I can create a checkbox array as follows
Code:
For n = 0 To 13
With (chkboxarray(n))
.Tag = n + 1 ' Tag of button
.Width = 35 ' Width of button
[code]....
But when I run the program the checkboxes only display 2 states (they do work as 3 states). what I am missing to display the "Indeterminate" state?
This is in VB6 (may also apply to VB.net) CheckBoxes can have three states (Checked, Unchecked, Greyed).
But I'm using them to set boolean variables (MuteSound, etc.) This is definitely a value that has only two states. Unfortunately, the Checked and Unchecked don't correspond to a True/False value.
So, I can't have:
[Code]...
Using .Net, I need to generate a response based on only the checkboxes on my form that have had there states changed. So how do I know if the check box has changed from its previous value before submission. I can't use the onchange event because the user may check multiple boxes before submitting.
View 3 RepliesI am using VB Stuido 2008, Net Framework 3.5.I have one Checkbox to Identify the record as Inactive if checked. When I load the form the checkbox is alway unchecked, which is what i want. However, when I go to add a new record the checkbox, not the text for the checkbox is always shaded green, not a checkmark. The checkbox then reacts as if it is checked. This makes it necessary to uncheck the checkbox or else all my record react as if checked.
in the table defintions I have set the default binding value to ((o)) which = unchecked. Iafter setting the default value to ((0)) I deleted the checkbox from my form and then replaced. Not I still get the checkbox shaded which reacts as if Checked.
I have a form that has many checkboxes located on a tab control with 3 tabs each tab has checkboxes on it.I have a button that when pressed selects all the checkboxes. That does work and it does execute all that were selected. However there are no checkmarks appearing at all. This worked before! It seems like the more checkboxes I added to the form the less they properly showed f they were checked or unchecked. Now none of them show unless I close the form and reopen it then all of the boxes are checked like they should be when the select all button is pressed.
View 12 RepliesHow to count the total no. of asp.net checkboxes, checkboxes checked, no. of checkboxes remain unchecked in webform using vb.net ?I m using Visual studio 2008 with vb as a language ..I my webform i have 10 checkboxes...i wanna count total no. of checkboxes in webform in textboxes1 total no. of checkboxes checked in webform in textbox2 total no. of checkboxes remain unchecked in webform in textbox3?
View 2 RepliesI have a theater seating project. I am creating checkboxes in a panel that represent the seats. Each of the rows has a label on it, giving it a row number.When a user clicks one of the check boxes, I need to be able to determine what row the seat was that they clicked on. I then use the row number to determine the price of the seat. I am stumped!! I can't seem to figure out how to get the row number associated with the seat. Here is my where I am configuring the seats:
Private Sub ConfigureSeating()
intTheaterID = CInt(frmTheaterTickets.cboTheater.SelectedItem)
Dim strSQL As String
[code].....
What I am looking to do is write a VB.NET program, as a service that reports anything on client1 that I want (say the fact it is online) to a database on the internet, so I can look on management1 and see the online status of the machine (assuming management1 has a connection to the online database).
What is being reported doesn't matter, what I am looking at is a starting point to create a system like that. I have googled obviously and come up with nothing, I'd just like a "starting point" or some documentation to look at for creating something like this. The service doesn't look too difficult but the periodic reporting of online status or ANYTHING to any kind of database is not something I am sure how to deal with.
I already have setup a VBS that reports information to an ASP script that then places it in a database but I don't know how I would create say a "keep alive" connection for a vb.net service.
please tell me what is below code doing? is it creating array with two values or its creating to string index which will take value later? [code]
View 4 RepliesI have an asp.net page which a user types in a "search" box, the code behind functions/subs etc produce a list of users matching the search criteria. In front of all the users returned in the search results, I have codded a html checkbox. Under the list of results, there is an "email users" button...
so.. I want to be able to click a number of checkboxes beside the results and then click on "email users" button which should take me to another page with email functionality so an email can be sent to all the previously selected users My confusion is over getting the "selected" user list from the results into the email page.
Because the checkboxes are manually coded within the code-behind file (ie the code basically generates a bit of html and pushes it into a label "placeholder", so I dont get any control functionality to get the checkboxes using the vb code, or can I?
how to add checkboxes into datagrid.
what all references should be made.
I have a listviw with 5 columns. how to add only checkboxes in column 4 and 5? Every time I add an item to that listbox the first three columns will have text and the last two will have always only checkboxes?
View 2 RepliesI have a form which contains a checkbox field. On page load I want to create a separate checkbox for each customer in my Database. The code I have to create the checkboxes for each customer works fine. However, I also want to check in the database if the customer is set to unauthorized if they are then I want to check there box. I also have code for the case where the user checks a box. If a box is checked I update the database setting the unauthorized attribute to true. My problem is when I check a box it works fine and the box is checked, however if I reload the page all the boxes are unchecked. So either my database update is not updating the database or the way I check on page load for checked boxes is incorrect. Any ideas?
The code for the asp checkbox field:
<asp:CheckBoxList id="check1" AutoPostBack="True" TextAlign="Right" OnSelectedIndexChanged="Check" runat="server">
</asp:CheckBoxList>
The Code for the page load:
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim sql As String = "SELECT Name, unauthorized, ID FROM Customer ORDER BY Name"
Dim dt As DataTable = db.execDataTableQuery(sql, "Customer")
[code]....
I'm a newbie in VB.NET and ASP.NET. This is my problem:I retrieve a list of records from DB and, for every row, I need to show 4 checkboxes. I can use a checkboxlist for every rows, but it's not so clear how I can process the results after the submit.
I've some object and some operations available for that object. From database I extract a list of object with all operations. For every operation I want to show a check box to enable or disable the operation. The result is something like that:
[code]...
Using VB
Say I have five checkboxes in a groupbox. I want to run an if then statement where if all boxes are not checked I would perform a certain action. I currently have it set to work using code similar to this
If box1.Checked = False And box2.Checked = False And box3.Checked = False And box4.Checked = False And box5.Checked = False Then
End If
Is it possible to reference the entire groupbox has having a false boolean property?
While doing this is managable - what if I had more check boxes?
i have 15 checkboxes in the form
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
'Dim a As Integer
'For a = 1 To 15
'If ColorDialog1.ShowDialog = DialogResult.OK Then
[code]....
I am working with an old web application developed in VB.NET 1.1 framework. I am having an issue with checkboxes. I have the following code for my checkbox:
<asp:TemplateColumn HeaderText="Reviewed">
<ItemStyle HorizontalAlign="Center" VerticalAlign="Middle" />
<ItemTemplate>
<asp:checkbox ID="chkAppRev" Runat="server"
[Code]...
This all works fine until I add another check box in the asp code and another oncheckchanged method, it seems like it just skips over the query.
On a form I have 28 check boxes, each one represents a day out of a 28 days. I would like to be able to loop through the check boxes and assign a value to each day instead of checking the value 28 times.[code]...
View 8 RepliesOn a form I have a series of 20 checkboxes (cbS1 through cbS20). With that I have an integer named 'Count'
What I need to do: When the forms loads it will get a value for Count. I need all the checkboxes that are greater than this value to be checked.
So if count = 7 then cbS8 through cbS20 will be checked.
Im not really sure the best way to code this is. I know I can do it with a giant case statement...but there has got to be a better way right?
For Accounts As Integer = 1 To 10
If Cbx1.Checked = True Then Call Login1()
Next
What I want to do with this is run the loop through all 10 Checkboxes Cbx1>Cbx10. How do I use the & to do this so where the number 1 is I can replace with Accounts variable?
If I have three checkboxes on my asp.net webform.. if 1 is already checked on pageload event then output in textbox would be 2,3 if 2 and three checkbox would be checked... even after.I want if the checkboxes are already checked on page load event, we have to ignore that checkboxes, and add recently checked checkboxes, checkbox2 and checkbox3, will be entered in textbox 1 as 2,3.
View 2 RepliesI have a datatable with a yes/no checkbox in it and when I filter my datasource it loads form2. Right now I'm using this code to have a label's color as green if it's checked and red if it isn't:
Private Sub Customers2BindingSource_CurrentChanged(sender As Object, e As System.EventArgs) Handles Customers2BindingSource.CurrentChanged
If ActiveCheckBox.Checked = True Then
Label1.Text = "Active"
[code].....
That works when I do something like bindingsource.movenext because it's in the bindingsource_currentchanged event, but when I try adding that to the form_load it's automatically set to Inactive, color red. I figured it's because is set to checked = false, but what event do I use to make this work when the form loads?
What's the value of a checked checkbox for the update/delete/insert commands? Like dates are DateDateTimePicker.Value.Date. Is it something like this?
.AddWithValue("@Active", ActiveCheckBox.Checked)
I don't use checkboxes to often.
I need codes for vb.net Getkeystate Function() without using any DLL.I'm beginner for API Conversion from vb to vb.net.In vb6 they using user32 DLL.In Vb.Net i need to call Getkeystate Function without that "User32.dll" function. can any one post me the codes without using dll?
Is there any way to get key state without using that dll Getkeystate function in vb.net..? if equivalent is any one know means show me that codes.that codes should be work with in .net framework.[code]...
How do I detect the state of the INS-key on the keyboard? MS somehow forgot to implement it in My.Computer.Keyboard...
View 3 Replieswhat i need to do is to add text in a list box via checkboxes. For example if a check box is checked, then a certain text (e.g. "Flea Treatment") gets added to the list box. In my project there are around 15 checkboxes, and not all of the may be clicked. So what I want to do is, when there are values in the list box (Only words!) then I press the Save button and all the values (i.e. all the treatments, e.g. Flea, de-worming, myxomotosis) inside the list box are saved to my database. The table inside the database, is called tblNotes, and has only 4 fields, one of which is a unique ID field, which is the primary key; the other field is the one where I want the values inside the list box, to be saved. As for the other two, they are for standard textboxes, with a fixed length, they are already working.My problem is this: The list box won't save to the database, and I want to know how I could save it. This is the code I have for saving it to a database (btnSave):
Private Sub btnSaveNotes_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSaveNotes.Click
'The purpose is to save the changes made to the record on the screen
'Check if compulsory fields don't contain data, show error message and place cursor back in field[code].....
I'm working on a project where I've loaded a database into a DGV. I also have an additional unbound checkbox column for the users to select entries with. I have code in place to read the selected rows and save them into a CSV string, which is then saved in the usersettings. All this works fine.
PROBLEM AREA:
I'm trying to reverse this effect so that when the DGV loads, the checkboxes that the user selected previously are checked (and the others left unchecked). I've debugged this extensively, and using watches have confirmed that all the values in the loops are right, and the conditionals are all kicking correctly, but it seems the code I'm using to actually check the boxes doesn't work. I've searched dozens of web pages, msdn white papers, and forums, but no suggestions will check the darned box. Below is some example code.[CODE...]
In debugging, it seems the value for the Cells IS changed, but the checkbox never gets selected. The try/catch was just to pick any error messages (but there are none with this code). What am I doing wrong here?
I have two tables, called Machine and Type. Since they have a many-many relationship, I have a MachineType resolution table in my DB. No problem. The end user needs to be able to manage these - create new types and assign them to machines. I have an XtraGridView that I am using to display the Machine as master and Type as detail.
Initially I used a Lookup to add Type dropdowns to the MachineType detail view. But that creates duplicates and is not the best way to display this information. I'd like a series of checkboxes (one for each Type options available) so the user can click the appropriate ones for each machine, thus avoiding duplicates.Upon saving, the appropriate MachineType rows can be generated.
I was going to just code this manually but if there's some kind of binary collection mapping in either DevExpress or the .net framework I can use, I'd prefer that than to reinvent the wheel.
EDIT: This is what I mean. From this thread. However, they store it as a collection (a string delineated by commas) and not a series of DB rows.
How can i make a dropdown list with checkboxes ? I have a windows app ( vb.net) and the checkboxlist control is not real an option with the available space on my form.
View 5 RepliesI would like to know how do I add points to the checkboxes and how do I add the checked boxes up to get the overall points?
Below I have an attachment on roughly how I wan it to works in case my words are not that clear.
I am looking to create a gridview with an add button to have the user be able to insert a new blank row. I am also looking for this row to be able to have checkboxes as fields.
View 1 Replies
