What would be the best solution to find the version of SQL a backup was taken from?
I'm trying to find the first string to confirm its 2005, 8.00 for sql 2000 etc..I was trying to search using a file stream, but having problems searching for a string or group of bytes.
How they relate and differ from each? What are the best practices for version control? Is there a primer about publish online? Or a good book?
And is it possible to make ClickOnce and a msi in one solution of VS 2008? If so, is there any conflict or pitfall?
BTW I am using VB if that makes any difference.
The message "Could not find file 'Microsoft.Windows.CommonLanguageRuntime, Version = 2.0.50727.0'." started appearing after I attempted to publish my software. All previous versions of my software are affected as well. I have two projects in the solution. Both are written in vb. All versions used to work fine.
View 2 RepliesI am getting the following error when i try to publish my application with the checkbox for ClickOnce Security On. Could not find file 'Microsoft.Windows.Common-Controls, Version=6.0.0.0, Culture=*, PublicKeyToken=6595b64144ccf1df, ProcessorArchitecture=*, _ Type=win32'. [projectname ]
[Code]...
I want my application to do something special :D.. jks
I just want it to compare assembly version to the file version something like this (btw i also want it if it is the same i want it to enable a button):
Private Sub StartSplash_Load(sender As System.Object, e As System.EventArgs) Handles MyBase.Load
If Assembly Version = File Version Then
[Code].....
so how do i detect Assembly & File version numbers?
I'm working on a VB.Net Project and someone suggested me to use the VB2008 IF(a,b,c) operator. I think I am using VB2005, but I can't find where to confirm that information.
Also, is the server's IIS version important for the VB version used? (I think so, but I'd like confirmation... And a way to know what IIS version match what VB version).
I just got application written in ASP.NET and VB, can i deploy it on any IIS?Are there any files in project with that kind of information?
View 4 RepliesI have code below which determines the version of Access.It runs quickly on most PCs. We also have four terminal servers. On two of the terminal servers it runs fine. On the other two, this code takes over 15 seconds to run.All four terminal servers have Access 2003 runtime. I can't figure out why it would take longer to run on two servers. Would it be permissions? Or some mistake in the way the Access runtime was installed?
' Determine the Access version by creating an
' Access.Application object and looking at
' its Version property.[code]......
I have developed a windows based application using visual studio 2005 called DMS. On the client side, this application runs on asp dot net framework 2.0. We have created its setup file which has to be installed on the client pc. After the installation of the application, some of the users get the error message as:
DMS.exe - .net framework initiation error Unable to find a version of the runtime to run this application
(I have also attached the screen shot of the error message.) Trouble shooting done by me:
a. I had tried the re-install Dot Net Framework 2.0.
b. Scanned the PC for virus attack.
c. Install dot net framework 2.0 first and then the application.
d. Un-install and re-install the whole application.
But none of the solution works. The only thing that works temporarily is un-install the whole application and re-install it. Then it works for a few hours.
I have developed a windows based application using visual studio 2005 called DMS. On the client side, this application runs on asp dot net framework 2.0. We have created its setup file which has to be installed on the client pc. After the installation of the application, some of the users get the error message as:
DMS.exe - .net framework initiation error Unable to find a version of the runtime to run this application
(I have also attached the screen shot of the error message.)Trouble shooting done by me:
a. I had tried the re-install Dot Net Framework 2.0.
b. Scanned the PC for virus attack.
c. Install dot net framework 2.0 first and then the application.
But none of the solution works. The only thing that works temporarily is un-install the whole application and re-install it. Then it works for a few hours.
I have an application written using Visual studio 2005 (in VB.Net). When I run it on any machine I get "unable to find a version of the runtime to run this application and this same application successfully some other PCs[code]...
View 2 Repliesi've built my first exe and when i try it, i got this message:
unable to find a version of the runtime to run this application.
i would be happy if it said what is the needed runtime.
can someone tell me what i miss to run it?
I have an application written using Visual studio 2005 (in VB.Net). When I run it on any machine I get "unable to find a version of the runtime to run this application" and this same application successfully some other PCs..[code]
View 7 RepliesI'm trying to find an updated version explaining mouse events. All I want is to move a picture box to a place i clicked on the screen.
View 1 RepliesWe have a VB .Net application that is targeted to the .Net Framework version 2, over the past couple of days users have been reporting that they are getting the following error message when running the program?
View 8 RepliesI have developed an application using VB.NET (.NET 2.0). I have put an exe on 4 client machines, it works fine on 3 clients but fourth gives me the following error:
Unable to find a verison of the runtime to run this application
I have .NET 2.0 framework installed on the fourth machine.
I am writing a backup program that zips files. Using some sample code I have the following that creates a zip file. Problem is it does not get any subdirectories or files. Where am i going wrong?
Dim azFileNames() As String = Directory.GetFiles(SourceFolder)
Dim objCrc32 As New Crc32()
Dim zipStream As ZipOutputStream
[CODE]...
Alternativley, there is another component to the zipping dll that I could probably bypass the above altogether. It is: FZ.CreateZip(DestFile, SourceFolder, True, "", "") Where DestFile is (Output stream as system.io.stream). I'm trying to read all the files, directories, sub dir and files, etc from a specific location, let's say 'My Documents' into Destfile in which the FZ.CreateZip zips the file. FZ is FastZip which is from icsharpcode.net. They have c# examples, but that's greek to me. I'm trying to just learn VB!
I've been using a piece of code I found that reads in joystick movement into my VB application using DirectInput. Building an executable works great, the program operates as should be, however when I publish my program for final deployment, I get the following error:
"WindowsApplication has encountered a problem and needs to close. We are sorry for the inconvenience."
Here's some of the error details:
EventType : clr20r3 P1 : windowsapplication.exe P2 : 1.0.0.0
P3 : 4c0f1ae6 P4 : microsoft.visualbasic P5 : 10.0.0.0 P6 : 4ba2183b
P7 : 88 P8 : 8 P9 : system.io.fileloadexception
And then a second error pops up shortly after:
AppName: windowsapplication.exe AppVer: 1.0.0.0 AppStamp:4c0f1ae6
ModName: kernel32.dll ModVer: 5.1.2600.5781 ModStamp:49c4f482
fDebug: 0 Offset: 00012afb
The errors only occur once I try installing the program and just before the application loads.Here's the code for the program:
Imports System
Imports System.Windows.Forms
Imports Microsoft.DirectX.DirectInput
Imports Microsoft.DirectX
[code]....
they need to make some compare version between host version and client version.. and each 1 version different will download the file to the client..[URL]..with both example, how can i make a program in VB.NET just like i said just now?
View 15 RepliesCheck file size and take backup and re-create file? I am using this function[code]...
View 4 RepliesI am refactoring an old program to use VS2008 (instead of VS2005) and the 2003 Crystal Reports merge modules no longer work on the client machine. I am using the CR version bundled with VS2008. Neither the CR10 merge modules downloaded from the SAP site work, nor the CR x86 msi.
Could not load file or assembly 'CrystalDecisions.Windows.Forms, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
I`m making a program.I`d like to know how to make a code which will navigate to my website and find if there's a newer version of my launcher..I`ll search some codes now, If I find some interesting codes i`ll post here so u can upgrade or tell me how to correctly use them for my auto-update.I cannot publish my Launcher unless I`ve an Auto-Update in my Launcher.
View 1 RepliesI am trying to upgrade a project from VS2005. It is a VB.NET project B that depends on a C# project that references a C++ dll, A.dll. I am getting an error saying 'Unable to find assembly A_class, Version 2.0.0.0, Culture=neutral, PublicKeyToken=null'. The targeted platform of the C++ project is 4.0 and since that project depends on others, I can't downgrade it. But I did set the platform for the VB.NET project to 4.0. What else does the Version 2.0.0.0 refer to ? I have tried to create a brand-new project and added the vb forms into it after I have built it successfully. The C++ dll is in the output directory, if the VB project doesn't find it there, it doesn't get to this point. During build. I either get no error (but forms don't load) or I get 2 errors (one for each form):
View 1 RepliesI am trying to do a back up of files and was needing to know how to do something like
[Code]...
how to make a back up file using mysql xampp?
View 1 RepliesIs it possible through the use of a batch file, I'm trying this code:
mysqldump --host=localhost --user=root --password=nitoryolai -R hospital >E:wampetcdb-backuphosp.sql
Then vb.net will execute the batch file through s.d.p.s("b.bat")But it doesn't work, it only creates an empty .sql file.
I am using SQL server express 2005 as an backend. I created a backup file programmatically. If I use same server , then it restore the data successfully. however if we try to restore on different server, then it fails. and throw following message:
"The Backup set Holds a backup of a database other than the existing 'DatabaseName' database. RESTORE DATABASE is terminating abnormally."
On both server, Sql server instance name and database name is same. How can I resolve this error?
How can i backup my mssql database using the save file dialog?
View 5 RepliesI have my desktop app, bound to an access database. I want now to improve a button so the user can make a backup of the *.mdb file.So i used this
If FolderBrowserDialog1.ShowDialog = Windows.Forms.DialogResult.OK Then
If FolderBrowserDialog1.SelectedPath <> "" Then
FileCopy("BDGRACIA.mdb", FolderBrowserDialog1.SelectedPath & "/BDgracia.mdb")
End If
End If
It works fine when i try the app from within Visual Studio. But when i install it it won�t find the database because it was installed elsewhere.Is there a way to control where the DB is installed and follow that route? Does this depend on the OS the app is installed? Or did I face the problem wrong and i should do something completely different with my button?
how to load a .bak file of database backup in sql server 2005 using vb.net 2008 windows application?
View 5 Replies