I have created a vb.net program to write into msword file.I have used xslt for that.Now i have a problem of margin setting in the word file.what is the code to be inserted in xslt to set the margin of msword file.[code]
View 2 Replies
It seems when I change some code while working with practice files I get green veritcal lines in the left margin of the code page I am writing. What does it mean?
View 1 RepliesI want to create the xslt file programmatically by using vb.net. & i want to write some nodes & subnodes in that file .
View 2 RepliesI've built an app, that draws text to four rectangles on a pre-printed page with a design, I'm wondering what the margin refers to?
Also our printer doesn't print all the way to the edge, there's a white border, about the height of this little guy:If I printed from a printer that prints to the edge, will the text be in the same position as it would be if it was printed with the border around it, the text should be in the exact same position right?
1. How to get 0 padding/inner margin in the cells? I want just the border as a colored line at the next close pixel to the control in the cell. Or if border set to none, I want the controls with no gap.
2. How do I actually add/remove rows& columns? I thought this was by setting the .ColumnCount property, but if I set it to 3, and then try to access the third column, it gives exception, so it's obviously just two columns, although it also looks like 3 on the form. ? I created it in designer with 2 columns though. But I don't understand how this hangs together..
Dim z0, z1, z2 As New ZedGraphControl
z0.Dock = DockStyle.Fill
z1.Dock = DockStyle.Fill
[code]....
I am exporting data from vb.net to excel and it is dropping the leading zero when its displayed on excel. How can I avoid the dropping of leading zero? I read the solution of adding a single quote but it makes my excel sheet column ugly. Also users will complain if they see a single quote on zip code field.vb.net code
Response.AddHeader("content-disposition", attachment)
Response.ContentType = "application/vnd.ms-excel"
Response.Charset = ""
the stored procedure outputs XML and it is transformed by XSLT before it is displayed on EXCEL
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="/">
<HTML>
[code]....
adding a single quote or manipulating excel sheet with column formatter (general/numbers ) etc. I don't want user to make any changes on excel to get the display properly when the excel is displayed from web page it should be all set with proper formatting. also we have no control over client excel software?
I am using VB.net (FormView and ObjectDataSource) and Sql Server 2005.
I want to get last inserted @@identity in table on FormView1_ItemInserted
Protected Sub FormView1_ItemInserted(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.FormViewInsertedEventArgs) Handles FormView1.ItemInserted
End Sub My issue is that I want to redirect my FormView to readonly mode after FormView1_ItemInserted but for that I need to show the inserted record in readonly mode and that is only possible if I get my last inserted @@identity.
Been using C# and code snippets and fill 'em in and hit "Enter" and POOF there you go, all done.
So how the heck do I do this in VB? Example: "property" TAB TAB brings up the snippet. I fill it in just fine .. NOW WHAT? Hitting enter just give me a new line. ESC doesn't do anything. CTLR-K CTRLX doesn't either.
What's the secret? How do I get the snippet to accept my entries and unsnippetize itself into inserted code?
I have read a few chapters, and researched a few websites but none of which fulfil my question, which is where should I put this If statement
Public LoginName As String
Public Password As String
LoginName = txtUserName.Text
Password = txtPassword.Text
[Code]...
The idea is once the user has finished inputting text into both text-boxes the image on the button changes from a no-go to a green-submit button but unsure what declaration it would go under and which element. I have tried several form elements and declarations but not having the desired effect that I would like
I have previously made a game in VB.I have created an input app where the user types in their name.(Like parental Settings)and how long they want app to stay open.I want the input app to first execute the second app then type info into appropriate boxes.But then close app after specified time for instance 5 minsYou enter text on web via WebBrowser1.Navigate Then "GetElementById" to pick the appropriate text box to drop data into. But how can i do this on vb for another app - execute app then enter text?
View 2 Replieshow to use contains() function in xslt..
View 1 RepliesLet's say I have an RTB with the following text:
blah blha
nanna
nahei8
crap
more crap
I place the caret right next to "nanna", and using some code, I insert "NewData", so now the RTB is:
blah blha
nannaNewData
nahei8
crap
more crap
How can I place the caret next to NewData?
I have a issue with my DataGridView. It's bound to a DataTable at form load. I have a sub wich handles data recieved from a serialport. Inside that sub I'm adding a row to my datatable. That works fine, but to make the row visible in my datagridview, I have to either click on the row, resize the form so that the DGV dissapears and then appears again, manually call DataGridView.refresh or something like that. Why isn't the DataGridView automatically redrawn when a row is added inside a sub like that? One solution is to add a timer where DataGridView.refresh is executed every second, but it doesn't seem like a good idea
View 4 RepliesI currently have a Binding Navigator inserted on a form. I also have various fields from a database which I'm using with my Visual Basic application.In my database I have a field that shows the customers id number. What I am trying to do at the moment is find a way to be able to search for a specific customer id and displays that customers information in a pop-up box as part of the program.
View 3 RepliesI wonder how I can validate that the GPS coordinates are inserted in the right format.
Like 38.722617
nserting values from a datagridview into an access db. However the values are wrong. As you can see in the code, I've made variables to check what values are fetched from the datagridview, and those values are correct. But in the db there are other values. What's going on?The thing is some of the fields are run-time-created comboboxes and there are also datagridviewcheckboxes. But like I said, the values in the t1...t7 variables are correct.
Private Sub DataGridView2_RowLeave(ByVal sender As System.Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles DataGridView2.RowLeave
Dim Monda2 As New OleDb.OleDbDataAdapter("select * from congregation", Moncon)
[code].....
Basically what's happening is that the XML nodes themselves aren't changing position. So I figured my XSLT was missing something.[code]...
View 2 RepliesI have below xsl code but it is not working, could anybody please guide me.
<xsl:variable name="indent">
<xsl:if test="@type='Text'">
<xsl:if test="@required='yes'">[code]..
I need to assign return ValidateText(this( onkeypress even if inside xml the required is yes.
I got a textbox, listview and button. i need to get text from textbox inserted in listview by pressing a button every time i press the button i need the text in textbox getting removed. and start a new line in listview. i searched for it on the forums. could only find a few results for other versions of Vb
View 6 RepliesI am looking to include in my word processor a drop down font selection button, much like that in MSword, where it shows the installed fonts an allows the user to pick one. It is for a rtb, so I'm not sure if it's possible. If it isn't, could you guide me into coding a button with say the text 'Arial' to change the selected text in my rtb to arial. Also, which fonts are supported by rtbes?
View 11 RepliesI am reading datas from MSWord Document. I know how to read the file. the sample text in my MSword. C# code review checklist. My current client uses PSP extensively, so I've been putting together a checklist for reviewing C# code for use on our new project.
1.Are exceptions used to indicate error rather than returning status or error codes?
2.Are all classes and public methods commented with .NET style comments? Note that <summary> comments should discuss the "what" of public methods. Discussion of "how" should be in <remarks> blocks or in-line with the code in question?
3.Are method arguments validated and rejected with an exception if they are invalid?
4.Are Debug.Asserts used to verify assumptions about the functioning of the code? Comments like, "j will be positive" should be rewritten as Asserts.
5.Do classes that should not be instantiated have a private constructor?
6.Are classes declared as value types only infrequently used as method parameters, returned from methods or stored in Collections?
7.Are classes, methods and events that are specific to an assembly marked as internal?
8.Are singletons that may be accessed by multiple threads instantiated correctly?
9.Are methods that must be overriden by derived classes marked as abstract?
10.Are classes that should not be overriden marked as sealed?
11.Is "as" used for possibly incorrect downcasts?
12.Do classes override ToString instead of defining a Dump method for outputting the object's state?
so in this i need to read the question only. but when i am reading i am getting the hgeader text also.
Following is my code.
dt.Columns.Add("CheckList", typeof(System.String));
//Word.Application app = new Word.ApplicationClass();
object nullobj = System.Reflection.Missing.Value;
//object file = @"D:dbWordappCheckList.doc";
[CODE]..........
So using this code i can able to read the doc and fill the values in datatable.but i need to fetch the questions only. sor example in my doc sample 1st question is filling up as follows. C# code review checklist. My current client uses PSP extensively, so I've been putting together a checklist for reviewing C# code for use on our new project.
1.Are exceptions used to indicate error rather than returning status or error codes but i need
1.Are exceptions used to indicate error rather than returning status or error codes .header text i don't want. so how could i omit the headertext.
i have this XML and i want to sort all the MESSAGE/DATA/TRANSACTIONS/TRANSACTION With XSLT by "POSTED-DATE" and return the sorted XML to work with.
i have hours reading about XSL and trying to do that but it doesnt work.
<DATA RESULT="TRUE">
<ACCOUNT NUMBER="MyNumber" CURRENCY="MyCurrency" TYPE="MyType" />
<TRANSACTIONS>
[Code].....
In my xslt file I want to apply templates to the xml but only if an id of that piece of content within the xml matches an id calculated in vb.[code]...
ContentparId is the attribute parId of Content in the xml. I want to compare this with mnPageId which is defined in vb (a foreign reference is passed through and the pageId that matches that foreign reference is returned)
I know the rest of the code does what I want it to do because if I manually change mnPageId for a correct pageId then I get the xml that I want back.
So, is it possible to use a variable that has been declared in vb in xslt?
What is the name of the tool that contain MsWord and Excel in vb2008? and is there on the toolbox?
View 1 RepliesI cannot find the xsl debug option in the xml option within VS 2008 express edition. Is it not available. What should we do to get that enabled.
View 1 Repliesi have one page and the record about 40 rows in cell datagridview.
Who can teach me ...
1. if more than 40 rows ..go to new pages including headerText
2.how to using..... e.Grapics.DrawingString(????e.margin+++++)
3.i not understand e.marginbound.left ?
I can print and almost everything works. Basically I used KB 811401 to create a RichTextBoxPrintCtrl.dll and add it to my tool box. I have a Page Setup and a Page Print. I call Setup and change the margins. Then I call print. But I always get default margins. The margin settings I put in the Page Setup don't "take".
Here is my relavant application code.
Private
Sub btnPageSetup_Click(ByVal
sender As System.Object,
ByVal e
As System.EventArgs)
[Code] .....
So, I'm adding a label programatically and I'm in need of altering the top margin a little bit to the value 8. I can't do that the obvious way, so what's wrong with my thinking?
Dim LabelAdapter As New Label
LabelAdapter.text = "Adapter"
LabelAdapter.Margin.Top = 8
This gives me the error "Expression is a value and therefore cannot be the target of an assignment".
I'm using VB 2008 Express Edition , i wonder how to make a UI like MSWord 2007 with direct buttons and menu chages as we move middle mouse like this
View 4 Replieshow do i develop a rich text document like MSword in my app?It should have the features like spell check etc .Or can i call MsWord on to my app?
View 3 Replies
