I am looking to include in my word processor a drop down font selection button, much like that in MSword, where it shows the installed fonts an allows the user to pick one. It is for a rtb, so I'm not sure if it's possible. If it isn't, could you guide me into coding a button with say the text 'Arial' to change the selected text in my rtb to arial. Also, which fonts are supported by rtbes?
View 11 Replieshow do i develop a rich text document like MSword in my app?It should have the features like spell check etc .Or can i call MsWord on to my app?
View 3 Repliestext formatting in word document. i want to select a specific text in a document and format it.
Here's what i've got
Quote:
With WordApp.Selection.Find
.Text="word to find"
.Font.Color = Word.WdColor.wdColorBlue --> supposed I want to color it blue
End With
i have two pages.1.aspx and 2.aspx i have a drop down list on the first page and a back and sumbit button on the second page..If i make a selection in the drop down list and go the second page and then go the the first page again with the back button. the drop down list doesnt show the selection that i did.i tried the use "sessions" but didnt work, also tried postback but no luck. I read something about "Enableviewstate" also no luck.[code]
View 2 RepliesI am looking to after the user selects from a drop down to give read only access to the form( textboxes, buttons, etc).Upon the second selection the user would have read-write access and upon the third selection full access.Does anyoen have an example of how this might go ? I have the code in place which places the information in the drop down from the configuration table itself.
View 1 RepliesI would like to do a replace all using VBnet 2003 and MSword 2007.
I got to this
Dim Selection As Word.Selection
Selection.Find.ClearFormatting()
Selection.Find.Replacement.ClearFormatting()
[Code].....
It crashes EVERY line with the selection claiming that "Object reference not set to an instance of an object." I got the code by doing a macro recording and it worked fine as a macro but I do not want macros in my document.
I am reading datas from MSWord Document. I know how to read the file. the sample text in my MSword. C# code review checklist. My current client uses PSP extensively, so I've been putting together a checklist for reviewing C# code for use on our new project.
1.Are exceptions used to indicate error rather than returning status or error codes?
2.Are all classes and public methods commented with .NET style comments? Note that <summary> comments should discuss the "what" of public methods. Discussion of "how" should be in <remarks> blocks or in-line with the code in question?
3.Are method arguments validated and rejected with an exception if they are invalid?
4.Are Debug.Asserts used to verify assumptions about the functioning of the code? Comments like, "j will be positive" should be rewritten as Asserts.
5.Do classes that should not be instantiated have a private constructor?
6.Are classes declared as value types only infrequently used as method parameters, returned from methods or stored in Collections?
7.Are classes, methods and events that are specific to an assembly marked as internal?
8.Are singletons that may be accessed by multiple threads instantiated correctly?
9.Are methods that must be overriden by derived classes marked as abstract?
10.Are classes that should not be overriden marked as sealed?
11.Is "as" used for possibly incorrect downcasts?
12.Do classes override ToString instead of defining a Dump method for outputting the object's state?
so in this i need to read the question only. but when i am reading i am getting the hgeader text also.
Following is my code.
dt.Columns.Add("CheckList", typeof(System.String));
//Word.Application app = new Word.ApplicationClass();
object nullobj = System.Reflection.Missing.Value;
//object file = @"D:dbWordappCheckList.doc";
[CODE]..........
So using this code i can able to read the doc and fill the values in datatable.but i need to fetch the questions only. sor example in my doc sample 1st question is filling up as follows. C# code review checklist. My current client uses PSP extensively, so I've been putting together a checklist for reviewing C# code for use on our new project.
1.Are exceptions used to indicate error rather than returning status or error codes but i need
1.Are exceptions used to indicate error rather than returning status or error codes .header text i don't want. so how could i omit the headertext.
What is the name of the tool that contain MsWord and Excel in vb2008? and is there on the toolbox?
View 1 RepliesI'm using VB 2008 Express Edition , i wonder how to make a UI like MSWord 2007 with direct buttons and menu chages as we move middle mouse like this
View 4 Repliesput embedded word 2007 documents onto my VB.net 2005 program that i am designing but i keep hitting a brickwall.
View 1 RepliesI am writing an encryption program to become more familiar with MVB (2010). What it does is take each character in a file, convert it into ASCII, perform calculations on the ASCII value and then write to a file. (I change the extension from .docx to .txt, encrypt, decrypt, change extension from .txt to .docx)
The issue that I get is when taking the file from the encrypted state to the original. When I look at the before and after .txt values, they do not match up (I have tested the program on standard text with no issues). After doing a little looking, it seems that the special characters that show up when converting .docx to .txt are not all ASCII characters. Does anyone know anything about this, where to find information about the characters, or anything else?
I have created vb.net program to write data into MSWord file.First the data will be loaded into datagrid and on click of save button, it starts writing into a word file.The code which i used to write is as follows :
'Some code
Dim oWordApp As Microsoft.Office.Interop.Word.ApplicationClass
Dim oWordDoc As Microsoft.Office.Interop.Word.Document
oWordDoc = Nothing
[code].....
I have large amount of data to be saved into ms word file. more than 1000-1500 records at a time,so is there any better methods to save the data more fastly ?
I have a program for which I have developed a user guide. I have placed this user guide within the project directory. I created a MenuStrip Item by which to open the user guide in Word on the user's machine. I was successfully able to do this with the following code:
Try
userGuide = MSWord.Documents.Open("C:UsersadministratorDocumentsVisualStudio2010Project3UserGuide.doc")
MSWord.WindowState = Word.WdWindowState.wdWindowStateNormal
[code].....
The problem is, the path used to open the file will not exist on the users machine. This is a standalone system, so no file share can be created in which to place the document, therefore no common path can be coded.Is there a way to code dynamic paths? Perhaps something like:
userGuide = MSWord.Documents.Open("%windir%UserGuide.doc")
how to export data from msword document to Excel sheet using vb.net
View 3 RepliesI have created a vb.net program to write into msword file.I have used xslt for that.Now i have a problem of margin setting in the word file.what is the code to be inserted in xslt to set the margin of msword file.[code]
View 2 RepliesLet's say I have selected a few (or one) words. I want to add text before the selected word(s) and after the selected word(s). How would I do that?
View 2 Repliesbased on a selection of name and time i want to add a value or text in datagridview,but it doesn't return a value... this my code
Public
Sub Btnplanner_Click(ByVal
sender As System.Object,[code]......
I have a telerik radgrid, like shown underneath [code]When I click one of the rows, it will display the password of the clicked row, like so:[code]That works fine. I am proceeding this way because the decryption of the password is a rather complicated and long process, so decrypting one password at a time is less time consuming, especially when the user doesn't need all the passwords.When I have the password displayed, I'd like to be able to select the password in the grid to copy it. Unfortunately, the radgrid will fire the "RowClick" item command once more, and the row gets de-selected. Therefore, I cannot copy the passwords. My question is: Is there a way to cancel the itemcommand of a radgrid under certain circumstances? I'd like to be able to disable the itemcommand event when the password is already decrypted.[code]
View 1 RepliesI am a newbie starting to learn on how programming in vb language, and now I would like to know---> How to get selection text from any text editor such as in Notepad, Wordpad, MS Word, Excel, ...and so on ...to show in VB2010 Textbox.
View 2 RepliesI have a telerik radgrid, like shown underneath
| Username | Password |
-------------------------
| A_user | ***** |
[code].....
How do you code selection of text within a RichTextBox. I tried the following code and nothing happens.I would think this should select all text within the RichTextBox.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Me.RichTextBox1.SelectAll()
End Sub
I would think this would select text from a start point to an end point.
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
ss = Convert.ToInt16(TextBox1.Text)
se = Convert.ToInt16(TextBox1.Text)
Me.RichTextBox1.Select(ss, se)
End Sub
I do not want the text in my WebBrowser control to be selectable. How would I do this?
View 4 Repliesi want to do the following : select text in a web browser control, then click a button. When the button is clicked , the selected text should be copied to a richtextbox.
the main problem is how to copy the selected text from web browser control?
I am trying have a data grid selection populate a form. I am new to this.Basically I have a connection persistance object and I would like to call that and call a stored procedure with the value of the selection. The datagrid is bound to an object.
[Code]...
I have a listbox (20 Items) with multiselection and label that disply the selection and one button. So I wrote (it works fine)
[code]...
Now when I click on button the label show lets say Item2,Item5,Item10,How do I take off the last ","
somthing like that Item2,Item5,Item10
I used to do: Dim s As String = Trim(Label1.Text)Label1.Text = s.Substring(0, s.Length - 1) but it give me an error converting intiger to string
I have a combobox on a form with the dropdownstyle set to drop down. Users can either salect a value from the list, or type in any value they wish. This all works fine. However, when one particular item in the list is selected I wish to set a different value. Unfortunately I don't appear to be able to set the combobox Text property from within any of the events that fire when the selected item is changed.
[Code]...
I have a list box created, and a rich text box. I have an item Fire Ball in the list box would like to have a description in the rich text box when the item is selected in the list box for some reason this code isn't working..
Code:
if listbox.selecteditem = "Fire Ball" then
richtextbox.text = "Description"
end if
I have a few lines in an rtb. e.g:
1. radjesh
2. radjesh
3. radjesh
now I select the 3 lines and press a button. The output should be (for example):
<start>
<line>1. radjesh</line>
<line>2. radjesh</line>
<line>3. radjesh</line>
</start>
I'm trying to select all nodes with text that contain a certain word (ex: Company) because the word needs to have a register mark.
Here is part of the XHTML (this <p> is inside a table cell).
<p>
<strong>
<a style="color:#0E5A8B; text-decoration:none" target="_blank" href="http://www.trekk.com">
[Code]....
My goal is to just select the 2nd one, the <span> tag and am not sure why <p> tag is also being selected. If it selects <p>, but why wouldn't it also select the <strong> or <a>, and why not the <table> or <td> that contain the <p>?
osheet.Range("A1").Select
'The line below is the one I would like to know how should I write it in VB.NET:
osheet.Range(Selection, Selection.end(xlDown)).Select
[code]......