings, (datasource, datatable). make sure the data column bound to this TestControl will return non null values.also create a procedure for position changed to catch the datarowstate like below...
Private Sub PositionChanged(ByVal sender As Object, ByVal e As System.EventArgs)
Dim rowstate As DataRowState = DataRowState.Unchanged
[code]....
Note that i used Position - 1 so that when you go to the next record, it will show you the rowstate of the previous record.
on your Form_Load add the ff:
AddHandler YourBindingSource.PositionChanged, AddressOf PositionChanged
don't make any changes to the current record before you go to the next record. you will see that the rowstate will still return Modified.
I know this is random but is there a way to specify that a property explicitly does not need to be inherited? So you can have two sub classes and one object will have that property and the other doesn't?
View 2 RepliesI have a class, Vehicle. I created two child classes, Car and Plane. I want to monitor the speed, which is a Vehicle Property, and bind it to a control (label, or image, for example) in WPF. When i create a static Class which only purpose is watching the Speed Property, it works, as far as the INotifyPropertyChanged is declared with the Speed Property name.
But the problem is, I have to create dynamicly multiple Cars and Planes by looking in an XML file and deserializing my objects, and creating multiple Car or Plane UserControl (Let's not discuss this way of working, please). So I have to get the Speed property inside the Vehicle Class (which is normal), and I have to get a INotifyPropertyChanged on each Speed of each Vehicle Created. So, my Cars and Planes are loaded, and I have to get all speeds, but I can't create a static Speed property by Vehicle. By the way, by creating a non-static Speed property (as int, for example) in Vehicle Class with INotifyPropertyChanged raised in the setter, it does not work. The event seems to be raised, but my converter is not fired, and my controls does not update.
In my Vehicle Class
Private SpeedValue As Integer
<XmlIgnore()>
Public Property Speed() As Short
Get
[Code]....
The PlaneView Class is almost the same for this part.
I confirm that the converter is fired just once, the first time, when the tabs are created, because I put a breakpoint on the Convert function definition. After that, the converter is never fired again. So the picture img_fonctionnement is displayed, but it is never updated. But the Speed property is updated, I swear. And the INotifyPropertyChanged (in Speed's setter) is raised, as far as i know with the help of the debugger.
And the "an item with the same key has already been added" (which appears in a messageBox, and not as an exception) seems to appear only when I am to long with the debugger. In normal execution mode, it never shows.
This is more of a conceptual question than anything.
I have a base class called "RawReader".
It sets up the framework for classes to inherit it and read in specific data systems.
For example, I want an app read in a known format of FoxPro database, a CSV file, or a SQL database (there is about 8 more formats currently), then transfer it over a webservice and create a SQL database from it.
I have everything working with CSV, FoxPro, Access, Excel, etc... Easy enough.
The classes that inherit RawReader, like RawCSV, RawFoxPro, RawAccess all return a struct that contains a dataset as one of the members. The dataset contains the data from the raw system. The webservice receives this struct and creates sql tables and loads the data into it. This has already been coded and works great.
My issue now comes to reading in SQL. Obviously, I could follow the same path, read the remote SQL DB into a dataset, transfer the dataset as above, etc... My "issue" comes in where I feel like it doesnt make much sense to transfer a SQL db to a dataset, transfer it through the webservice, and then try to programmatically recreate the SQL database. I feel like I lose a lot of the granular details from the SQL database (field sizes, extended info, etc..) It seems easier in practice to just create a backup of the database, convert it to a stream object and transfer the backup over to the webservice. But this is where the problem lies...
Since all of the classes inherit from the base class, they are set up to return a DataSet. The hack-ish way would be to just add a stream object to the return struct and in my webservice add other code to make a special case for SQL sources, but I was trying to avoid that.
Any thoughts on the "proper" way to go about something like this?