DataBinding: ComboBox.Text Not Updating When SelectedValue Changes?
Mar 16, 2010I have a ProbationComboBox with the SelectedValue bound to a RegistrationBindingSource, and the DisplayMember bound to a ProbationBindingSource. [code]
View 2 RepliesI have a ProbationComboBox with the SelectedValue bound to a RegistrationBindingSource, and the DisplayMember bound to a ProbationBindingSource. [code]
View 2 Repliesi want to set the current displayed item in combobox by combobox.selectedvalue = valuehere is the code
Combobox.selectedvalue = value
rivate Function populateComboSupplier(ByVal supplierID As Integer) As Boolean
Dim readSupp As New SupplierCRUD
[code].....
I'm rewriting a VB6 application in VB.Net. So far I have 2 forms, frmLocations (frm1) and frmLocationInfo (frm2). frmLocations has a combobox, cboLocations, from which a selection is made and an "Ok" button is clicked, which then loads frmLocationInfo. frmLocationInfo has a series of textboxes to display info corresponding to the location that was selected - Location, Location Number, Phone, Fax, Email. There are also 3 comboboxes on frmLocationInfo - cboDepot, cboFreight, and cboDispatcher. I need their text property along with items to be populated, also with data corresponding to the initial selection made on frmLocations. I'll spare you all the difficulties I'm having w/the other comboboxes, and instead focus on cboDepot. I have gotten it to populate its text property to display the corresponding Depot, however, the items are not populating and all you see now when you click on the dropdown arrow is only the depot that shows up in the text property.
Here is the code for this portion.
frmLocationInfo
Private Sub FillDepotCombo()
Dim sql As String = "Select distinct depot.depot_name, depot.depot_refnbr, locations.site from depot inner join locations on depot.depot_refnbr =
[Code]....
What is the meaning of 'selected value' in combobox properties?
I create a combobox with valuemember = ID (primary key, autonumber) and displaymember = name. How do I get it to select the row with ID of 10, for example?
[code]...
I'm using VB 2008. I'm looking for a way to take the value of the combobox after the user selects the right one. The combobox is databound and in List mode allowing selection of only the items in the box. I allow autocomplete by setting:
AutoCompleteMode = SuggestAppend
AutoCompleteSource=ListItems
So the user can key in the right value and the value narrows down each time. The user can press enter or just click somewhere else to select the value. I need a way to display the value of the combo after the selection is made but not each time a user presses an additional key to narrow down the selection.
I would like to assign cboBegCust.SelectedValue to c and cboEndCust.SelectedValue to d
Dim c, d As String
cboBegCust.SelectedValue = "customer"
cboEndCust.SelectedValue = "customer"
[Code]....
I bind a datatable to the combobox.DataSource on load. I then give the combobox aisplayMember and a ValueMember (2 different columns out of the datatable). In the SelectedIndexChanged of the combobox I would like to use the SelectedValue property of the combobox, just to test I MsgBox(combobox.SelectedValue) and I get "Argument 'Prompt' cannot be converted to type 'String'." Why isn't it displaying the value?
OnLoad
cbCISoftware.DataSource = dbMaps.Tables("maps")
cbCISoftware.ValueMember = "id"
[code].....
Is it possible to BOTH set a comboboxes datasource AND databind the selected value?Ihave 2 comboboxes on a form that I want to populate with data from 1 table,ut I want the actual selected values on each of the comboboxes to come from separate columns n another datasource Right now if one combobox changes, so does the other if that makes sense.
Here's a sample of code:
'Bind DataSource
With cboYields
[code].....
I have a question for a combobox in Visual Studio 2008 (VB)If illed a combobox from a table and the use the following statement: Me.cmbProduct.SelectedValue = 1 (or another number)The problem is now that in the form the value is selected but with a blue color. I have on my form several comboboxes but i don't want that blue color.
View 13 RepliesI have a datagridview combobox column with data bind into it. I would like to set it selectedvalue to a value by default. How can I do it? because it does not have any selectedvalue option.
View 2 RepliesI want to know how can i get selectedvalue of a DataGridViewComboBoxCell
View 2 RepliesI've got a ComboBox with an ItemsSource which I've bound to a List(Of String).What I'd like to do is have the XAML update a String property when the SelectedValue of the ComboBox changes. I've seen a whole bunch of examples for TextBoxes which use
Text="{Binding Path=MyString}"sort of stuff, but I don't really think that'll be the way to go if, in future, I need to change the ItemsSource to a List(Of ObscureObject)...
I have three tables Tasks, Notes & CallTypes Each item in Tasks and Notes has a relationship to CallTypes and my form edits work fine. However: Notes only belong to tasks, and when i update the note record we will need to change the CallType for the Task as well as for the Note and they could both be different.
I have the Notes working fine, but i cannot update the tasks. I have created a databindng on to a form from the datasources window. All the notes fields are ok and are working I then add the calltype field from the tasks, draged from the data sources window (i dont want all of the tasks fields, just the calltype).
The code does not through up errors, but when i save the form it only updates the notes and not the tasks.
I am tring to bind a data to listbox with where combobox.selectedvalue. My code is below; I am using data entity in wpf project;
Class Window1
Dim db As New AdvanceEntities
Private Sub Window1_Loaded(ByVal sender As System.Object, ByVal e As System.Windows.RoutedEventArgs) Handles MyBase.Loaded[code].....
Also I need to create a query with Join In statement. I need to get two table in one query, they have same values in USERID collumn.
In order to fill a datagridview according to the selectedvalue of a combobox I've tried creating a stored procedure. However, as I'm not 100% sure what I'm doing, depending on the WHERE statement at the end of my stored procedure, it either returns everything within the table or nothing at all.This is what's in my class:
Public Function GetAankoopDetails(ByRef DisplayMember As String, ByRef ValueMember As String) As DataTable
DisplayMember = "AankoopDetailsID"
ValueMember = "AankoopDetailsID"[code]....
guess it's down to the WHERE part of the stored procedure, but I need a way to pass the selectedvalue of the combobox into the @AankoopID parameter.
I have a WinForms app built with VB.Net in VS 2010, and I'm scratching my head over the following issue.I have a form with a combobox which gets bound to a datasource when the form is loaded:
With Me.cboCompany
.DataBindings.Clear()
.DataSource = Me.m_dsBidResults.Tables("Company")
.ValueMember = "company_id"
[code].....
This seems to work fine, as long as the user doesn't switch focus to some other control and then go back to the combobox. After switching focus, if the user then changes the combobox selection to the first item in the dropdown list (SelectedIndex = 0), the SelectionChangeCommitted event fires, but the SelectedValue remains set to the previously selected value. I've verified this by adding a message box in the above event handler, displaying SelectedIndex and SelectedValue side-by-side.
'add this to SelectionChangeCommitted event handler MsgBox(String.Format("Selected Index: {0}, Selected Value: {1}", cboCompany.SelectedIndex, cboCompany.SelectedValue))
This does NOT happen if the user changes SelectedIndex to anything other than 0; everything behaves as expected. I've verified that the table I'm binding to contains unique values for company_id and company_name.Do I need to use some other event to verify that the SelectedValue has actually changed?
WInforms Combobox SelectionChangeCommitted event doesn't always change SelectedValue
View 1 RepliesIs there any way to get the ComboBox SelectedIndex based on SelectedValue when Datasource property is set with DisplayMember and ValueMember?
View 1 RepliesI'm trying to bind CheckedListbox's Cheched items to Combobox my code is given below
Private Sub chklColumns_SelectedIndexChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles chklColumns.SelectedIndexChanged
cmbSort.DataSource = chklColumns.CheckedItems
End Sub
whenever I check an item first time it loads one item to the Combobox, but when I select second item still I have single item in the Combo...
I have a Form and I have a DataGridView in this Form. My DataGridView does have a Combobox Column, when I am trying to Databind this DataGridView into my Datatable, it gives me an error: DataGridViewCombobox Cell Value is not valid. I have read all other examples , but I did not get anything because I am new at it.
View 11 RepliesI'm having an issue with getting the errorprovider to work in a database application where I have put the error provider logic in a partial class and have a combobox value change.Either I set the bindings so that it works but any navigation in the binding navigator then updates the value of that combobox on every next previous etc or it never fires until the save. So there is no way to change the errorprovider setcolumnerror string to something new with out saving on every navigation move. After changing the selection in the combobox the row does shows dirty (rowstatus) so there is databinding but it doesn't fire the ColumnChanged event like textbox and other controls. Is there a way to keep all this in the business logic in a partial class?
Partial Class reportexecDataSet
Partial Class fuellogDataTable
Private Sub fuellogDataTable_ColumnChanged(ByVal sender As Object, ByVal e As
[code].....
I decided to iterate through the Data.DataTable and trimmed the values there.Utilizing SirDemon's post, I have updated the code a little bit:
[code]...
I know that on the DisplayMember line the .First.Item() part is wrong, I just wanted to show what row I am trying to designate as the DisplayMember.
I'm creating a composite user control and trying to exposing the controls as properties so that I can databind them from the form that I drop the user control onto. One of the controls I'm trying to expose is a combobox and I can't seem to figure out how to expose this combobox to the designer. I'm trying the following code that I've cobbled together from what bits of documentation I can find but so far no joy.
<Category("Data"), Bindable(True), _
Browsable(True), EditorBrowsable(EditorBrowsableState.Always), _
DesignerSerializationVisibility(DesignerSerializationVisibility.Visible), _
AttributeProvider(GetType(IListSource))> _
Public Property RollbackCombo As ComboBox
[Code] .....
What wrong with my databinding? How to correct the perfect binding with combobox and texbox.. When I select Projectname the other are changing except the email... Why the email is not changing?
Code:
commemails = New OleDbCommand
daemails = New OleDbDataAdapter
dsemails = New DataSet
dtemails = New DataTable
myconn = New OleDbConnection(("Provider=Microsoft.Jet.OLEDB.4.0;" & "Data Source=") + My.Application.Info.DirectoryPath & "SMRPsource.mdb")
[Code] .....
see what i have done wrong here?
Dim Formview3 As FormView = CType(FormView1.FindControl("FormView3"), FormView)
Dim dropdownlist1 As DropDownList = CType(Formview3.FindControl("DropDownList1"), DropDownList)
[code].....
VB 2008 .NET 3.5. I have a custom "Shipment" object that contains a list of "ShippingRate" objects. This list of "ShippingRates" is accessible through a property "Shipment.PossibleShippingRates." That property simply returns a copy of the list of "ShippingRate" for that particular Shipment.
My UI layer receives a list of "Shipment" objects from the BLL. This list is databound to a datagridview, and shows details relevant to the Shipment such as Shipping Address, etc.
I want to bind the "Shipment.PossibleShippingRates" property to a combobox, such that when the user changes the grid row, the combobox reflects the "PossibleShippingRates" for that "Shipment."
In addition, I need a way to store the "ShippingRate" they selected from the combobox for later use.
I have tried a few ideas, but none of them work properly.
I have a form, frm1 w/a combobox, cboLocations, which is being populated using a sql string. There is also a frm2 w/a series of textboxes and other comboboxes. I want it so that once a selection is made from cboLocations, the textboxes and comboboxes on frm 2 are populated with the corresponding data. Here is what I have so far:
frm1:
Public Class frmLocations
Dim conn As New SqlConnection("Data Source=f03d3s-dev01; Initial Catalog=dos_track;User Id=vbuser; Password=tran3;")
Dim depot_refnbr As Integer
Private Sub frmLocation_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
conn.Open()
[Code] .....
What's happening right now is that I make a selection from cboLocations on frm1 and click on the OK button, frm2 loads, but none of the textboxes are populating and one of the comboboxes, cboDepot, shows the different data when you click on the down arrow, but it's not displaying anything it its text field when frm2 loads.
I have the following code that populates a combobox:
With Me.ClassSelector
.DataSource = DataAccess.Utilities.ReferenceDataUtils.GetLookupTableData("Category_code_classes")
.DisplayMember = "Category_text"
.ValueMember = "category_class"
End With
However, the SelectedValueChanged event fires once when I set the datasource and again when I set the valuemember. In both instances there is a selected value, although that value was not selected by any user action, but rather because of the loading of the combo box.I don't think there's a 'SurpressEventFiring' property for the combobox, so how to you check to see if the change in the selection was a result of user action and not data loading?Perhaps I'm populating my combobox wrong?
edit: changed 'displaymember' to 'valuemember'
I got a combobox that I populate with items by using databinding options which works fine, but what if I only want to only select the distinct items, was trying to do that but no avail so far. if I could do that just by using an sqladapter in code but is that what I should really do ?
View 2 Replieshow to go about this? I have a form, frm1 w/a combobox, cboLocations, which is being populated using a sql string. There is also a frm2 w/a series of textboxes and other comboboxes. I want it so that once a selection is made from cboLocations, the textboxes and comboboxes on frm 2 are populated with the corresponding data. Here is what I have so far:
frm1:
Public Class frmLocations
Dim conn As New SqlConnection("Data Source=f03d3s-dev01; Initial Catalog=dos_track;User Id=vbuser; Password=tran3;")
Dim depot_refnbr As Integer
[Code]...
What's happening right now is that I make a selection from cboLocations on frm1 and click on the OK button, frm2 loads, but none of the textboxes are populating and one of the comboboxes, cboDepot, shows the different data when you click on the down arrow, but it's not displaying anything it its text field when frm2 loads.