DateTimePicker: Selecting A Range Of Hours Within A Single Day Only?

Dec 30, 2008

I'm looking for a way to use two DateTimePicker controls to select a range of hours and minutes within one day. That is, to basically select a 'starting time' and 'ending time'.I started with two DateTimePicker controls with the custom format of h:mm tt. I tried adding (on ValueChanged), a check that made the selected 'starting time' will become the 'ending times' minimum and vice versa, the 'ending time' becoming the 'starting times' maximum?

However, that approach didn't seem to work -- I was still able to select 11.00 AM on the 'ending time' and 1.00 PM on the 'starting time'. I have a feeling that the current day of the timestamp has something to do with it (e.g. the starting time is of the previous day, and therefore is less).I thought about changing to a combo box of preset half hour intervals throughout the day; however the minutes need to be more flexible than that... This is the code I ended up with for reference;

Private Sub DateTimePicker1_ValueChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles DateTimePicker1.ValueChanged

[code]....

View 4 Replies


ADVERTISEMENT

DateTimePicker: Selecting A Range Of Hours Within A Single Day Only

Sep 18, 2009

I'm looking for a way to use two DateTimePicker controls to select a range of hours and minutes within one day. That is, to basically select a 'starting time' and 'ending time'.

I started with two DateTimePicker controls with the custom format of h:mm tt. I tried adding (on ValueChanged), a check that made the selected 'starting time' will become the 'ending times' minimum and vice versa, the 'ending time' becoming the 'starting times' maximum

However, that approach didn't seem to work -- I was still able to select 11.00 AM on the 'ending time' and 1.00 PM on the 'starting time'. I have a feeling that the current day of the timestamp has something to do with it (e.g. the starting time is of the previous day, and therefore is less).

I thought about changing to a combo box of preset half hour intervals throughout the day; however the minutes need to be more flexible than that...

UPDATE:
Dan's comment below answered this problem... This is the code I ended up with for reference;
Private Sub DateTimePicker1_ValueChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles DateTimePicker1.ValueChanged

[Code]....

View 1 Replies

Forms :: DateTimePicker - Tab Between Hours And Minutes?

Jun 18, 2011

Is there a way to tab between the hours and minutes values when the format is set to time in the DateTime Picker? The default action is move to the next control. I have the ShowUpDown set to true. Do I have to set up separate controls, one for the hours and one for the minutes to get this functionality?

View 1 Replies

Selecting 2 Different XLS Columns To Be A Range

Feb 27, 2012

I'm tring to create chart from Column B (to be X axis), and column D (Y axis).when I set it as range: .range("B":"D") - it'll take also column C.How can I set range for chart to be column B and D only??

View 1 Replies

Selecting Multiple Dates In A DateTimePicker?

Mar 14, 2011

Is there anyway i can select multiple dates in a Date Time Picker in

View 1 Replies

VS 2010 Selecting Record From SQL Using DatetimePicker Value?

Mar 18, 2012

I am trying to select records from a table using the following command

SQLStr = ("SELECT ItemCode, PriceSold, WhenSold, WhoSold from SoldItems where WhenSold = '" & DateTimePicker1.Value & "'")
I get the error message

[code].....

View 4 Replies

Selecting A Date Range From An Access Database?

May 16, 2009

I have the following code to select records from an access table based on a date range. The user is required to select a week ending date (Saturday) from a datetimepicker field.The date field in access is formatted as short.The values in the database range from 12/04/2009 to 2/05/2009. When I select datetimepicker as 2/05/2009 (i.e. 2 May 2008), no rows are returned. Following is the resultant sql statement:

show: Select * FROM Work_Time WHERE WorkerID =1001 AND (WeekDate >=#26/04/2009# AND WeekDate <=#2/05/2009#)

However, if I select datetimepicker as 25/04/2009, the correct numbers of rows are returned. Following is the resultant sql statement:

show: Select * FROM Work_Time WHERE WorkerID =1001 AND (WeekDate >=#19/04/2009# AND WeekDate <=#25/04/2009#)

Private Sub btnGetTSData_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnGetTSData.Click
Dim dSelect As Date
dSelect = dtWkEnding.Value

[code]....

View 6 Replies

VS 2010 Selecting A Tab Page From Range Of Tabs?

Dec 18, 2010

I have tried the following:tabsmain.SelectedTab = tabNew

and tabsmain.SelectedTab = tabsmain.TabPages.Item("tabnew")

As per articles found through Google.

These don't seem to work though.

View 3 Replies

Asp.net Mvc - Selecting A Single Row Using EF In MVC 3?

Oct 24, 2011

I am trying to get back a single from from a EF database model using the below line of code..

Dim _classRoom As classrm = db.classrms.Select(Function(b) b.Course_ID = _CurrCourse.course_ref)

Where classrm is the name of the entity and db is declared as a new entity. What I am trying to do is select a row from the entity based on matching Course_ID which in this model is a string. So that I can later use the variable _classRoom to get other items out of the same row.. However I am getting the following error:

Unable to cast object of type 'System.Data.Objects.ObjectQuery`1[System.Boolean]' to type 'Trial_Online.classrm'.

I have to preform similar tasks with several different Entities but if I get pointed in the right direction I can manage from there...

View 2 Replies

Selecting A Single Row Using EF In MVC 3?

Apr 10, 2010

I am trying to get back a single from from a EF database model using the below line of code..

Dim _classRoom As classrm = db.classrms.Select(Function(b) b.Course_ID = _CurrCourse.course_ref)

Where classrm is the name of the entity and db is declared as a new entity. What I am trying to do is select a row from the entity based on matching Course_ID which in this model is a string. So that I can later use the variable _classRoom to get other items out of the same row.. However I am getting the following error:

View 1 Replies

Xml - Selecting A Single Node Using XPath

Oct 10, 2011

I'm simply trying to parse a SOAP Response and pull out the ResponseCode and UnconfirmedReasonCode Elements out of the following XML:

[code]...

View 1 Replies

Selecting Two Table Schema In A Single Adapter?

Apr 27, 2010

I am selecting two table schema in a single adapter.

da=new sqldataadapter("select * from emp;select * from emp1",con);
da.fillschema(ds,Schematype.mapped);

then i am inserting some rows manually on both tables.i want to update the dataset. so that each data table in the datast will be updated in database.how to do this? since i am facing problem that it is updating all the rows in single table.

View 1 Replies

Selecting Single Cell Data From Selected Row - DataGridView?

May 15, 2012

I have a datagridview with data in it, i have set it so you can only select the row and one at a time.However, i need to get the data from one of the cells in the selected row, i have tried this

View 2 Replies

Show Table Row While Selecting The Single Field From Listbox?

Mar 21, 2012

i am trying to make a vb.net project for a travel agency ..... i have make all of the content of it but i got stuck in listbox .... i have added onnfiled of sql table into the listbox and now i want that when i select the list box content then all the other fields of a the row will automatically come in the rest of the textbox so i can add and delete it manually....... here is my code..... of one form(i have made 13 forms like that)

[Code]...

View 1 Replies

Check Named Range Contains A Single / Multiple Cells?

Sep 23, 2010

I want to know how many cell a namedRange contains . or want to check either a named range contains a single cell or multiple cells.

View 2 Replies

Strongly Typed DataSet Return All Columns When Selecting A Single Column?

Jan 17, 2012

I am using a Strongly Typed Dataset as DAL. I want to return a single column from my table for that i wrote the code as

SELECT DISTINCT Floor
FROM Room
WHERE (Building = @Building)

But when i previewed the data, it shows me all the columns of the table with Null Value and the column with primary key has -1 value. This condition raise an Exception when i link this query to a ComboBox ..

cmbFloor.DataSource = da.GetFloorByBuilding(cmbBuilding.Text)
cmbFloor.DisplayMember = "Floor"

Error: Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints.

View 1 Replies

Random Number In Range Is Outside Range

Dec 14, 2009

I am using the following code in the Load method of a VB form to generate random numbers in the range 1 to 8. Without fail after enough loops the range is exceeded and 9 is the random number returned every time. The line using the Rnd function is from: Rnd Function (Visual Basic)

[Code]...

View 8 Replies

VS 2008 Error: Range Variable 'sender' Hides A Variable In An Enclosing Block Or A Range Variable Previously Defined In The Query Expression

Mar 25, 2010

I am getting the error:"Range variable 'sender' hides a variable in an enclosing block or a range variable previously defined in the query expression."for this

Imports System.Data.SqlClient
Imports System.Linq
Public Class Form1

[code]....

I can select any other item from the table without the error. "sender" has the same properties as "receiver" in the SQL table.

View 2 Replies

Is Running Multiple Threads Faster Then A Single Thread On A Single Core Cpu

Dec 23, 2009

Say I have a code with 3 methods that do some pretty intensive work. Would executing these methods on 3 seperate threads be faster then executing them one after the other on a single core cpu? And what if it's a dual core or HT?

View 8 Replies

Querying A Single Column And Displaying All Results In A Single Textbox?

Sep 5, 2010

I am trying to make a list, separated by a comma, of entries from a single column in a SQL database. I have been spending the last several days searching for a way to do this, but every thing I found either didn't work, or wasn't exactly what I was looking for.

The query will pull all the email address that are not null. What I need to know is how to take the result of that query and make it look like this:

email0@address.com, email1@address.com, email2@address.com, etc, etc, ...

I feel like I should know this, but for the life of me, I can't remember nor can I find it in any of the textbooks I have.

I am using Visual Basic 2010 and SQL Server 2005. I also have access to Visual Basic 2005 if needed.

View 2 Replies

SqlCommand Parameter / Replace A Single Quote With Two Single Quotes

Oct 23, 2009

I use SqlParameters when executing database statements. I know that I can replace a single quote with two single quotes... but in the past SqlParameters took care of this for me. I have two projects.. in one, the SqlParameter does this and it handles single quotes fine, in another, it does not and I'm at a loss why (I even copied and pasted the code):

[Code]...

View 9 Replies

VS 2008 Bind A Single DGV Cell To A Single Class Property?

May 7, 2010

I am trying to use the DGV to view various properties from a variety of different class instances. Is it possible to bind each cell individually?

View 9 Replies

Update A Single Row And A Single Cell In Ms Access Database?

Dec 3, 2010

I am trying to update a row or a single cell in ms access through vb.net. But when i update the text box named NRIC, say for example i want to update "s4522147B" to "tr4521856C" and mean while leaving the other fields the same.

But the thing is when i make the changes in nric.text (textbox), the dataset actually updates the whole column in the table instead of the selected textbox.

Below is my code for the update part

[Code].....

View 3 Replies

Using Range In VB When End Of Range Varies?

Jul 7, 2010

I'm using vb in excel 2007 and need to work through a range or array, the size of which varies from time to time.

The examples of using range always demonstrate using literals eg "A1:A25"

How can I programatically determine the end of the range - ie up to where the cells value is blank

And then can I use a variable in the range statement - eg .[A1:Lastcell]

View 1 Replies

Enter More Then 25 Hours Value?

Jun 16, 2009

I have DGV like parent form and detail form like child. I want to give ability to user enter time in detail form in format like HHH:mm, save that value in database and display it in DGV.How to format timepicker or maybe need to use other control to have ability enter time data in format like HHH:mm?

View 4 Replies

How To Add Hours Or Maybe Even Days To It

Nov 15, 2011

This Code allows you too countdown seconds and minutes but im not sure how to add hours or maybe even days to it,[code...]

View 7 Replies

Add 4 Hours To A Date Time Value

Nov 17, 2009

can anyby help me to add 4 hours to the following date time value [code]

View 4 Replies

Application Crashes After Few Hours?

Mar 27, 2011

I am writing a system that utilizes the Timer to execute a command after an interval of three seconds. The command is to send a trigger to my RFID reader and hence the program will then decode the received data and changed it to information. It runs fine for the first few hours, but it will crash after that and the error given is an "System.NullReferenceExeption - Object reference not set to an instance of an object." error. Initially, i thought that it might be something that relates to my comobobox selected index change event that might be causing the crashes, but yet the application is crashes after i removed the section.

I fail to find the reason of the crash, even after spend fewing days finding the memory leak or some other events that might cause the crash.

I have insert TRY CATCH METHOD, just to catch the exeption error message that might cause by one of the codes, but still it doesnt show me.

View 1 Replies

Application Only Runs For A Few Hours

Mar 17, 2011

I have 2 applications, 1 that goes out and grabs data every minute and inserts or updates that data depending on a time interval into sql tables, the other 1 goes out at the top of every hour and grabs hourly data. Both of these applications run perfectly fine when they are compiled and published to run on my development PC, both do xml validation and check for duplicate data prior to any sql insert so I know it's not getting SQL exceptions.

When I move them to the Production Server the 1 minute application will work for a few hours and then freeze up and stop working.The hourly application half the time won't work at all.

I've made sure to include a local copy of the references when I compile/build and publish the application. I've made sure the Production Server is up to date with the latest .Net framework.

View 1 Replies

Calculate Hours And Minutes?

Aug 11, 2010

I would like to calculate the difference between hours and minutes from one textbox and the hours and minutes from textbox two. What would be the best way to do this? I think DateTime would be the object to use, but wondered if anyone has any examples or better ways?

View 12 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved