Form Unconditionally Closing When "OK" Button Is Clicked
Sep 11, 2009
Using VB 2008: I have two command buttons on a form called "cmdOK" and "cmdCancel" with respective captions of "&OK" and "&Cancel". The cmdOK command button is not linked to the form's AcceptButton property, while the cmdCancel button is linked to the CancelButton property.
The code below illustrates the contents Click event of the cmdOK command button which correctly handles cmdOK.Click
The form is opened with a ShowDialog() method.
Whenver the cmdOK button is clicked, the form closes, even if txtExpression = "" and the Exit Sub is consequently triggered.
I want it so when the "x" button is clicked a message box will appear saying "Are you sure you want to exit?" then if "yes" it closes and if "NO" it stays open. so my code is:
Dim a As Integer a = MessageBox.Show("Are you sure you want to exit?", _ "Vice Versa 1.0", _
CODE:...................
This should work, no? When i debug my project clicking "no" still exits my program. Is this just because it's in debug mode or am i missing something here?
Also no warnings or errors. Is there a way i can make my game pause when the message box shows? I only have it working to if the users presses "p" on keyboard. But also want game paused when message box shows, without pressing "p"
I have already done the creation of button and the dragging of button at runtime already.But now i need to know how do i save the last dragged button on the form and also detect the name of the last clicked button.so lets say i now drag a button to coordinates 25,254. so when i exit the form and the next time i launch it, the button will still be at 25,254. and this one will go on for the number of button i created like 100. so when i launch the form the 100 button will be at the exact position where i last saved them.the second part is lets say i created button1 and button2 on the form in runtime. so when i clicked the first button, it should display button1. and if i clicked on button 2, it should say button2. same goes for like 100buttons.
Is there a *simple* syntax that will close a form when a button is pressed and leave the application completely if there is only one form? In vb6 it is, e.g. Private Sub Command2_Click() Unload(me) End Sub I have got as far as knowing its Button2_Click...
My Problem is that I have a form that when a button is clicked loads a new form - code below. I want to fill a list view with data from a database in columns but that isn't the problem: Whenever I run the program and try to open the new form, the program runs up to the Rec = Connection.execute line before going back to the first form where I opened it up.
Public Class Form2 Public Const ConnectionString As String = "Data Source=PeopleBase.sdf" Dim connection As New ADODB.Connection Private Sub Form2_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load [Code] .....
I should also explain that the database is a local one and there are no errors or warnings that show up, it just runs like the while loop part isn't there.
okay on my main form i created an instance of another form
Dim secondform As New frmSecond and i called it with this
secondform.ShowDialog() okay now when the secondform pops up there is a "OK" button and "Cancel" button. how can i tell which button was clicked? If "OK" was clicked i want to perform a task, otherwise nothing happens..
I have created a form in VB and have coded a Clear Form button into it. The issue I am having now is coding the 'Submit Form' button to have it email the completed form to 2 employees in the bank that I work at. The form will be uploaded to our server for other bank officers to complete and then submit.
I'm making an equation program and I want to have a main menu where the user can select an equation and then when one of the buttons is clicked, it closes the "selection" form and opens the appropriate form. For now I just have it set to show the proper form (for example, Form3.Show) but when I try to do something like Me.Close() after it, everything closes instead of keeping Form3 open.
I also need to know how to make the same button create a folder to save a txt file in. I havnt yet figured out how to save changes made into my program, that way next time i open it, i can continue where i left off.
I am trying to update my form once the delete button is clicked. There are several fields like Name, Date, Date of Birth and so on. Once I delete a record I want the form to automatically load with new / updated data. This form fetches data from MS Access using OLEDB I have spent a long long time trying this but did not get any solution.
programmer and anything related with IT. i'm trying to create a program for my internet cafe wherein i would need 2 forms, 1 which will contain the transactions and 1 to log in/out customers. I was able to make this using excel but am currenty having a hard time now creating the program with VB2010, because syntax/formulas seemed different from that of excel2010... i have so many questions that i would like to ask, but i'l start with loading a form(for logging in/out) by clicking the Log-in button.
what i used before when i created a userform in excel is this: Private sub LogBut_Click() logForm.show
Form1 is a mdi container. It has a bunch of forms that can load inside of it as mdi children. If I close each open form inside the form1, and then click the red X at the top right, application exits fine.If I click the red X without closing the forms inside I get: An unhandled exception of type 'System.CannotUnloadAppDomainException' occurred in mscorlib.dll
Additional information: Error while unloading appdomain. (Exception from HRESULT: 0x80131015) However I can break from it. How do I get the application to not show that error? What must I do to fix those inside forms or close when the red x is clicked?
I am creating a visual basic program, which acts as a very simple GUI for another program. I have built the whole Visual Basic project, but I am unable to do one part, the most important part you could say. I have a button (button1) on a form, when the button is clicked, I want it to run a program, named 'mover.exe' which is located in the SAME FOLDER that my visual basic program will run from. The directory of this folder will change. So, there are two problems I have:
1 - To make the program run the .exe program when button1 is clicked (it also must be run with administrative privileges). 2 - To make the program always look for 'mover.exe' in the folder in which it is started from.
Is there any way I can find the exact reason a form is closing ? To be more specific , I'd like to find when a form is closing :1) because the user pressed the X button on the upper right corner2) due to code (Me.Close , MyForm.Close etc)I know I can use the FormClosing event and use this code :If e.CloseReason = CloseReason.UserClosing Thenhowever it seems that the CloseReason.UserClosing catches both cases (closed by te X button or by code) . So , is there any way I can find exactly the reason a form is closing ?Back in VB6 , the correspondent UnloadMode variable of the Form_Unload event could be "vbFormCode" which indicated specifically that the form was closed by code
form1 have four buttons, i want to set a label text in form2 according to which of the button on form1 is clicked.below is what i tried so far.on form1 each of the button click event i made it focus
Private Sub Answerbtn3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Answerbtn3.Click Me.Focus() Form2.Show()
and on form 2 load event i have
Private Sub FinalAnswer_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load If Main1.Answerbtn1.Focus Then Label2.Text = "You choosed option '
[code]....
the above code displays only the first condition ("You choosed option 'A'"") on the label when any of the button is clicked?
I am currently working on a program in VB that is 480,600 and am using a panel with a picturebox inside of it so that I can use scroll bars to view a chart in the picturebox since my form will be so small. Since viewing a large chart is pretty irritating using scroll bars to some, what properties can I enable or disable to get the panel and picturbox to expand also when the Form Maximize button is clicked rather than staying the same size up in the top corner?
I have a VB.NET 2010 Forms Application which includes a form with a textbox, and two buttons which I call from the main form using .ShowDialog
I've messed with something such that I can no longer prevent the dialog from closing when the user clicks the Ok button but has entered invalid information.
Here is the handler for the OK button's click event:
Private Sub cmdOK_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdOK.Click If SomethingIsWrongWithWhatTheUserEntered Then
I'm trying to create a save button on my infopath form that when clicked, it automatically saves the infopath form to a directory. I'm running into some issues, I thought it would be simple but is quickly becoming confusing. [code] I've tried searching all over but couldn't find an answer that pertained to xml documents such as an infopath form.
Is there any way to skip a the validating event of the active control when the close button of the form is clicked. It is very annoying when user wants to close the form, but due to the validate event of the active control, it asks for the valid input. The user is forced to give valid input to close the form. I have searched a lot for this on net but no any proper solution could be found.
I have a windows applications. Form 2 is child form of Form1 . Basically when button on form2 (child form) is clicked, it raise an events, which writes something in testbox on form1 (parent form). This is my code
parent form form1
Public Class Form1 Public mycount As Integer
[CODE]..............
This is the first time I am tring to use events.. I am not sure what's going wrong.. the textfill event is never called from form1.
Dim frm As Form For Each frm In Forms Set frm = Nothing Next frm
The above code is what I used in VB6 to close all forms associated with my programs before my program closed. I have been searching for information on how to make sure all forms are closed when closing a VB2008 program.
I have seen info on using the Project Property Shutdown mode When startup form closes and I currently have this set.
Is this all that is really necessary? Will the garbage disposal close everything else to free up RAM?
Also, if I have several forms open and want to close all from the main form without closing each one individually, what is the best approach? Is there a collection like in VB6, go through the collection, compare it to the name of the main form and close it if it is not the main form?
I have the following code to close a form which is a child. The problem is that when it closes, it closes the MDI parent too.
Private Sub frmTransaction_Closing(ByVal sender As Object, ByVal e As System.ComponentModel.CancelEventArgs) Handles MyBase.Closing If ListView1.Items.Count >= 1 Then
I already created a button "enjoy button" that i want to move in a form when the "timer start button" is clicked.how do link the timer to the "timer start button" and make it move?
this is what i tried so far..then am blank first
Code:Public Class MainForm Dim DX As Integer Dim DY As Integer Dim X As Integer Dim Y As Integer
I have numerous buttons on a form, one each to select a playing card (52 buttons). When the Card(button) is selected I want to highlight it by changing the border from black to Red, then if reclicked from change back from red to black, easy enough (if then else). So that I do not have to copy this code 52 times I wanted to create a module as follows:
Sub ChangeButtonBorderColor(ByRef ButtonName) If (Equals(ButtonName.BorderBrush, Brushes.Red)) Then ButtonName.BorderBrush = Brushes.Black
How to make a link button visible after another button has been clicked in asp.net(vb) in button_click()
it says error as "Object reference not set to an instance of an object."
i've done this in my code
Protected Sub InsertButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Dim receipt As LinkButton = FormView1.FindControl("LinkButton1") ' receipt.Enabled = "true"
