I created Custom Paging User Control for a GridView. The Custom Control I am using at the top of GridView and Bottom of GridView. If I am clicking Next on top of Grid View, it is not effecting in the bottom.
View 1 RepliesI have MainLayout.master that has UC_Menu.ascx on it. I have a page named Customer.aspx that uses MainLayout.master. Customer.aspx also contains a UserControl named UC_Details.ascx.How can I have UC_Menu.ascx call a function that is in UC_Details.ascx with this scenario?
View 3 RepliesI have a Windows Form frmMain() holding seven more-or-less unrelated UserControls, ucFlopsy", "ucMopsy", "ucCottontail", etc...I say "more-or-less" because each of the seven UC has three similar public read/write properties:
IsLocked (a boolean indicating if the following two properties are "Locked")
IsLockedID (if IsLocked=True then IsLockedID is an integer)
IsLockedName (if IsLocked=True then IsLockedName is a string)
[code].....
I have a Windows Form that contains a custom control container as a UserControl. For the sake of this question, this custom control container is called Dashboard. This container called Dashboard contains numerous other controls depending on their permissions. I need to raise events that are contained on these controls through the Dashboard control and over to the Windows Form.
How can I bubble up the event? I'm using VB.NET for this project, but can convert C# into VB.NET.Also, to complicate matters, the main Windows Form is a VB6 project. So, I'm using the InteropFormsToolkit to accomplish this.
I have two UserControls on a MasterPage. DataEntryUC contains several TextBoxes and DropDownList. NavSaveUC contains navigation buttons. When the user clicks on a navigation button, I will be saving the data entered into DataEntryUC from the NavSaveUC UserControl.
I have a couple of tables in my DB that contain stored procedure names, control names, control types, SqlDbTypes, etc.... that correlate with DataEntryUC.
How do I reference a text box that is on DataEntryUC from NavSaveUC?
I have been working on the following code from NavSaveUC with no luck.
Dim MyControlName = "txtFirstName"
Dim MyControlType = "TextBox"
Dim MyStringValue as String
[Code]....
I have a usercontrol that has a main form and calls another form within the usercontrol to get some data from a database that allows the user to select some items from a CheckedListBox control on the sub form. I want to pass the selected items from the CheckedListBox back to the main form and display the results there. I have a public property called DBList of type List(of String) on the main user control. If I create a reference to the usercontrol form the second form within the usercontrol I get a new instance of a user control. All I want to do is set the property on the usercontrol and close the secondary form. How do I reference the usercontrol from the form within the usercontrol?
Code in UserControl:
Public Property DBItems() As List(Of String)
Get
Return DBItems
[Code]....
I just discovered the joys of UserControl's and I was wondering if it is possible to populate the usercontrol with data from a database in the UserControl's Form.Load event instead of the form the userControl is placed on. I feel it would make using the control a lot easier if it just populated itself without anymore code.I tried it with a ListView but it gave me a bunch of errors, so I didn't know if it had to be done a certain way or if it was just one of those things that doesn't work no matter what.
View 8 RepliesI have created a usercontrol named note. in the note usercontrol in contains 6 labels. now i want to access the usercontrol at runtime. it means that, when the right button is press, the note usercontrol is appear, when it pressed again it appear again beside the previous usercontrol. how can i access it like when user is click at one of the labels, that labels backcolor change to other color. it is means that a label that has been clicked is the selected label. and we can change the properties of that selected label.
View 2 RepliesI want to add a usercontrol to a panel. My code does not work: Panel1.Controls.Add(uc1)
View 1 RepliesI got a user control that has a few links, one of them is "add article". It's placed on top of the article and bottom of it. When the user clicks on it, the text changes to 'article added'.
But the text only gets changed for one of the links which has been clicked on. How can I make it so that both text changes no matter which one gets clicked?
I am trying to develop a control that'll allow the developer to populate a collection through markup (e.g. Properties decorated with the attribute PersistenceMode(PersistenceMode.InnerProperty). I have an example from Brian Chavez that more or less does what I want but I want to have the control inherit from UserControl and not Control.Here is the code I have in vb.net:
AggregateFeeds.ascx.vb
Imports Microsoft.VisualBasic
<ParseChildren(True)>
<PersistChildren(False)>
Public Class AggregateFeeds
[Code]...
As it is now when I try to compile I get a compiler error that simply says object instance not set to an instance of an object on the line above. If I take it out, the page loads just fine and the Settings object reflects the values in the markup. Why am I having trouble getting the collection to populate correctly?
How to convert UserControl.vb to dll? I'am using Microsoft Visual Studio 2010 Professional
View 2 RepliesI downloaded the next project from here:
[URL]
Now the project itself was built in C #, but the interesting part of me is "Toolbar.cs".
There is a way to replace the "Toolbar.cs" from C#, to VB? Or i must convert all the project? (Unfortunately, I do not know how)
I just want to build the part that I need(UserControl - "Toolbar.cs") in VB, and the rest can stay in C #, it does not matter to me.
I created a UserControl in a ClassLibrary project and then built it to generate the .dll file. I then want to create a new project and i added this .dll as a reference to my new project. but how do I add the UserControl in the class to my Toolbox? I'm using Visual Basic 2005 Express Edition.
View 2 RepliesI am running through an issue for which I am unable to find a solution.My goal is to:1- compile a x64 .NET library (vb) which has a simple User Control 2- Use this dll in a .NET WinForm application targeted to x64 CPU ONLY.
I have been able to do the first step, but now I am unable to add the library into the VisualStudio Toolbox. With our previous x86 version we had just to right click to VS toolbox, click on "Choose items...", then brows to the needed x86 assembly. If we do the same selecting a x64 lib (of course I am running vs on a 64 bit OS), we get the following message "[DLL PATH] is not a Microsoft .NET module."
I've created a usercontrol in VB that handles paging more efficiently than the DataPager (at least for very large datasets). I'd like to use it in a C# project, but I've been having trouble getting it to work.I've tried simply adding PagingControl.ascx to the C# project, but when I do that the markup and VB code behind don't seem to see each other. --Is this a namespace issue?I've tried adding the PagingControl.ascx to its own VB project, then adding that project to the C# project's solution, as well as a reference. --That almost works. I can register the PagingControl usercontrol in the markup. I can access the usercontrol's properties in the code behind, but any property that involves the UI of the usercontrol fails.
Its seems as if the usercontrol's form hasn't had a chance to load by the time the C# page's Page_Load event handler fires. --Maybe this is an "order of operations" problem? At what point in the C# page's lifetime should a usercontrol's form be loaded?
Have actually managed to create a UserControl complete with buttons, windows media player ... Right-Clicking in the toolbox I browsed to the dll and that brought the control into the toolbox successfully as VideoSourceControl.I can drag/drop this control onto the form and it is fine, buttons etc looking good. Now I want to create it programmatically - I actually want to refer to an array of them.On the form load I have
Public mySources() as SourceVideoControl and I get an error saying that 'SourceVideoControl is not defined'The dll that I loaded was called VideoMixerControl.dll?
how to use a ToolTip on a UserControl? I have a UserControl with some TextBoxes on it & I am adding the UC to a panel on my form at runtime. Now I want to set the ToolTip text for one of the TextBoxes, but I can't figure out how to do that. I have added a ToolTip component to my UserControl at design time.
View 20 RepliesI made a User control.I add two Panel in this Usercontrol. But i want one of panel keep control like container when i add my usercontrol in the from.but when i add user cousercontrol does not contrin any controlntrol in the from but my . how can i user usercontrol like container
View 3 RepliesI believe I am on the right path but didnt get it to fire. userControl1 contains a lstBox, it has MouseDoubleClick event doing something inside the userControl. But I want to add something to that event from the form containing the userControl1. So when I mouseDoubleClick the lstBox inside UserControl1 I want to fire the code in my form eventHandler and in the control eventHandler? RaiseEvent?
Public Class myForm
'CodeBehind of form containing userControl1
Private Sub UserControl1_MouseDoubleClick(ByVal sender As System.Object,
ByVal e As System.Windows.Forms.MouseEventArgs
) Handeles UserControl1.MouseDoubleClick
ds1.clear()
[Code] .....
I have a usercontrol I created. I added a panel and a vertical scrollbar to the right of it. I'd like to be able to scroll it with the mousewheel. The problem is there doesn't seem to be any events that fire on mousewheel. If I take the panel off then the usercontrol has focus and it will fire on mousewheel in the form. But with the panel on it doesn't seem to fire the mousewheel event of the panel, or the usercontrol within the control or even on the form. The best solution would be to have an event fire in the usercontrol but I'd even accept an event on the form and feed it back into the usercontrol.
I'm using vb.net and vs2005 if it matters.
I have a WinForms application (OwnerForm) with some UserControl. When textbox of UserControl is changed, I want to filter content of a OwnerForm. But how can I make it? I don't want to specify OwnerForm inside the user control. I know a solution to add manually handlers for MyUserControl.tb.TextChanged to some functions on a owner form, but I think it's bad way. I'll prefer to have overridable functions, but I can't imagine how to do it.
View 5 RepliesI have a page with three radio buttons and a calendar usercontrol. The radio buttons have autopostback and depending on which one you click it should change the calendar availabilities based on the selected index.The problem is that the page load of the calendar is executing first before the selected index change (where I am setting the needed id).
View 1 Repliesi am creating a vb usercontrol i have a procedure that runs in a module i want to call back to the main activeX control if it was a form i would do
form1.DoThis
I have a userControl (.NET 1.1 Winforms) that has a clickable picturebox as a button.Since I have lots of those usercontrols visible at the same time, I thought It could be nice if I just display the picture box when the mouse is over the usercontrol and hide it otherwise.To do so, I handle the MouseEnter and MouseLeave events of the UserControl, hiding and displaying the picturebox. That works fine.But when the clickable picturebox is visible I'm not longer able to click it (the hand cursor is gone and the click event is not firing).After some test, I realize that if comment all content on the MouseLeave handler that do something with my picturebox... this way the picturebox is clickable.I'm not using the correct event?
Here is the code...
Private Sub NodoEstablo_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Me.pictAdd.Visible = False
End Sub
[code]....
Update:If I resize the picturebox on MouseLeave (just to do something) it works.So far, changing Visible and Location in the MouseLeave prevent me for click the picturebox.
is it add control to a form and add control to a usercontrol is using same method like me.controls.add(newpanel)?im a little bit confuse here because that way is not working. im trying to add a panel, to a usercontrol at runtime. the usercontrol is also added at runtime. for e.g. i have click add bar menu, than a usercontrol appear. then, when the usercontrol is selected and i click on add note menu, it will add a panel that contain labels to the usercontrol. this is what i have done. the 'me' is the usercontrol and i put this code under that usercontrol load event.
[Code]...
How to add textbox dynamically(as per some conditions) to WPF usercontrol. .?
WPF usercontrol will be used in Winforms application...!
how to add usercontrol in event (dll)
private panelMain as System.Window.Forms.Panel
private usrControl as System.Windows.Forms.UserControl
private sub obj_responseMessage(byval envt as Integer) as Handles obj.responseMessage
[code]....
error: An unhandled exception of type 'System.ArgumentException' occurred in system.windows.forms.dll Additional information:Controls created on one thread cannot be parented to a control on a different thread.
I wanted to insert a translation:
I have a UserControl in panel (load at runtime). When I change the size of the window, customize the size of the panel (using "Anchor"). How to adjust UserControl in the Panel?
UserControl.size unavailable from Form
UserControl.size can change only from UserControl?
i have a panel. the autoscroll is set to true. and i have the menu called "add bar". when user click on it, the usercontrol will appear. but different placed. so there will be more that one usercontrol. i want to do the usercontrol y location is increase when the location x is more than 600 for e.g.
If x > 600 Then
y += 200
x = 0
End If
the code above is work, but the problem is, why when i scroll down, and click on "add bar" the value of y location is not same as the previous usercontrol, it should be same on y because it is not yet reach the codition x > 600.