Select Statement Where Clause In VB 2008?

Nov 28, 2010

I design a database in datbase.mdb which have a table name Fuel.The primary key Column Name is ID which data type is AutoNumber (Long Integer)User select the ID number and i run he following statement but error occurEID= combo1.text.trim()userid= Convert.ToInt64(EID)Strsql= Select a1,a2 from Fuel where ID= 'userID'ERROR is Creteria DATA TYPE MISMATCH or No record foundPlease

View 4 Replies


ADVERTISEMENT

Select Statement Using The Where Clause On Oldb

Nov 28, 2009

I'm using a select statement to select data from an Access DB but I'm using. I can select the data perfectly but when I use the Where clause it doesn't select any data and the data I'm looking is in the DB.

View 13 Replies

Select Statement Where Clause In VB2008?

Aug 17, 2011

I design a database in datbase.mdb which have a table name Fuel.The primary key Column Name is ID which data type is AutoNumber (Long Integer)User select the ID number and i run the following statement but error occur

EID= combo1.text.trim()
userid= Convert.ToInt64(EID)
Strsql= Select a1,a2 from Fuel where ID= 'userID'

ERROR is Creteria DATA TYPE MISMATCH or No record found?how i pass the where clause creteria if number datatype?and In accesss i read AutoNumber is Long Integer i also convert into INT64 but error is still there.

View 2 Replies

Sql - Where Clause In Select Statement - Datetime?

Jan 24, 2012

I have a month and a year dropdownlist which give me the following string 01/2012 The date format in my db is "2012-01-01 00:00:00" but when I select an individual date and put it in a message box it converts to "01/01/2012"

I've altered my select statement below to reflect the converted date. However Im still not given the correct details. Any ideas? Is there a particular format that I need to use when dealing with a timestamp field? Can I even use the "Right" function in a select statement?

Dim newRecordDate As String = val1 & "/" & ComboBox2.SelectedValue Dim sql2 As String = "Select CatA, CatB, CatC, Cost, Currency, MarketingCode, Comment, RecordDate from vw_tblP_Usage_Details where puid = '" & puid & "' right(RecordDate, 7) = '" & newRecordDate & "'"

View 1 Replies

.net - Switch/Select Statement Jump To A Different Case Clause?

Oct 18, 2011

Say I have this in VB.NET:

Dim executeB As Boolean
Select Case myVariable
Case "a"
'some code
Case "b"
'some code
Case Else
End Select

If myVariable is "a", control will go into the first case statement. Now let's say if myVariable = "a", but inside a's case block, I find that executeB is true, is it then possible to jump to the second case?

View 5 Replies

Executing SELECT Statement With Date In WHERE Clause Fails

Sep 10, 2010

I'm building a dynamic query in my ASP.NET MVC project by the following: [code]Where basically the strWhere is a string that I build up a dynamic filter depending on what the user selects to search on.This works great until I need to add a date comparison to the date clause.[code]Which will end up as:"SELECT VALUE userInfos FROM MyDBEntities.UserInformations AS userInfos Where userInfos.BirthDate <= 10/09/1992"..But when i try to execute the query with the ToList whenever a date is in the where string i get the following error:The argument types 'Edm.DateTime' and 'Edm.Int32' are incompatible for this operation. Near WHERE predicate, line 1, column 103.

View 2 Replies

Sql - Failing To Read Data From An Excel Sheet With Where Clause In Select Statement?

May 4, 2012

I am trying to read data from an excel sheet but there is an exception saying that no value given for one or more required parameters which I don't understand. Here is my code upto where the error is pointing to:

Dim MyConnection As System.Data.OleDb.OleDbConnection
Dim DtSet As System.Data.DataSet
Dim MyCommand As System.Data.OleDb.OleDbDataAdapter

[code]....

The exception points to that last line MyCommand.Fill(DtSet) which shows me that there is a problem with my select statement. Previously my code reads the data and displays it without the where clause in the select but when I added the where statement so that it can only read data from rows where the column I has a value equal to 176, it instead gives an exception that shows that some required parameter is missing a value?

View 1 Replies

VS 2008 IfThen Statement In Linq To Sql Where Clause?

Aug 19, 2010

i want to use a if, then statement in a where clause in linq to sql. Is this possible? I'm trying to achieve the following:

[Code]...

I'm trying to only add the And If if intLink_pk > -1. If it = -1, then i don't want the and clause at all. Is this posssible within the linq to sql itself?I understand i can write 2 entirely different selects, but if I can't get this done, I may have to write about 50 of them as I want to use multiple Ands if certain conditions are met on the form, such as chk boxes etc.

View 3 Replies

DB/Reporting :: INSERT Statement With WHERE Clause

Jun 12, 2011

"INSERT INTO Images (PicName) VALUES (" & TextBox1.Text & ") WHERE ImageID = " & Summary..if i run the statement without the WHERE clause it works fine, with it i get the error ' Missing ; at end of SQL statement'

View 4 Replies

T-SQL: Group By Clause In Union ALL Statement

Sep 19, 2010

I've got a query which returns all invoices and credit notes for a given client, in a loyalty structure query where I need the total value of the points the client achieved through invoices, minus those that was forfeited by credit notes. Now I start my query like this (There are more unions in the query, this is just the first part)

[Code]...

View 3 Replies

VS 2008 SELECT Statement Possible?

Jan 26, 2011

I'm using the following statement to search an Excel file. It specifies Sheet1$ and I would like to do a search that included another 12 sheets. Is there syntax that allows a search across several sheets?

View 13 Replies

In Datagrid My Sql Statement Uses - Clause To Get Set Information - Countless Errors

Apr 15, 2012

In my datagrid my sql statement uses a have clause to get set information and i am having countless errors

My code is as shown below, were am i going wrong

con.Open()
cmd.Connection = con
Dim da As New SqlDataAdapter("SELECT MONTH(Head.SalesDate) AS Month, Detail.ProductID, Detail.Qty, SUM (Detail.Qty) AS TotalSold, SUM(Detail.Qty / 30) AS Average FROM Head INNER JOIN

[CODE]...

View 7 Replies

VS 2008 : Select * Statement Return Nothing?

Dec 10, 2011

I am developing a code to open up a .dbf file and append data to a access database.Here is my code for opening the .dbf file.

Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim constr As String = "Provider=VFPOLEDB.1;Data Source=F:JUNO4.dbf;Persist Security Info=False;"
Dim con = New OleDbConnection(constr)
Dim da = New OleDbDataAdapter("Select UNIQUE_ID FROM JUNO4", con)

[code]....

this code gives an empty datagrid.

View 3 Replies

[2008] Select Case Statement?

Dec 10, 2007

what is the propert way to use Case statement for;When user click on a button it will show different picture everytime.I do not want a random generator. Just show pictures in order

View 10 Replies

VS 2005 - Where Clause In The Update Statement While Selecting The Listbox Item

May 12, 2009

i'm doing a desktop application using VS2005 with MSSQL 2005. i have a problem with the where clause in the update statement while selecting the listbox item. this is the code for the listbox in load page:

[Code]....

and this is my update query in the delete button event handler: mySQL = "update Appointment set recordStatus = 'deleted'" how do i put in the where clause in when i have 4 columns in the listbox? so can i do this with listbox or have to do with datagridview?

View 1 Replies

C# - Get All Row Columns Dynamically In The Select Clause?

Nov 22, 2011

I have two DataTables, PersonInformationDataTable on which i only know about a "CityName" field, and another CityInformationDataTable, which has a few constant fields and i do a query like

ResultOfQuery = From person As DataRow in PersonInformationDataTable
From CityInfo As DataRow in CityInformationDataTable
Where (person("CityName) = CityInfo("CityName"))
Select ?? all person info ?? , Country = CityInfo("Country"), Tongue = CityInfo("SpokenTongue")

I would like again all the person fields with their values in the enumerable result.

the result would be like : name=. I don't know how many fields or the fields name of PersonInformationDataTable in advance. With a SQL Query, i could write a string with a loop on CityInformationDataTable columns and have a custom select string like : "Select Name,

View 1 Replies

.net - Reset Index In LINQ Select Clause?

Mar 13, 2012

My LINQ query:

Dim groupedData = (From p In pData _
Group By p.TruncParam Into Group) _
.SelectMany(Function(g) g.Group) _
.Select(Function(d, idx) New With { _

[Code]...

When the TruncParam changes, I would like the index (idx) in the Select clause to reset to 1. So, in the list above, the Index should be SOLUB0001, SOLUB0002, INSOL0001, INSOL0002...CLRES0001, SUMCA0001, SUME0001.

How should I alter the LINQ query?

View 1 Replies

IDE :: Select Query With Variable No Of Condtions In Where Clause?

Feb 12, 2011

I am using VS2010 windows application , SQL server 2008 express at backend.I am designing a windows form with fields to search records in database.Say there are 3 fields in the form :

1) material no 2) material group 3)creation date the corressponding table in database with above fields is " Material_master" User can search materials in the database by entering any of the above fields.No I want to write a query where if user doesn't enter anything then my query should work like

"select * from materialmaster "

if only material no is enterd at screen then

"select * from materialmaster where MatNo = materialno "

if both date of creation and material no enterd then

" select * from materialmaster where MatNo = materialno and Date = creationdate "

In other words , field with no values in it should not be accounted in the where clause. Only one query I want to write.How we can achieve this in VB.net windows application?

View 4 Replies

Syntax For Order By Clause In Linq To Sql That Has Select New With

May 25, 2011

I have a LINQ to sql statement that joins 2 tables. I would like to add a order by clause on one of the columns. However the order by clause does not seem to take effect at all. right syntax in VB.net to achieve order by in the following:

Dim query = From dtIt In dbsomecontext.mytable
Join dtIl In dbsomecontext.anothertable On dtIt.ItemID Equals dtIl.ItemID
Where dtIl.IsAvailable = True
Order By dtIt.manufacturer

[Code]...

View 2 Replies

VS 2005 : Adding A WHERE Clause When SELECT FROM ExcelWS?

Sep 9, 2009

how to select only records from Excel that meet a certain criteria? For example, this works:

Dim daExcelData As New OleDbDataAdapter
Dim cnExcelData As New OleDbConnection("Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & txtInputFileAcc.Text & ";Extended Properties=Excel 8.0;")
cnExcelData.Open()

[code]....

View 1 Replies

VS 2008 If Statement - Next ListBox1.SetSelected(j + 1, True) Will Select The Same Value?

Aug 24, 2009

I have a bunch of code with IF..., when this code is run ListBox1.SetSelected(j + 1, True) it select the next value but j is still 0 so the next ListBox1.SetSelected(j + 1, True) will select the same value. How can i update j?[code].....

View 16 Replies

VS 2008 Select Case Statement For A 2 Dimensional Array?

Aug 20, 2011

I'm in the middle of making a battleship game, and I'm trying to get picture boxes .visible=True based on the coordinates (that have already been given a nice Try/Catch/Finally error handeling block) of the ships. Example: I have picture boxes in a grid formation that are all red, and my naming convention for them is picR00 for the coordinates (0,0), picR01 for the coordinates (0,1)... et al. Because I'm using a(10,10) for my boolean array, I want the stuff thats false (not marked), those coordinates' red picture box to become visible, and the true have the green ones become visible. Here is what i have so far:

Dim a(10, 10) As Boolean, b(10, 10) As Boolean, c As Integer, x As Integer, y As Integer, ox As Integer, oy As Integer
For c = 1 To 3

[Code].....

View 12 Replies

Sql - Perform An Inline Select Statement In A LINQ Statement?

Jun 24, 2011

I have the following SQL:

[Code]...

I want to put it (the select count statement) in this LINQ statement so I can get the sales count in my linq statement: Dim TheLeads = (From L In DB.Leads Where L.IsDeleted = False Select L).ToList() Is this possible to do in LINQ?

View 1 Replies

ElseIf Statement Into A Select Case Statement?

Jun 23, 2010

A co-worker wants to convert the following IfThenElseIf statement into a Select Case statement.
Explain why this is not possible.

If temperature = 100 Then
X = 0
ElseIf population > 1000 Then
X = 1
ElseIf rate < .1 Then
X = -1
End If

View 7 Replies

Database - ID Select ,select Statement?

Mar 23, 2012

have a table with following fields

Emp_id varchar(50)
Emp_Name varchar(50)
Emp_surname varchar(50)

[code].....

View 1 Replies

Use A SELECT Statement To Select All Data?

Apr 2, 2009

I need to use a SELECT statement to select all data under a column name (like all employee names) and then to add the values to a listbox.

I usderstand that the select statement must be:

"SELECT * FROM EmployeeTable WHERE EmployeeNames LIKE *" (at least I think)

but then what? combobox1.fill ("EmployeesTable") ?

View 9 Replies

Database - Compare Two Fields In An SQL SELECT Statement To Then Select Other Fields Based On This Result?

Apr 8, 2012

I have a table which contains a list of products for a company. They input data about how much stock they have and also the level at which they want to be reminded that they need to order new stock.

[Code]...

I want to list all the true results in a form which the user is then able to navigate through. What would be the best way to go about doing this?

View 2 Replies

Select Statement In .NET?

Jul 2, 2010

with the following code which gets stucked on the line of reader = Cmd.ExecuteReader(). It says the SqlException was unhandled (An expression of non-boolean type specified in a context where a condition is expected, near '7/2/2010'.)

[Code]...

View 2 Replies

SQL Select And Where Statement In VB

Jan 8, 2010

I have successfuly connected to a database and have create a select statement (with access) which works most of the time except when im trying to perform a where statement with a date:

strEmployeeDepartmentLocation = Application.StartupPath
con.ConnectionString = "PROVIDER=Microsoft.Jet.OLEDB.4.0;Data Source = " & strEmployeeDepartmentLocation & "swineFlu.mdb"
strSQLSelectQuery2 = "SELECT NumberOfCase FROM table1 WHERE Date = 21/04/2009;"

i dont no if im writing it in the wrong format or what but it dont seem to bring back any data

View 6 Replies

DataTable Select Statement?

Apr 9, 2012

I have a datatable and I would like to get the MAX number from this table where Term Number (first Column) is a certain value. If my datatable is declared as dtMyTable, I'm assuming I need to use dtMyTable.Select(), but I'm not sure if this is the best way.

View 2 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved