"INSERT INTO Images (PicName) VALUES (" & TextBox1.Text & ") WHERE ImageID = " & Summary..if i run the statement without the WHERE clause it works fine, with it i get the error ' Missing ; at end of SQL statement'
View 4 Replies
I'm running into a slight problem with an SQL INSERT INTO statement. I've tried setting this up first as a command statement and now as a stored procedure. When the process runs it's not signaling any errors and it appears that it's working properly. However when I check the database nothing new has been added. I have the statement within a try catch and it's not catching any errors. I've gone so far as to delete the table and recreate it, still nothing. I should also point out that this entire statement was essentially a copy & paste from another program that's working perfectly.
vb.net code below
Code:
Try
Dim cmd As New SqlCommand
cmd.Connection = con
[code]....
I keep getting this error "Syntax error in INSERT INTO statement." on this line "da.Update(ds, "Llenar")" when i try to update a microsoft access 2003 database with this app.
Code:
1.Imports System.Data
2.Public Class A�adir
3.Dim coneccion As New OleDb.OleDbConnection
[code]....
I'm using a select statement to select data from an Access DB but I'm using. I can select the data perfectly but when I use the Where clause it doesn't select any data and the data I'm looking is in the DB.
View 13 RepliesI design a database in datbase.mdb which have a table name Fuel.The primary key Column Name is ID which data type is AutoNumber (Long Integer)User select the ID number and i run he following statement but error occurEID= combo1.text.trim()userid= Convert.ToInt64(EID)Strsql= Select a1,a2 from Fuel where ID= 'userID'ERROR is Creteria DATA TYPE MISMATCH or No record foundPlease
View 4 RepliesI design a database in datbase.mdb which have a table name Fuel.The primary key Column Name is ID which data type is AutoNumber (Long Integer)User select the ID number and i run the following statement but error occur
EID= combo1.text.trim()
userid= Convert.ToInt64(EID)
Strsql= Select a1,a2 from Fuel where ID= 'userID'
ERROR is Creteria DATA TYPE MISMATCH or No record found?how i pass the where clause creteria if number datatype?and In accesss i read AutoNumber is Long Integer i also convert into INT64 but error is still there.
I have a month and a year dropdownlist which give me the following string 01/2012 The date format in my db is "2012-01-01 00:00:00" but when I select an individual date and put it in a message box it converts to "01/01/2012"
I've altered my select statement below to reflect the converted date. However Im still not given the correct details. Any ideas? Is there a particular format that I need to use when dealing with a timestamp field? Can I even use the "Right" function in a select statement?
Dim newRecordDate As String = val1 & "/" & ComboBox2.SelectedValue Dim sql2 As String = "Select CatA, CatB, CatC, Cost, Currency, MarketingCode, Comment, RecordDate from vw_tblP_Usage_Details where puid = '" & puid & "' right(RecordDate, 7) = '" & newRecordDate & "'"
I've got a query which returns all invoices and credit notes for a given client, in a loyalty structure query where I need the total value of the points the client achieved through invoices, minus those that was forfeited by credit notes. Now I start my query like this (There are more unions in the query, this is just the first part)
[Code]...
i want to use a if, then statement in a where clause in linq to sql. Is this possible? I'm trying to achieve the following:
[Code]...
I'm trying to only add the And If if intLink_pk > -1. If it = -1, then i don't want the and clause at all. Is this posssible within the linq to sql itself?I understand i can write 2 entirely different selects, but if I can't get this done, I may have to write about 50 of them as I want to use multiple Ands if certain conditions are met on the form, such as chk boxes etc.
Say I have this in VB.NET:
Dim executeB As Boolean
Select Case myVariable
Case "a"
'some code
Case "b"
'some code
Case Else
End Select
If myVariable is "a", control will go into the first case statement. Now let's say if myVariable = "a", but inside a's case block, I find that executeB is true, is it then possible to jump to the second case?
I'm building a dynamic query in my ASP.NET MVC project by the following: [code]Where basically the strWhere is a string that I build up a dynamic filter depending on what the user selects to search on.This works great until I need to add a date comparison to the date clause.[code]Which will end up as:"SELECT VALUE userInfos FROM MyDBEntities.UserInformations AS userInfos Where userInfos.BirthDate <= 10/09/1992"..But when i try to execute the query with the ToList whenever a date is in the where string i get the following error:The argument types 'Edm.DateTime' and 'Edm.Int32' are incompatible for this operation. Near WHERE predicate, line 1, column 103.
View 2 RepliesIn my datagrid my sql statement uses a have clause to get set information and i am having countless errors
My code is as shown below, were am i going wrong
con.Open()
cmd.Connection = con
Dim da As New SqlDataAdapter("SELECT MONTH(Head.SalesDate) AS Month, Detail.ProductID, Detail.Qty, SUM (Detail.Qty) AS TotalSold, SUM(Detail.Qty / 30) AS Average FROM Head INNER JOIN
[CODE]...
i'm doing a desktop application using VS2005 with MSSQL 2005. i have a problem with the where clause in the update statement while selecting the listbox item. this is the code for the listbox in load page:
[Code]....
and this is my update query in the delete button event handler: mySQL = "update Appointment set recordStatus = 'deleted'" how do i put in the where clause in when i have 4 columns in the listbox? so can i do this with listbox or have to do with datagridview?
I am trying to read data from an excel sheet but there is an exception saying that no value given for one or more required parameters which I don't understand. Here is my code upto where the error is pointing to:
Dim MyConnection As System.Data.OleDb.OleDbConnection
Dim DtSet As System.Data.DataSet
Dim MyCommand As System.Data.OleDb.OleDbDataAdapter
[code]....
The exception points to that last line MyCommand.Fill(DtSet) which shows me that there is a problem with my select statement. Previously my code reads the data and displays it without the where clause in the select but when I added the where statement so that it can only read data from rows where the column I has a value equal to 176, it instead gives an exception that shows that some required parameter is missing a value?
See
Public Class Form1
Dim sql As String
Dim conn As New OleDb.OleDbConnection
Dim da As New OleDb.OleDbDataAdapter
[CODE]...
The problem, The INSERT statement works fine in the form load but not in the button click event?
Im getting an error with my insert statment "Syntax Error in INSERT INTO statement". I do not understand why. Im using global variables from form 1 and using them in form2 and trying to insert them from form2 into the database.
[Code]...
here is my code so far:
Public Sub cmdSave_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdSave.Click
Dim i As Integer
[Code].....
when i click the button, i get a error message saying "Syntax error in INSERT INTO statement". as far as i can tell, i have everything i need to insert a new row into the database, and i dont see why this problem is occuring.
item(0) is an autonumber key field, so that should make a new record by itself, and i have declared the input textboxes as the data() array
I'm using Vb2005 and Db MS access Is it possible to use tow Select in same sql Statement like this example:
Code:
"Select....Select......."
I will try and explain my problem as simply as I can
I have an Oracle database (external app) that contains a number of tables that I need to get data from, however I also have an SQL database that contains a number of tables that my app is using.
e.g. Oracle Table name PD_112
Structure:
CODE:
What I want to do is get all the data from the Oracle table to display in a list control however I want the values in the DISP_ID column of the Oracle table to be change to the corrosponding DESC values from the DispTbl e.g. 5 from the Oracle table would display Piping instead of 5.
I know how to do this if both the tables where in one database system e.g. Oracle or SQL, however I am not sure the best why to do this when the tables are in 2 different data sources.
Below is the code for doing this in the same datasource:
Code:
I am using VB.Net 2005, just for info
I have an Oracle database (external app) that contains a number of tables that I need to get data from, however I also have an SQL database that contains a number of tables that my app is using.
e.g. Oracle Table name PD_112
Structure:
ID DISP_ID
1 5
2 8
3 5
[code]....
i would like to ask if how can i call this SQL statement in my crystal report. im using Crystal Report 10.
Code:SELECT IF(out_balnce < 0, CONCAT(""("", FORMAT(ABS(out_balnce),2) ,"")""), FORMAT(out_balnce,2)) AS OutBalance, IF(acct_side < 1, CONCAT(""("", FORMAT(tran_amnt,2) ,"")""), FORMAT(tran_amnt,2)) AS TransAmount, user_code FROM LedgerHistory WHERE srvc_nmbr = '12345678' ORDER BY srce_date desc how can i place TransAmount and OutBalance in crystal report?
I have 2 functions that need to work together.1 function is to generate a chart number. The other function is to search via SQL to see if the chart number exists. if the chart number doesn't exist then i need function 2 to return a boolean value so function one can generate a new chart number example code: [code] Now i know that i am probably using the incorrect sql statement, my main issue is that i dont know how return available back to the function.
View 1 RepliesI try to update my data into Access using VB but I got the following error "Syntax error in UPDATE statement." [code]
View 4 RepliesI use the following code to add a record but get the error:"Missing semicolon ( at end of SQL statement. " I removed the semicolon, placed it before the SELECT but it seems to continuously cause problems.
Quote:
Public Sub AddAccountRecord(ByVal name As String, ByVal type As String, ByVal user As String, ByVal balance As String)
Dim strSQL As String
Dim objConnection As New OleDbConnection(strConnection)
Dim objCommand As New OleDbCommand(strSQL, objConnection)
[code]....
How do I list the SQL statement in my crystal report. I have the report loaded etc using
Dim DA As New SqlDataAdapter
Dim DS1 As New DataSet
DA.SelectCommand = New SqlCommand(gSQL, SQLConn)
DA.Fill(DS1, "JobID")
Dim CR1 As New ShowFiles
cr1.Load(gActiveReport)
cr1.SetDataSource(DS1.Tables("JobID"))
CRV1.ReportSource = cr1
This shows my report But how do I reference the SQL Statement, I can see in in report design but cant find it in the loaded report
I build a command.text that looks like this.
UPDATE a_list Set NOTE = 'This is text in a memo type field.' where index = 2;
I get the error --- Syntax error in UPDATE statement.
The provider is jet and the table is in an ACCESS MDB. I get the same thing on a DBF file.
I keep getting the following error when inserting in to my Access DB using VB.
THe code I use is:
Code:
Dim code As String = "INSERT INTO tblUser(Username, Password, Forename, Surname) VALUES('" + txtrEmail.Text.Trim + "','" + "dfd" + "','" + txtrForename.Value.Trim + "','" + txtrSurname.Value.Trim + "');"
[Code].....
I got the sql code to write in a text box and executed i manually in to Access DB and it works perfectly.
I am using Visual Studio 2008 and have connected a database correctly as I have done a login that works fine, although when I try to insert information submitted in the text boxes a different table, it doesn't enter after I end program to check it still has no data in.
Dim con As SqlCeConnection = New SqlCeConnection("Data Source=NESdb.sdf")
Dim myDA As SqlCeDataAdapter
Dim myDataSet As DataSet
[code]....
I am having a critical problem in using Insert Into Statement.I made a small program with Two Textboxes 1. txtName 2. txtRollNoWhen I Enter any data in these fields, the Programs runs fine
View 8 Replies[Code]....
Thought I should probably say im using Windows 7 and the 2010 beta Visual studio
