I'm writing a utility that will do several things. One of the things it's going to do is run some commands on a domain controller, and pipe the results to text files. Is there anyway to create a progress bar that will show the overall progress of the task? Even cooler would be to have a label that said dcdiag running, Can this be done? If so, how would I do it?Dcdiag.exe /e > .Logsdcdiag.txt
View 4 RepliesI'm writing a program in vb.net. The program can be started from another program by passing some arguments or it can be lauched by clicking .exe. I'd like to show the user some options depending on where he is coming.Is the below approach correct? [code]
View 3 RepliesI'm trying to create a little executable that when launched opens an IE browser to various websites like news sites all in different tabs. for example, a tab for wsj, nytimes, etc. How do I access IE with vb.net? What reference do I need to add? I can't find any sample code that I can make work I think it is because I am missing a library in my assembly?
View 3 RepliesI have a usercontrol and the following subroutine in it:[code]If I call this sub from within the usercontrol, the red square loads, is added, and is shown. If I call this sub from the form that the usercontrol is in, the picturebox loads and seems to be added, but doesn't show.I have been trying to figure this out for hours. I've tried adding Refresh(), Show() and Visible=true, but they have no effect, and the messagebox always reads "True" and no error occurs.
View 10 RepliesI have 2 separate projects that i created using Visual Basic 2010. I need to have a Command button in project 1 to open a specific form that i have in my 2nd project.
View 1 RepliesIam using this code: My.Computer.Network.UploadFile(TXTFileName.Text, FTPserv.Text & OpenFileDialog1.SafeFileName, Username.Text, Password.Text) and I want to know how to create a progress bar for uploading.
View 1 RepliesI want to make a progress bar for the loading of a webpage? Anyone know the code for that? I know now...
View 1 RepliesIs it possible to delete the exe file that launched my program
View 3 RepliesI have searched the forum and found several forums related to the backgroundworker thread but have been unsuccessful in finding my answer.My objective is to display an animated gif or progress bar while the program is executing a particular method which can take upwards of several minutes to complete. I cannot get the second thread to run the progress bar while the main progrem is executing the time consuming method. I have created a demo based on another thread and can't seem to get it to create two threads. I was attempting to get the backgroundworker to execute the progress bar while my main code runs on UI thread.
[Code]...
I'm developing a vbnet/c#.NET based application that opens files with different applications(excel, word, etc).
The application is launched using Dim app As Process = Process.Start(ProcessProperties)
Now, when I have to terminate the process I use app.Kill() but I need to check if the document has been modified before killing it.
How can I handle that? And if it's possible, how can I launch the application native prompt for save?
I have set my program up to run on system startup like so:
Code:
Private Sub enableRunOnSystemStartup()
My.Computer.Registry.CurrentUser.OpenSubKey("SOFTWAREMicrosoftWindowsCurrentVersionRun", True).SetValue(Application.ProductName, Application.ExecutablePath)
End Sub
The problem is that when it does start, it opens up in a window. I wish to provide the user with 4 options for what to do on system startup.
1. Don't run on system start.
2. Run and open a window.
3. Run but start minimized to the taskbar.
4. Run but start minimized to the system tray.
It's options 3 and 4 that cause the problem. If the user starts the program manually, it should start in window mode, but if the program starts from system startup, I need to check which option the user has selected and perform that option.
I was thinking of passing some sort of parameters to the program when it loads but I am not sure how these parameters could be sent to the program. One way would be to create a separate program that loads on system startup. When that program loads, tell it to load my program but pass a parameter to it to tell it that it was booted from startup. I feel like there should be a better way.
I was also thinking of getting the time of the last system bootup. Then comparing it with the current time, although this might not work if the user loaded my program as soon as they logged on.
A third idea I came up with was to use a shortcut to the exe file and check if the program was executed using that shortcut. I could place the shortcut in the folder ...AppDataRoamingMicrosoftWindowsStart MenuProgramsStartup as opposed to adding it to the registry. But would this work on other Windows operating systems? I'm using Windows 7.
Ideally, this program should be able to run on other computers, but if that is too complicated, I'd rather just get it running on mine first.
Also, in case anyone is interested, my program creates a copy of the user's files on a separate drive, although I don't think this affects what I am trying to do with checking if my program was launched at system startup.
I have developed a program using vb.net 2008 that will allow you to open another program at a specific time. This is just a beta and that is why 2 way of telling the program when to close the program that opened and this program.Anyway this is my issue when I get everything set up to open the program once it opens i don't have focus on the main form or the notification icon. (When the program has not lauched the program I am able to use the notication icon. (notification icon does the follow: restores the main window to normal view and exits the program.) Could some help to get the notification icon to work when the program has launched.[code]
View 6 RepliesI've created a progress bar and it works fine but I'm trying to create a bit of code that informs the user that the progress bar is full and the operation is complete:
[code]...
This is the code for my progress bar, which works fine, but due to the Maximum condition not being a simple 100 value im having problems creating a timer that can display a msgbox when the progress bar is full.
In my installer class, I want to check the existince of a file in the same directory that the setup msi is launched from.How do I determine the directory the MSI is launched from, from within the Installer Class?My installer class is launching succesfully and is able to process a file if I hard code the name and location. My goal is to remove that hard coded reference.
View 5 RepliesI have created a project that uses a listview associated to an imagelist (LargeImagelist, I have set the size as 100 x 75 and 32 bit depth), that displays information from a database along with an image from the image list. My listview is set to tilemode so that I can control the size of the tiles to get two columns of six. The image list is populated when the form is loaded from all the images in a specific folder, this part is working appropriately as I can get a picturebox working consistently that references an image from the imagelist.
[Code]...
It is possible to create progress bar like moilla for winform application code in VB.
View 3 RepliesIn Win7, I am running a service which launches a process which hosts the office-library (Word 2007) for the purpose doing a mail-merge. There is no interface anywhere. When I launch the mail-merge process with the service as the parent, Word cannot create a document using my existing mail-merge Word doc. At first I thought the problem was with UAC so I changed the manifest to run as admin but it seems like that was irrelevant. When I launch the process from explorer or a non-service process instead of the service it works and is able to load Word and a document successfully. I used Process Monitor to see if I could get some clues as to what could be happening. As far as I can tell, when the proc is launched by the service it is using system profile since I see file paths such as c:windowssystem32configsystemprofile and c:windows mp instead of my user profile folders C:UsersUserNameAppDataRoamingApplication etc. My service is running as my username and not localsystem. I check the username using WindowsIdentity.GetCurrent().Name and I get my correct username regardless of service/non-service invocation. I tried changing the Word startup path in the Application object but again it only succeeds in non-service mode. I tried creating the process from the service in both shell mode and non-shell mode and they both behave similarly. I think the problem could lie in the fact that when the proc is launched by the service the user belongs to NT Authority/Service but when launched any other way it is NT
View 1 Repliesi have a windows from project and in that project i created a user control lets call itcustombutton1 now i can use that control quite easily either at design time or runtime by creating a new instance of it like
View 1 RepliesI want to create a gui application for a dos command I use at work. Instead of opening command prompt every time, I'd like to create a gui based application to input a line of text, hit a button and run the command. The command is "java DecryptPassword 'hash tag'". The decryptpassword is a java application that, well, decrypts passwords. The hash tag is provided by a web application that creates a hash tag from a user name and usually looks something like 'StgweteGFSAdfASD='.
I would like to develop a small application where you insert the hash tag in a text box and click a button (Get Password) to run the command. I'm fine with the password displaying in dos prompt but if I could somehow get it to display in the gui that would be awesome. As I'm sure you can tell I am pretty new to all of this.
I apologize if this question is something of the most simple, but I'm not even sure what terms I should use to search. What I'm trying to do is create a 'Sub' that will do something when I call it in another Sub, however I am unsure in how I would pass variables from one another. Here is what I have;
Private Sub Log
LogBox.AppendText(logstuff & vbNewLine)
End Sub
[code].....
I'm have a program (GUI) that interfaces with excel to execute macros. We're using Microsoft.Office.Interop.Excel to call/run the macros and this works great.What I can't figure out is a good way to cancel the macros from the GUI.One idea we had was to use the excel.application variable that runs the macros to write a "stop" value to a specific cell in the workbook, and in the macros (they are all mostly loops), check for the "stop" value in that cell. This crashes my GUI with this The program '[2188] BVLReports.vshost.exe: Managed' has exited with code -336589910 (0xebf00baa).And excel gets tied up, and won't respond. I know how to Exit Sub from within the macro if the "stop" value exists, so I don't need answers on how to check/cancel from inside the macro. Any ideas on a better way to write this "stop" value or a better way to cancel the macros externally?
View 2 Replieshow to create a mailbox but it seems like im stock cause i dont know the correct syntax. Thats the table inside my database that handles the messages function. Im Logged in as NIXZ. What will this command return i mean it contains multiple variables:
[Code]...
im making a web browser which is intertwind in a project, but i cant get the progress bar to display the current percent of a page that is loaded, i want to have 10 segments, each standing for 10% of the total page loaded. So say a page is loaded 67%, 6 out of 10 of the segments will be shown.
View 3 RepliesI am trying to implement a BGW and want to report progress to a progress bar for my TextFieldParser program, sometimes if your opening very large files it takes a while and I would like the user to be able to see the progress and have some interaction so they know the program is still running I am a little hung up on what to in the reportprogress
I have:
worker.ReportProgress(0, myReader.ReadFields())
and its not doing anything, I didnt expect it too since ReadFields is an array
parser
Private Sub BackgroundWorker1_DoWork(ByVal sender As Object, ByVal e As System.ComponentModel.DoWorkEventArgs) Handles BackgroundWorker1.DoWork
Dim worker As System.ComponentModel.BackgroundWorker = DirectCast(sender, System.ComponentModel.BackgroundWorker)
[code]....
just hoping that someone may be able to point me to some information where I can create VBA objects in vb.net (I am using VS2008). For example, I would like to create a new object in VBA with the command (Dim x as Matrix) where 'Matrix' is an object with various properties and methods.
View 15 RepliesI copied the code here and translate the code to vb [URL]it is working fine but there is one small problem but I cannot solve? Here is my code: SyncClientVB Another Source The scenario is... the progress is reported by an event (OnCopyingFile event)
Public Sub OnCopyingFile(ByVal sender As Object, ByVal e As CopyingFileEventArgs)
If pbFileTransfer.Value <> e.PercentCopied Then
If txtCurrentFile.Text <> e.FilePath Then
txtCurrentFile.Text = e.FilePath
[code]....
The problem is that it is ok when runned but when I click the form it starts to hang but in the console... it is still continuing.
dp.SyntaxHighlighter.ClipboardSwf = '/dp.SyntaxHighlighter/Scripts/clipboard.swf'
dp.SyntaxHighlighter.HighlightAll('6f5d1b01659646618ff3bdca29fb1b7f')
get the progress bar show the progress of the batchfile running in the background?
View 10 RepliesI have two forms, when the user selects a button, the second form opens and an external executable begins an automated process. The point of the second form, is to only show the current progress of the automated tasks and closes when those tasks are completed.How would I use a progress bar to show the current progress of an action on a different form without knowing how long it will take?
View 9 RepliesfrmMain - Allows user to pick process or combination of processes they want to run frmProcess - Shows progress of their selection I have three modules. Each runs a specific process. The frmMain allows the user to run any one of the three modules individually or all together in a single process (basically, runs the one after the other until done).
[Code]...
Looked through many tuts, can't find one.
View 1 Replies