Error Reading Image From Networkstream
Jun 1, 2011I have some troubles reading an image from a networkstream.Every time the when program runs this procedure its shuts down without a warning.[code]...
View 11 Replies
ADVERTISEMENT
Use For Reading From A Networkstream?
Jan 8, 2010I know it's subjective but this was the result I came up with based on the answer to me previous question and it seems a bit "slapped together", as I have changed it quite a bit:
[Code]...
Basically is there a better way to write this (even just part of the code) or a more efficient way to do it?
Basically the code is there to read all the bytes from a networkstream 1024 bytes at a time. And each time it reads the bytes it puts into one array which is returned.The thing i think might be better is only Redim byteTempbuffer if intRead is less than 1024 (the redim is to prevent empty bytes from being added to the end of the array when there are less the 1024 bytes left to read from the networkstream) (basically is it more efficent to Redim every time or to go through and if statement and redim only if needed)
Load Image From Networkstream As Bmp?
Mar 18, 2010How would i load and image from network stream as bmp?For example the client sends a image thats jpg. but the server displays the image on a picture box property as bmp.
View 3 RepliesParameter Is Not Valid Error When Reading From An Image Property?
Apr 20, 2010I am getting a "Parameter is not valid " error when reading a value from an Image property and I don't know why.
Writing to the property works just fine (MyControl.EditImage = PictureBox1.Image) .
Reading from the property causes an error (PictureBox1.Image = MyControl.EditImage )
The Property looks like:
Private mNewImage As Image
Public Property EditImage() As Image
Get
[Code]....
Networkstream Connection Fails & Httpwebrequest Connection Not Reading Fast
May 17, 2012I am connecting to a data stream that pushes data continuously and when I tried to set up a network stream I just could not connect and kept getting the 'not found' error. I used the httpwebrequest with webrequest.keepalive = true and started to consume the data by reading into a buffer and then appending to a stringbuilder. Once the stringbuilder reaches max size I flush it to a text file. The problem is that I get disconnected from the data stream because I am not reading the data fast enough. I need to keep the connection open and read the data while ensuring data gets stored in text files. If I use method "CONNECT" it does not connect to the stream.
While (True)
webrequest = DirectCast(Net.WebRequest.Create(url), HttpWebRequest)
webrequest.Credentials = New System.Net.NetworkCredential(username, password)
webrequest.Method = "GET"
[code]....
should I increase the buffer size and if so what is the max? that would mean I can read more data at a time and keep up with incoming push. Disparate here.
ACtually also I noticed that it gets stuck on this line
numbytesread = responseStream.Read(bufferread, 0, BUFFER_SIZE)
and then eventually I get disconnected.
Networkstream Connection Fails & Httpwebrequest Connection Not Reading Fast Enough
May 17, 2012I am connecting to a data stream that pushes data continuously and when I tried to set up a network stream I just could not connect and kept getting the 'not found' error. I used the httpwebrequest with webrequest.keepalive = true and started to consume the data by reading into a buffer and then appending to a stringbuilder. Once the stringbuilder reaches max size I flush it to a text file. The problem is that I get disconnected from the data stream because I am not reading the data fast enough. I need to keep the connection open and read the data while ensuring data gets stored in text files.If I use method "CONNECT" it does not connect to the stream.[code]
View 1 RepliesSends Data On A Networkstream Through A Tcp Connection - Error "An Established Connection Was Aborted By The Software In Your Host Machine"
Aug 18, 2009I have a program that sends some data on a networkstream through a tcp connection.
[Code]...
Error BC30136: Error Creating Win32 Resources: Error Reading Icon '"Recycle Bin Empty.ico"'
Jan 27, 2012I try to compile a project with msbuild.exe I have this error :
vbc : error BC30136: Error creating Win32 resources: Error reading icon '"Recycle Bin Empty.ico"' -- The filename, directory name, or volume label syntax is incorrect.
This icon is the Application icon which is in the same directory of the project.vbc is started with /win32icon:"Recycle Bin Empty.ico" parameter.Don't know why MSBuild can't reach the file.
Reading Image From Path?
Nov 7, 2009i want to read a image from a path. i know how to do what but i get a error "Parameter is not valid." Here is my code
Dim SAVE_image As String = Application.StartupPath & "\bg" & "\" & ComboBox1.Text
Dim myImage As New Bitmap(SAVE_image)
PictureBox1.Image = myImage
[Code].....
Get Reference To The Error Image That Is Loaded By Default If There Is No Image When Using Imagelocation?
Dec 8, 2009How do get reference to the error image that is laoded by default if there is no image when using imagelocation I am trying to build an IF statement to only do something if picbox is not = error image
If PictureBox1.Image <> Image.error.system.drawing.Bitmap Then
Loading Image While Reading From Database?
Feb 9, 2012I have a code wherein datagridview will load according to the query given.I have no problem with that but when i put a loading image while reading the database, loading image wont work as well as if i put only "Please Wait" to a label.I searched from google and said that backgroundworker sahould use to this problem. But how can i use the backgroundworker?i have no idea about it.
View 5 RepliesReading Cell Values In An Image?
Mar 10, 2011I want to read the values of the 8 neighboring cells in an image as shown on the attached file. For example, the green cell is the home cell and it has 8 neighbors (cells from 1 to 8 as seen on the attached image). It will read all 8 neighboring cells then it will move one cell to right (now pixel 4 will be home pixel). Again it will read its neighboring cell values and then it will move to next pixel etc. It will continue till to the end (the last cell or pixel of the image).
View 18 RepliesVS 2008 Reading Image Files?
Feb 1, 2010First of all, I have an image file, below is an image of squares with stripped lines,showing where each square is going to be. Each square is exactly 1cm and each space between squares is also 1cm.Fig 1 - Position of Each SquareLater on, these squares are going to be black, and for each black square, the value is one, if it's blank then the value is 0. Here is some examplesFig 2 - Completed Squares, this one reads "101", one square is filled, then a blank square, then another filled square.Fig 3 - Completed Squares, this one reads "010", one blank square, then a filled square, then another blank square
View 3 RepliesWriting A Jpeg Image And Reading?
Jan 6, 2011I have created a form that enables the user to add details about a bicycle, the functionality of it is fine. I have thought about allowing the user to write a jpeg image that relates to the ike being added and then at a later date when they want to search for this bike the image is also read to the same form as the details of the bike on the search form.[URL]..
View 3 RepliesReading Pixel Color From A Image In Picturebox?
Mar 9, 2003how to get color form a certain pixel from a bitmap image, but i cant find function getPixel in the picturebox object.
View 5 RepliesVS 2010 - Reading Image Meta Data
Apr 14, 2011I've been using the process shown here: [url]
For including images in my database, what i would like to do during the import process is capture some of the meta data to store against fields in my database as well.
In this case we will be using iPhone 4s which i believe capture data in EXIF format.
I did a bit of looking around on my own and apart from: [url]
VS 2008 - Read A 16bit Binary File (tif Image) And Pixel Values Of The Image Ranges From 1200 To 4500 - EndOfStreamException Unhandled Error
Mar 18, 2012I am trying to read a 16bit binary file (tif image) and pixel values of the image ranges from 1200 to 4500. I tried to use BinaryReader using ReadUInt16 but I get EndOfStreamException Unhandled error. ReadByte method works fine with an 8bit tif file. I do not know how to read a 16bit image file using binaryReader. Shouldn't I use ReadUInt16 since values of pixels range from 1200 to 4500?
[Code]....
How To Know Where The Other End Of The NetworkStream From The 'server' Computer
Jul 3, 2009How do I know where the other end of the NetworkStream from the 'server' computer? I have been looking at the following code that comes from a post out here, and am wondering where I can tell where I am going to send back to(URL/port)?
Private Sub DoListen()
Dim incomingClient As System.Net.Sockets.TcpClient
Do
[code]....
NetworkStream - Finding Out What Is Being Received
Sep 5, 2010This question is about trying to find a way of telling what is being sent of the NetworkStream as in whether it is Text or Binary. For example I could have a Server program on my Girlfriends computer and the Client Program on mine, two functions on each:
Server: Textbox for catching any text sent (like a chat for example) and a function for receiving files (like an EXE or others)
Client: Textbox for sending text to the client (again like chat) and a function for sending files (again like EXE or others)
How do you code the server to tell it how to determine which is which (Binary or Text) and further more what if the file being sent isn't an EXE, what if its an image or a text file or other type? I already know how to send a file through to the server and put it back together on the other side but thats only sending an EXE file. I'd want to enable an update functionality in the server so it can receive a message from the client saying its sending through an update which once the server gets the message it will know what to do on the other end (i.e. stopping itself whilst the update.exe is running and copying over the new file).
Networkstream File Transfers?
Jun 22, 2010I am attempting to write a vb.net 2008 application that will allow me to send files from a server to a client based on a request. I am going to post the same console application code below. When i run the server and the client on the local machine, i can get my file update and it works just fine. When i go to a different machine on my network and attempt to connect to the server and download the file, i get the correct file size but the file, when i attempt to run it, says "not a valid win32 application". Now with a little testing, this can be any executable that i send over the network through my update software.
------
SERVER
------
Imports System.Net.Sockets
Imports System.IO
[code]....
Networkstream.read Not Responding?
Jun 8, 2012I am new to vb.net programming. I am trying to connect to a device using TCP/IP.I am trying to send a command "Z<CR>" where Z is a character and <CR> is a ASCII value of 13. How can i do this in one statement?
I have written following code, but my program stops responding at .read statement:
[Code]...
Sending An XML File Via NetworkStream?
Jun 28, 2010I have an XDocument ready to be sent out via Network stream, what do I need to get it working? I am connected via networkstream and can send regular text, but I don't know how to send an XML Document, I use the networkStream.write() function to send in text.
View 2 RepliesSending Some Data Over A Networkstream
Jul 31, 2009I am sending some data over a networkstream. The datasize is 97 The buffersize is 1. Data is a list of bytes. When the bytecount reaches 94 the do while loop exist itself.
[Code]...
Reading Image Path From Text File And Add It To Thumbnail Control?
Jul 14, 2011I have a CheckedListBox and a thumbnail control and I am trying to save and retrieve back the images along with their path.
I need to show their image path in the checked list box which I am able to do but I am unable to get the images.
I want to know how to read Images from the saved text file and display it in the thumbnail control.
Here is the code:
Private Sub LoadProject_Click(ByVal sender As System.Object,
ByVal e As System.EventArgs) Handles LoadProject.Click
Using ofdlg As New Windows.Forms.OpenFileDialog
[Code].....
VS 2010 - Error: Error 1 Operator '=' Is Not Defined For Types 'System.Drawing.Image'
Jan 24, 2011If i type this in:
CODE:
I get an error: Error 1 Operator '=' is not defined for types 'System.Drawing.Image' and 'System.Drawing.Bitmap'.
I have also used 'is' instead of '=' but that doesn't work either.
.NET Socket Networkstream.read Different Results?
Jul 22, 2012I am doing client/server socket based project and currently I am having some troubles with the recieved result.What I mean ... this is part of the client which is receiving
tcpClient.Connect(address, Port)
Dim
bytes(tcpClient.ReceiveBufferSize) As
Byte
[code]....
Where file is just a simple file name send from the server. What I recieve is for example: test.txt%00%00%00%00%00%00%00%00 etc. The server and the client are using the same encoding ASCII.
Networkstream Write Only Returns First Result (need All)?
Mar 19, 2012My code looks very similar to this post Read bytes from NetworkStream (Hangs), which I copied below. ( I realize this is c# - I need a vb solution)
[Code]...
My issue lies in this:
I have a form that takes user input on which tif file(s) to find (which ends up being the getBytes(message) ). When one does this, it always returns one result - the first tif file that fits the criteria, However, I know in certain instances I should recieve more than one match.
Then I send the results to a picturebox and should be able to scroll through results (which this part works fine)I've tried a few ways to get multiple results, but maybe I'm missing the obvious? My best guess is using the asyncronous beginread/write.I've attempted using a for loop but I end up getting a bunch of the same tif files as a result..
Not Receiving All Data With Networkstream.read
Dec 11, 2011I'm using the following code to get newsgroups from a server[code]...
When I execute the code, the routine only receives one block of the data. However, if I go into debug mode with a breakpoint at the loop instruction, I receive all of the blocks of data.Am I missing something in the code, like a wait or something, that would allow the program to receive all data like happens with the debug?
Not Receiving All Data With Networkstream.read?
Dec 8, 2011I'm using the following code to get newsgroups from a server:
sendBytes = Encoding.ASCII.GetBytes("LIST active microsoft.public*" & ControlChars.CrLf)
networkStream.Write(sendBytes, 0, sendBytes.Length)
[code].....
Read And Evaluate Data From NetworkStream?
Apr 18, 2011I have a device that is continuously sending text over a TCP port and I want to write a VB.net application that will read and evaluate this data. Each line of text that arrives over the port can be of varying length and each value in the line is separated by a comma. I need to separate out these values in order to take various actions based on their contents.
The following code appears to read the NetworkStream fine but when I try to read the data into an array and output one field into a text file the code is only catching a few lines of the high number coming through the port.[code]....