Devexpress Gridview Delete Event Is Firing Multiple Times
Jul 21, 2010
I have a Devexpress Gridview that is linked to a delete, fetch and update stored procedure. The problem I am having is that when I run my program, select a row in the grid and press delete it fires the event multiple times. Specifically it deletes the selected row and then I re-fetch the data so the focus returns to the first row. Which is what I want.
Unfortunately it starts at the beginning of my list and goes down it row by row deleting each row it comes to. It then continues several more times after the rows are deleted. I know this because for each deleted row it asks me if I want to delete it. If I say no then the rows appear to disappear until I manually refresh it after the deleting is done. To make this even more random the second row always reappears after I manually refresh the grid.
[Code]...
View 1 Replies
ADVERTISEMENT
Apr 1, 2009
I'm trying to prevent a sub / function from firing multiple times on the same event.My app is for handling inbound phone calls (tapi).The app is supposed to route calls based on the callerid number.
aircode below:
Code:
Private Sub OnNewCall(ByVal sender As Object, ByVal e As NewCallEventArgs) Handles tapiManager.NewCall
if newcall.callerid = "5551001" then
redirect(newcall)
[code]....
If callA.callerid = "5551001" then redirect(callA)but, once it is redirected to the new extension, do not then grab the call from the new extension and try to redirect again (resulting in infinite loop).I realize I could use an integer as a counter, but the problem is, I might actually get more than 1 call at the same time from the same callerid number. And, all the calls would need to be redirected (once).the calls do have properties like (which are unique identifiers to each call):
Code:
phcall.id and phcall.hashcode
I'm thinking I need to put that unique id into a temp var / array to run a check against to see if it has been redirected, if it has then skip, if it has not then redirect.The app would run 24x7, and I don't want the temp var / array to get too big, and would want to have it clean automatically (up on a timer maybe?)(I'm guessing it would be a dynamically growing array.)
View 10 Replies
Feb 24, 2009
I have a DGV in VB.Net 2008 connected to an Access DB table. The DGV is not Read Only, but is full of read-only columns except for one, which contains a combo box. The combo box allows the user to select an outcome for that particular row, and then the program copies in a pre calculated value into the "Profit" column depending upon the item selected in the combobox. Then the user hits the Save button and the DB updates (currently via SQL methods in the XSD).
Easy enough so far.
Here is the code.
Private Sub DGUserBets_EditingControlShowing(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewEditingControlShowingEventArgs) Handles DGUserBets.EditingControlShowing
[Code]....
The problem I have is that it would seem that if a user selects the desired outcome from the combobox but does NOT hit Enter, and simply mouses on to a different combobox to again select the outcome for a different row, the first eventhandler is not disconnected and thus the events fire multiple times. This then causes various default MsgBox errors and brings up problems when the user tries to commit all changes to the DB/exit program etc etc.
What do I need to do? Do I need to .EndEdit somewhere appropriate to force the row to save the changes? And where should I call this?
View 5 Replies
Apr 25, 2012
I am trying to programmatically add an unspecified amount of new UserControls to a form. One will be added every time an entry is selected in a ComboBox contained within the UserControl. Problem is, the SelectedIndexChanged event fires completely erratically. Sometimes twice, sometimes 3 times, etc., but never just once. No matter how many times I set the combobox's SelectedIndex to -1, it fires at least once with a SelectedIndex of 0. Sometimes the Itemselected event fires multiple times inbetween SelectedIndexChanged events.
InvoiceEntry.vb snippet:
Public Event ItemSelected As EventHandler
Private Sub cboItem_SelectedIndexChanged(sender As System.Object, _
e As System.EventArgs) Handles cboItem.SelectedIndexChanged
RaiseEvent ItemSelected(Me, EventArgs.Empty)
End Sub
[Code] .....
View 1 Replies
Apr 30, 2011
url..I tried to change the combo box value and save the webpage data in string and finally extract my desired data. It works but unfortunately when the combo box value is changed it takes some times for webpage to update.
View 1 Replies
Mar 7, 2011
I am trying to delete multiple rows from a GridView but I am struggling to find out if a check box was checked.At the moment my code isn't attempting to delete anything just check which checkboxes were checked and which weren't. My attempt isn't showing any checkboxes as being checked and also seems to loop though the GridView rows twice!
.ASPX
<asp:GridView ID="gvImages" DataKeyNames="id" runat="server" AutoGenerateColumns="False" BorderWidth="0px" GridLines="None">
[code].....
View 1 Replies
Mar 20, 2009
I have a GridView and its DataSource is datatable.OnRowDeleting event of Gridview. I can't seem to delete that row when I click the 'delete' button that invokes the event to remove the row.[code]...
View 1 Replies
Feb 10, 2012
I have a DevExpress GridView whose cells are painted with a random color based on some condition. Now each color has a meaning and I want to show it as a legend. Number of colors used for each condition may vary.How can I do this. I'm using DevExpress 2009 Vol2, and .Net framework - 2.0 and WinForms?
View 1 Replies
Jul 19, 2010
I'm working on a .NET component that gets a set of data from the database, performs some business logic on that set of data, and then updates single records in the database via a stored procedure that looks something like spUpdateOrderDetailDiscountedItem.
For small sets of data, this isn't a problem, but when I had a very large set of data that required an iteration of 368 stored proc calls to update the records in the database, I realized I had a problem. A senior dev looked at my stored proc code and said it looked fine, but now I'd like to explore a better method for sending "batch" data to the database.
What options do I have for updating the database in batch? Is this possible with stored procs? What other options do I have? I won't have the option of installing a full-fledged ORM,Additional Background Info:Our current data access model was built 5 years ago and all calls to the db currently get executed via modular/static functions with names like ExecQuery and GetDataTable. I'm not certain that I'm required to stay within that model, but I'd have to provide a very good justification for going outside of our current DAL to get to the DB.
Also worth noting, I'm fairly new when it comes to CRUD operations and the database. I much prefer to play/work in the .NET side of code, but the data has to be stored somewhere, right?
[Code]...
View 9 Replies
Aug 9, 2011
I am trying to put an extra event in, UpdateID and it's not firing.
[Code]...
View 1 Replies
May 6, 2011
I have been looking for a solution to this for a while though and seen many posts that show me how to do it but yet I cannot get my SelectedIndex Changed event to fire when the DropDownList is changed.The DropDownList AutoPostBack is set to True,[code]
View 2 Replies
Feb 15, 2012
I am currently using DevExpress 11.2 within Visual Studio 2010. Currently I am using two DevExpress.XtraBars.BarEditItem which gives me two check boxes (with a label) in my menu bar (DevExpress.XtraBars.Bar) at the top of my windows form. Right now I have working code so that when one checkbox is clicked it unchecks/checks the other checkbox and executes code specific to that box. This works.
My problem is that the DevExpress.XtraBars.BarEditItem does not have a check changed event. Currently I am using the EditValueChanged event as the checked check box is set to True and the unchecked checkbox is set to false. However the EditValueChanged event isn't called until the checkbox looses focus. This doesn't work for me as I want it instantaneous. I looked into the itemClick and ItemPress events but they don't give me the new editvalue and if someone presses on the caption (rather than the box portion) it still fires. Is there someway to get the event right away??
I am looking in two different older projects (both in Visual Studio 2008 and using DevExpress 9.2 and 10.2) and it looks like it does everything the same way as me yet the EditValueChanged event fires right away without any lose of focus.
View 1 Replies
Apr 23, 2010
I've got a button inside a gridview to remove that item from the gridview (its datasource is a list). I've got the list being saved to session anytime a change is being made to it, and on page_load check if that session variable is empty, if not, then set that list to bind to the gridview.
Code Behind:
Public accomplishmentTypeDao As New AccomplishmentTypeDao()
Public accomplishmentDao As New AccomplishmentDao()
Public userDao As New UserDao()
[Code].....
View 1 Replies
May 8, 2012
I am dynamically adding a link button to every cell in a gridview. Adding the button works however the firing of the even handler doesn't. i need the linkbutton to call a function and pass some data for processing. My code is below. I have found solutions from the site that have gotten me this far.At the moment the gridview loads the cells with buttons in blue. when you click them they go back to plain text and no function is called.
[Code]...
View 1 Replies
Apr 1, 2011
Here is my code:
Protected Sub BookingsGV_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles BookingsGV.SelectedIndexChanged
BookingID = BookingsGV.SelectedValue
Dim query = From a In db.Approvers Where a.ApprovalStatus = False And a.BookingID = BookingID
Select a.ApproverEmail()
[Code] .....
When I click on a row for the first time it is selected but nothing fires and my details panel is not displayed. When I click for the second time I get the expected results.
View 1 Replies
Jan 6, 2012
I am currently using a DevExpress (10.2) Banded GridView within my Visual Studio 2010 project. It works great except I was have an area where I allow the user to choose which columns they want visible or invisible. I noticed that if I make all the columns within a band invisible the band still remains and gives an empty column in my grid. I was wondering if there is some way to automatically
View 1 Replies
Jan 18, 2012
I am currently using DevExpress 10.2 within Visual Studio 2010. In a previous question I was trying to print the current user view of a DevExpress GridControl with the user's choice of expanded or collapsed master rows and/or group sections. I was told this was not possible at this time. I have now decided to use the following code:
[Code]...
View 1 Replies
Apr 30, 2012
I have a gridview that contains data from a database somewhere in a sql server, so far so good, what i want to be able to do next is delete a row when i press the delete...Am new to asp.net and vbi will send the code and a printscree of the software:
ascx
<%@ Control Language="VB" AutoEventWireup="false" CodeFile="Admin.ascx.vb" Inherits="Admin" %>
[code]....
View 4 Replies
Apr 1, 2011
I want to delete record from GridView.Before to this ask for confirmation like "Are you sure to delete?"I used command field in GridView, [code] I wrote a function in javascript. [code] How I will call this on delete click.
View 4 Replies
Apr 30, 2012
I have a gridview that contains data from a database somewhere in a sql server, so far so good, what i want to be able to do next is delete a row when i press the delete..
i will send the code and a printscree ofthe software:
<%@ Control Language="VB" AutoEventWireup="false" CodeFile="Admin.ascx.vb" Inherits="Admin" %>
002<%@ Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit" TagPrefix="cc1" %>
[Code]....
View 1 Replies
May 25, 2010
I am using a monthcalendar inside of a panel. when the user changes the "showweeknumbers" of the calendar I need to move some label to the right of the calendar, but I also need to resize the panel. The problem comes into play when the user hides the weeknumbers, the monthcalendar resize event fires and the labels move, but the panel resize causes the month calendar to fire the resize event again, making the labels all out of wack...
View 1 Replies
Apr 1, 2012
I've been looking for a solution to this for several hours now and cannot find a solution.
The Scenario:I have a masterpage baseclass (called basemaster)All of my master pages inherit from basemaster
basemaster defines an event 'Public Event HandleClickEvent As EventHandler'I have a masterpage named master1
master1 defines an event handler 'Public Shadows Event HandleClickEvent As EventHandler'master1 has a user control named usr1 usr1 has a button that raises event ButtonClicked when clicked I have a page (thePage) that uses master1 thePage has a button click event handler that it registers like so: 'AddHandler Master.HandleClickEvent, AddressOf HandleTheClick' master1 has code something like:
Protected Sub Usr1_ButtonClicked(ByVal sender As Object, ByVal e As System.EventArgs) Handles Usr1.ButtonClicked RaiseEvent HandleClickEvent(sender, e) End Sub when thePage loads I see it register the handler on master1 when the button is clicked, Usr1_ButtonClicked is fired and I step through the RaiseEvent but HandleClickEvent on thePage is never reached.
View 1 Replies
Jun 9, 2011
i have a page which dynanically create a link when it load, after i click on the link it should loop in the database fetch all the record and display another set of link , then when i click on these link it should give me all information about this particular record it like this one
Q: when the page loads, it creates the first link which is associated with an event handler, it fire the first event handler (Getname) but it not firing the second event handler (GetnameDetails)
Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
If ViewState.Item("nameload") IsNot Nothing Then
If ViewState.Item("nameload").ToString = "True" Then
[Code]....
View 1 Replies
Jul 1, 2011
The following code was working the other day. Now it isn't. When I type a character in the textbox the event doesn't fire.
[Code]...
why the event would just stop firing?
I'm trying to make it so this the cursor will jump to the next textbox after the user enters 1 character.
View 6 Replies
Sep 21, 2009
OS: MS Server 2003
Visual studio 2005
I had a button on a page that worked at one time and all of a sudden stopped working.
[code]...
View 3 Replies
Jun 5, 2009
[url]...and have applied the vb code. The problem I have is that the user doesn't navigate within the datagridview. They click a save button on a toolstrip. As the user doesn't move from the current cell then the cellvalidating event doenst get fired. [code]...
View 5 Replies
Apr 28, 2009
My ie.documentcomplete is not firing from my installer but it works fine from my source.I don't know where i m going wrongmy working environment
For Each Me.ie In New ShellWindows
If GetForegroundWindow = ie.HWND Then
AddHandler ie.DocumentComplete, AddressOf _
[code].....
View 4 Replies
Aug 26, 2011
We're trying to design a toolbar to use as an addon in another program. we want to set one of the buttons so that when u single click it, the image on the screen is blanked out. And when you double click the same button, it blanks everything except the selected image. However the DoubleClick event doesnt seem to be working at all.
[code]...
View 7 Replies
Nov 21, 2011
I have two forms that I worked on separately, each has an event load button that works with a datagridview without any problem. but when I created a third form and moved the buttons on it and try to update the datagridviews on the two forms, it doesn't fire up here's my
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
[Code]...
View 8 Replies
Sep 20, 2011
Here is the .aspx code snippet.
[Code]....
Below is my databinding code. It is called from Page_Load()
[Code]....
Bind data to datasource of dropdown control when it is not postback Control was added from toolbox tried adding event handler in .aspx. Still did not work.
View 1 Replies
