DB/Reporting :: Table Columns Into Table Adaptor?
Jul 7, 2011
Rather than running numerous queries in Access I am trying to write a front end for a DB2 database. The Access database is getting to a size that it is causing Access 2007 to have reliability issues and frequent compacting is required. I have created the Dataset, the Table Adaptors, and the Connection String already, but when I put in a bit of code in to fill the Table Adaptors the remote connection I have to work is going crazy (chewed up about 180MB before I realised it was pulling data from work).
Before I started the project I copied the .accdb to my local PC HDD and I pointed the connection string to it, but it still looks like it is trying to pull data from the work network. If it was a small database I wouldnt be concerned but it is pulling major data every time I run it. I have only 2 out of the 4 Table Adaptors running and it didnt fill them even after 10 minutes.
Here is the code I was trying to run... Server name has been substituted for Server for obvious work reasons.
Because the tables are so large I was looking for a way to pull only the columns I need to from the tables, I tried adding .SOFT_ID to the first line of code but the TA spat the dummy message below...
Value of type 'System.Data.DataColumn' cannot be converted to Application_Name.DS_DB2Database.Server_SOFTDataTable'.
Code:
Me.TA_ServerSOFT.Fill(Me.DS_DB2Database.ServerSOFT.SOFT_ID)
Me.TA_ServerSOFT_FOUND.Fill(Me.DS_DB2Database.ServerSOFT_FOUND)
Me.TA_ServerHARD.Fill(Me.DS_DB2Database.ServerHARD)
Me.TA_ServerREF_SUP.Fill(Me.DS_DB2Database.ServerREF_SUP)
I would also like to pull just the data columns I need to speed up the query.
Note: In case youre wondering why I am not connecting directly to the DB2 database. I currently dont know where it is stored and while leveraging Access I am trying to put a level of separation between the app and the db for the time being, later I will try connect directly.
View 9 Replies
ADVERTISEMENT
Jan 17, 2011
I have a rather perplexing issue. I am using VB.net and SQL for my project.I have a database, to which the connection works. I also have a data table and data adaptor, both of which I know work.I am trying to update something in the database, yet it isn't working. Assume everything listed is declared correctly. What am I doing wrong?
teacher_control_table.Rows(0)("DATA_TeacherLockPasscode") = txtPasscode1.Text
table_adaptor2.Update(teacher_control_table)
That last line throws the following exception:
InvalidOperationException was unhandled. update requires a valid UpdateCommand when passed DataRow collection with modified rows.
View 1 Replies
Jun 3, 2010
Can I use different stored procedures from 1 table adaptor that has all the stored procedures in it?
View 3 Replies
Jan 13, 2011
I am using VB.NET 2010 (Visual Basic 2010 Express) on a WPF-based project. I am also using the SQL Server Express built-in to Visual Basic 2010 express.I have just about finished refining my code for hooking up my wpf-based form to an existing SQL database (agentroster.sdf). I have a global data source (AGENT_ROSTER) connected to this database. Connections are confirmed to work properly.This is the first part of the code I'm using, irrelevant code omitted,
Dim table_adaptor As New AGENT_ROSTERTableAdaptors.AGENT_ROSTERTableAdaptor
Dim roster_table As New DataTable("roster_table")
Dim rowposition As Integer
[code]....
how do I fill roster_table with table_adaptor (or alternate method)?
View 1 Replies
Aug 10, 2009
I have a table adaptor that pulls from the sql database, when I edit the table adaptor query it makes this specific table adaptor not a part of the dataset. I have added a column to my database which will contain an integer, when I try to add this column to the query this error occurs, i am using the configure area of the table adaptor.
Error 'AuditProductsTableAdapter' is not a member of 'MemKingClient.MemKingDataSetTableAdapters.TableAdapterManager'.
View 3 Replies
Aug 23, 2010
I have two tables Employees and CafeLogs. Some employees can be cashiers and also customers at the Cafe shop.
Table structures:
Employees: EmployeeId(PK) , FirstName, LastName
CafeLogs: LogId (PK), CashierId, EmployeeId, Value, => CashierId and EmployeeId are the data from column EmployeeId of Empoyee table
Table relationship:
Employees 1:N CafeLogs (CashierId (FK))
[code]....
Right now I know how to select only LogId, Employee's name, and , Value, not with Cashier name yet.
Dim query = From log In db.CafeLogs _
Join emp In db.Employees On emp.EmployeeId Equals log.EmployeeId _
Select log.LogId, emp.FirsName, emp.LastName, log.Value
View 1 Replies
Jun 13, 2012
My problem is with the tickets table, I have listed the user that created the ticket, the tech who will solve the ticket and a user that over sees the ticket. All three users reference the users table. So how do I can I query the tickets table and get all three users that reference the same table storing the users?
Table1: Tickets
1) Ticketnumber
2) EnteredBy User 100
3) Issue
[code]....
What I can do now is something like this:
Select Ticketnumber, EnteredBy, Issue, UserName FROM Tickets INNER JOIN Users
ON Tickets.EnteredBy = Users.UserID
View 3 Replies
Aug 18, 2011
I have Dataset ds filled up with values Until now I was displaying values in GridView. Now I want that all the rows should be columns and columns should be rows.I have 2 options: Either 1 I can directly convert grid to columns and display it, or 2 I can convert the GridView to html and then write loops to convert. I was trying the 2nd option but I cant figure out how I should do that.[code]With this code I am still getting same as GridView. Please help me for converting rows to columns and vice versa.
View 1 Replies
Oct 26, 2011
I'm using VB.net 2005. I have working programs that I populate DataGridViews with something like the following:
[Code]...
View 6 Replies
May 23, 2011
Imagine the following scene: I have one table which have tree columns (ID, Number, Name).
A Select query result on this:
code:
Now, the user deletes the Number 3 and 4. So, now the Select query is going to be:
code:
And I want to have:
code:
How can I organize the column?
View 14 Replies
Feb 21, 2011
I've the following code which successfully makes an average for all the columns from a table. What I need to do though is ignore certain columns in this equation.
Dim totalNumber as Double = 0
Dim count as Integer = 0
For x = 0 To xyz123.Tables(0).Columns.Count - 1
[Code]....
View 2 Replies
Feb 28, 2010
Averaging columns in a table - ignoring certain columns
View 2 Replies
Jan 9, 2009
I want to do something like this:
Code:
'create a dataset and a table
Dim ds As New DataSet
[code].....
View 5 Replies
Aug 30, 2009
I want to add a new table in my accdb and copy the content tfrom an existing table into the new one.
Is there an easy way to do this?
View 8 Replies
Dec 21, 2011
I have a data table whose one column is related to a column of another table. I have a listbox in a form which shows a column (which is sorted by another column value by ORDER clause) of the parent table and other columns are in textboxes. The child table is represented by a datagrid. When I add a new item in parent table and click save, the newly created item is listed at the bottom of the listbox violating my ORDER clause. When I wrote some codes to fill data again after updating, it shows an error message[code]...
View 3 Replies
Jun 16, 2009
I have a table adapter that I use just to fill a form when it loads. I've added two new columns in the backend and went in through the "DataSources" and added them. They appaear in the XSD designer but for some reason are not filling the form when it loads. I the form is writting to the backend correctly via hand coded SQL.
View 5 Replies
Mar 17, 2011
[Code]....
It is returning all the columns by id. I need only the primary key. When I add the following line it is empty: WHERE SIK.indid = 1 Why is that? Is there other ways to do the same thing and working? Since I am in the rush
View 2 Replies
Dec 16, 2009
I am working in vb express 2008.I want to combine two tables to show all the columns of two tables in one table. I tried following query:
"Select de.Description, SUM(de.Quantity) AS Quantity, SUM(de.Amount) AS Amount " & _
"FROM DailyExpenses de " & _
"WHERE de.EDate Between @START and @END " & _
[code]....
And i want to combine two tables to display the following result into a Listview through a SQL query:
Description Quantity AmountDescription Quantity Amount
Mineral Water 12 26 Coca Cola 2 25
Rice 3 215 Sprite 3 15
Beaf 4 150 Beaf 4 50
View 6 Replies
Mar 23, 2010
I created a database in my project, and added a table and some columns to it. Now after making several changes to the program I decided to add some more columns, but for some reason those new columns don't show up in the SQL query builder or the database explorer. I realize that this is an oversimplified explanation
View 4 Replies
Feb 23, 2010
How do I copy a table to another table without overwriting the contents of the second table?
View 2 Replies
Aug 26, 2009
I have a table that contains procedure codes among other data (let's call it "MyData"). I have another table that contains valid procedure codes, their descriptions, and the dates on which those codes are valid. Every time I want to report on MyData and include the procedure description, I have to do a lookup similar to this:
From m in dc.MyDatas _
Join p in dc.Procedures On m.proc_code Equals p.proc_code _
Where p.start_date <= m.event_date _
[Code]....
Is there a way to turn a complex lookup (i.e. a non-trivial join) like this into something SQL can recognize so that I can define it in one place and just reference the description as if it were a field in MyData? So far the only thing I can think of is to create a SQL view on MyData that does the linking and bring that into my data context, but I'd like to try to avoid that.
View 2 Replies
Sep 21, 2011
My application is in VS2008 coded in vb.net.I have a table with three columns FromDate,Todate and Schedule.FromDate and ToDate will have date values whereas Schedule will have a any of these values(weekly,Monthly,Yearly) In my Form i have given some provision to the user to check the records.
My requirement is The currentdate that is Today's date should be compared with the values of Fromdate and ToDate.First it should be check whether Schedule value is Weekly or Monthly or Yearly.If it is weekly than it should check the record in between fromDate to ToDate with a increment of one week.That means it should first check the first value of fromDate than add 7 days to the value and then again check from fromDate and this should continue till it reaches Todate.
[Code]...
View 2 Replies
Apr 22, 2010
I am using data grid view in Windows Form standalone application to display items as excel spread sheet in VB.NET. I got a table named CostTypes with column names [CostTypeID, CostType] and values [1,External] and [2,Internal] (These are constant but more values can be added to table).
I want to create columns with names of the values[External , Internal] in DataGridView. If I use databiding directly I get columns [CostTypeID,CostType] which is not what I am looking for.
View 3 Replies
Sep 22, 2009
I'm working with Microsoft Word and trying to generate a table with headings that may span one to three columns. I'm having trouble figuring out how to do this. The table should look something like the following:Counters
Times (hrs)
Flows (gals)
Day
Regens
Well Starts
[Code]...
To get it to look this way, I'm not exactly sure what to do from VB.
View 1 Replies
Jun 6, 2011
displaying columns from my ms access table to a listview in vb.net..i use oledb in connecting to ms access..
View 2 Replies
Sep 29, 2009
I am using dataset in my project.After filling all the tables in dataset,i want to perform join queries on tables.i dont know how to do that...Also i want to fetch few columns in a gridview from dataset table.I can't use ds.tables("student").select(name,roll)....
View 1 Replies
May 7, 2012
I am loading a table into a textbox and the contents of this textbox I am then writing to file.. But this file looks now like this:
7226218; Hemlock; 22,55; 0
7711175; Pine, Radiata; 12,45; 0
2229886; Pine, Arkansas; 15,25; 0
1822722; Pine, Sugar; 11,55; 0
5255228; Douglas Fir; 9,75; 0 .....
I want to have it aligned in those 4 columns separated by ";"
(I am using courier new, 10 as lettertype)
View 8 Replies
Sep 21, 2011
My application is in VS2008 coded in vb.net.I have a table with three columns.FromDate,Todate and Schedule.FromDate and ToDate will have date values whereas Schedule will have a any of these values(weekly,Monthly,Yearly)
In my Form i have given some provision to the user to check the records.My requirement is The currentdate that is Today's date should be compared with the values of Fromdate and ToDate.First it should be check whether Schedule value is Weekly or Monthly or Yearly.If it is weekly than it should check the record in between fromDate to ToDate with a increment of one week.That means it should first check the first value of fromDate than add 7 days to the value and then again check from fromDate and this should continue till it reaches Todate.
[Code]...
View 1 Replies
Jul 25, 2011
I want to add or update columns using alter table if i am adding a new column i want show rror. I am using the code belowalter table Personal_Details alter columns DOB datetimef i uncheck the NULL to not NULL then it will shows column does not allow nulls; update fails;i want to insert the fields in between columns not at end.
View 2 Replies
Jun 27, 2009
-in my database..there are 2 tables..
1)Leave_application
2)Staff
-how do i type the code to minus out the number from "Leave_balance" (in the Staff table) with the number from "Days_apply" (in Leave_application table) eg: 10 days (from "Leave_balance" Staff_ID "S0001") - 2 days (from "Days_apply" ID "abc") = 8 days and then update the "Leave_balance" of staff_ID "S0001" with 8 days
View 3 Replies
