The codes:
aDiv.contentEditable = True
can work well in english version OS but when when the application ran on french
windows xp, an error (after translated to english):
Incorrect argument or procedure call.
i am using VS 2008 and just started to work with XAML and WPF. while opening in page(.xaml) in design mode i'm getting the error like this "Only TrueType fonts are supported and this is not a TrueType font".
View 7 RepliesI am trying to build an error handler for my desktop application. The code Is in the class ZipCM.ErrorManager listed below.What I am finding is that the outputted file is not giving me the correct info for the StackTrace.Here is how I am trying to use it:
Try
'... Some stuff here!
Catch ex As Exception
Dim objErr As New ZipCM.ErrorManager
[code]....
What is happenning is the .GetFileLineNumber() is getting the line number from 'objErr.Stack = New System.Diagnostics.StackTrace(True)' inside my Try..Catch block. In fact, it's the exact line number that is on. how I can catch the real line number the error is occuring on?
I try to use a special font in my programm xxxxxx.ttf (true type font)and i got this error "only tryetype fonts are supported .this is not a true type font "i used it before with same programm but since i installed a very old version of xp i got the error.
View 2 RepliesI am using the following
Dim cmC As New MySqlCommand()
Dim daC As New MySqlDataAdapter()
Private Sub btnClientSave_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnClientSave.Click
[code].....
When I add 1 client it works fine, but when I try adding another I get the following error:
When MySqlCommandBuilder.ReturnGeneratedIdentifiers is true, MySqlCommand.UpdatedRowSource must be set to None.
In ASP.net using VB, how can I Convert a number e.g 4.5 to french (4,5).
And a quick question, when storing this in database, will It store as 4.5 or 45?
I am reading in a text file and displaying the data read in in textboxes. Some of the characters are accented French characters which are not displaying correctly in the form. This prob does not exist with VB6 on the same machine. What do I need to set/change in vb.net to display these characters properly.
View 3 RepliesI know that I can get the month name for a date, e.g.:
Dim myMonth As String = MonthName(Month(myDate))
which gives me January, February, etc.What I need is to *also* get the month name in French, for a bilingual app I'm working on. Note that the app decides the language to display based on values supplied to the program, not the current locale settings.Is there a simple, canned way to do this or should I use a lookup array for the month names? Or, something else?
Rudimentary Translator gives English words and their French and German equivalents. Store these words in a text file and read them into a structure having a member for each language. Write a program that sorts arrays according to the English words. The program should then request an English sentence as input from the keyboard and translate it into French and German. For example, if the English sentence given is MY PENCIL IS ON THE TABLE, the French translation will be MON CRAYON EST SUR LA TABLE, and the German translation will be MEIN BLEISTIFT IST AUF DEM TISCH.
Note: Assume that the only punctuation in the sentence is a period at the end of the sentence. Use a binary search to locate each English word.English words and their French and German equivalents.
English French German
YES OUI JA
TABLE TABLE TISCH
THE LA DEM
[code]....
I was wondering if anyone here has an idea how to decrypt French letters.I've managed to decrypt English ceaser cipher but have no ideas how to begin with for French as it does not include the letters K and W. So I will have certain letters translated wrongly.
I am using ASCII, c = char, Asc(c), using the ASCII numbers to decrypt.
I have a program which is in English language processing. It reads text from a textbox, then parse the text. Now, I want to use it for french, so, I copy/paste french into the textbox, then it shows ? for certian characters.
how to make it accept french text?
I have my form set in french as well, and it automatically changes the text format to use ','. However When I try to insert my values into the database it says cannot convert nvarchar to decimal? Worst case, Is there a way I can disable the numbers from changing to use ',' and just use '.' always regardless what language it is? My working language is vb.net?
View 1 RepliesI have a button on a web page labeled "Send to MS Word" that redirects to an .aspx page that on-load includes the following:
Response.ContentType = "application/vnd.ms-word"
Response.AddHeader("Content-Disposition", "inline;filename=""BOC ScoreCard.doc""")I also build a Dataset that gets info from an MS SQL database. The information within the database includes French Accent Characters, for example: When the user clicks the button, everything works ok except the French Accent Characters.
I've been trying to display some information from an Oracle Database(10G) in a VB.NET program. Some of this information is in french and I need to display the french accents correctly. The e with an accent chr(233) is my test case, and it keeps coming back as either an inverted question mark (with Ole DB), a question mark (with the System.Data.OracleClient) or an 'i' (with ODBC and DSN)..
View 2 RepliesI have my form set in french as well, and it automatically changes the text format to use ','. However When I try to insert my values to the database it says cannot convert nvarchar to decimal? Worst case, Is there a way I can disable the numbers from changing to use ',' and just use '.' always regardless what language it is?
View 1 RepliesI have a piece of code which loads either french or english text and 2 link buttons that allow to switch between.
<%
if publierFR = 0 Then
if publierEN = 0 Then
[code].....
Outlook is causing some problems when being passed a mailto string with accented characters in it. Changing the codepage for my entire webpage that has this string on it solves this problem, but that causes other problems in the system, so I would not like to do that.
A string like such returns a lot of garbage characters:
"mailto:Helpdesk-someemail@email.com?subject=Mon bâtiment / Départementé / Bureau n'est pas répertorié"
Meanwhile, this cuts off the character after the "D"
"mailto:someemail@email.com?subject=Mon bâtiment / Départementé / Bureau n'est pas répertorié"
I have written a program that if all if statements are true then it closes out with me.close() without displaying the form. If a if statement is false, then the form shows with some text as to why it failed.The program works perfectly....until I change the form setting "top most" to true, if the if statements are true, instead of the form closing as it should, I receive ObjectDisposedException was unhandled Cannot access a disposed object. Object name: 'Form1'.
View 1 RepliesI know that
Public Incognito As Boolean
is a variable called "Incognito" that is class-wide that is a boolean.My question is that is there a form-wide variable form that can like communicate with different forms. So if a variable in form1 is "True" than, how can you make a variable in form2 turns to "True" too?
I wanted to create my own type that acts like the Boolean type, except I wanted to use Yes and No instead of True and False.I kind of got close but it wasnt exactly what i was going for here's what i have:
[code]...
so i have to use an integer when i dim it like:dim b as MyBool = 1 then when you look at it in the watch window b = {Yes} so i could settle for that, but with a boolean you can do this:dim b as Boolean without setting it to anything it defaults to False mine however, is Nothing. 2 things: 1. How can i get mine to default to No 2. How can i make it work like this: dim b as MyBool = Yes instead of having to use the integer this is not a requirement for anything I just wanted to know how to do it
This is probably a basic question, but I have never used this syntax before. Can someone tell me in detail how this expression evaluates to true? [Assuming IsOdd is a boolean type].
Dim i As Integer = 3
IsOdd = (i And 1) = 1
The expression 3>6 AndAlso 7>4 evaluates to
A. True B. False
The expression 4>6 OrElse 10<2*6 evaluates to
A. True B. False
The expression 7>=3+4 OrElse 6<4 AndAlso 2<5 evaluates to
A. True B. False
The VB code below assigns True value assign to the function. But when I convert to C#, I am getting an error like we can not assign True to a method. How can I assign true to the method in C#. This is my VB code:
Private Function KeyOK(ByVal sKey As String) As Boolea
KeyOK = True
sKey = Trim(sKey)[code]......
I'm pretty new to Vb so I'm not sure of all the correct terminology etc.
Private Sub Add_mousedown(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Add.MouseDown
Dim Addition As Boolean
[code].....
I have an many class with BeginDate and EndDate properties, I want to build generic method that return one object as List of the same type but with BeginDate=EndDate. [Code], but I faced a problem that Type.IsGenericTypeDefinition of my classes is false. How can I set it to true?
View 2 RepliesI've got this function which converts wav files to mp3. I call this from my button_click handle. The thing is, when the conversion is started, the rest of the code in the button_click handler continue, while the conversion is happening in a different thread. Now, I need the rest of the code in the button_click handle so continue to try until a boolean is true, so that I know that the conversion is done before the rest of the code continues. I've tried using Do While but it didn't seem to do the trick. Perhaps it's just me though..
View 2 RepliesI'm trying to make a textbox at runtime, Dim t as Control
t = New Textbox
t.Multiline = True
t.Size = New Size(300,120)
Form1.Controls.Add(t)
I found out that you can only size a textbox when Multiline is set true. And that's the problem. When I use t.Mutiline = true I get the error " 'multiline' is not a member of 'system.windows.forms.control' "
I've searched the internet for hours without result.
I have the function below which I call onload, I want to be able to check the checkbox (chkactive) if the ProjectStatus is set to True, how can I do that please.[code]
View 4 RepliesI'm reading in a RTF file that I want to search by either using WholeWord or MatchCase search options.
atm I have this:
If (chkWhole.Checked = False) And (chkMatch.Checked = False) Then
'ERROR - MUST SELECT A SEARCH OPTION
[code].....
I know I'm being quite pedantic here. But, what is the right way to get a true 50/50-chance with a generated random number? Say, to simulate the flip of a coin. [code] I know this difference is close to nothing, but I'm doing some calculations on bell curves, in such a way that it requires true 50/50-chance.
View 33 Replies