Get Second String Of My Searched?
Dec 27, 2011Is it possible to get the second string of my searched string?[code]...
View 9 RepliesIs it possible to get the second string of my searched string?[code]...
View 9 RepliesI am able to add all the strings on the list box but I need to copy the string before the delimeter comma. this is the text
[Code]...
I have Search form where I display the searched content on a datagrid. What I want is to display the content that I have on the datagrid on a crystal report.
View 15 RepliesI need to be able to get the Row number of a searched item. Just say in column A you have all the names of fruit and veg and you typed in Banana in textbox 1 you click search , which looked for the word banana, which was located in row 10 but you didn't know it was in row 10 and put that Row number reference. Where I want it so I can use it to edit the whole row. I need to find what I am looking for then be able to make a reference to the row found as I need to be able to correct the 10 columns. What I've got going into Excel - I need to be able to search for Job Number and get its reference so I can correct data if user makes a mistake.
Here my excel transfer section:
'Create and open the correct excel workbook
objexcel = CreateObject("Excel.Application")
objexcel.Workbooks.Open(opening & "Queries Report " & Now.Year & ".xls")
' objexcel.Workbooks.Open("C:Central systemsCentral systemsFoldersDepartment LogReportsQueries Report 2010.xls")
TextBox1.Text = opening & "Queries Report " & Now.Year & ".xls".ToString
[Code] .....
Had this issue I was wondering about. This is what it actually DOES then Ill say what I want it to DO. It grabs the word from a notepad I have saved in the directory, and brings it forward onto a form in designated area's and after whomever is done with the word and definition. It'll tell you how many times it's been looked up. Problem is the count applies NOT to the individual words as I'd have liked but EVERY word that has been searched for in the session.: Here's a snip-it
[Code]...
how to get the count to apply for each word individually. Either just within the session or, if possible, keep a constant running total of searched words.
iv been reading through all ur post about the database. but i have further queries regarding searching a record in database through visual basic 2008. iv used your 1st approach (Use T-SQL Select command to filter records) from this link [URL]
[Code]...
I finally can create a lowercase word like "wife" to uppercase. However, there is now an unseen problem. Instead of only Uppercasing the First Letter of the word like "Wife", it is UPPERCASING the entire word like "WIFE". How to only Uppercase the FIRST LETTER in the searched word?
View 7 RepliesIs there a better (shorter) method to retrieve the NeutralResourcesLanguageAttribute of an assembly than using reflection as implemented below?
Public Function GetNeutralResourcesLanguage() As String
Dim assembly = System.Reflection.Assembly.GetExecutingAssembly
Dim attributes = assembly.GetCustomAttributes(GetType(System.Resources.NeutralResourcesLanguageAttribute), False)
If attributes.Length <> 1 Then
[code]...
I am creating an application which will allow users to search parents names and display their childen respectively in a datagrid.I have created a form with two text boxes, a search button and a datagrid. The two text boxes are txtFName.text and txtLName.Text. On clicking btnSearch I want to be able to run a search to the SQL database for specific records.So far I have been sucessful in doing so with a listbox but I would prefer to have the data populating in a datagrid as it is more cleaner.
Here is the working code for displaying searched data in a listbox: Private Sub btnSearch_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSearch.Click
[Code]...
I used to run the following code on WIN XP PRO and it used to work. But why not running anymore on WIN 7:
Dim Log As New System.Diagnostics.EventLog()
Log.Source = "Demo Log"
Log.WriteEntry("Hello World", EventLogEntryType.Warning)
It gives the following error message: The source was not found, but some or all event logs could not be searched. Inaccessible logs: Security.Luai Alrantisi, BSc in Computer Engineering, University of Ottawa 2007, Canada. IT Manager of MTN Mobile Telecom.
My app is a Bible Reader. At load up I can choose Genesis Ch1 and its entirety pops into a rtb. I enter a word to search for like 'God' and hit the SEARCH button. The results I get are initially what I want. I get the verse 1:1 In the beginning God created the heaven and the earth. But then the app replaces the script with other words containing God, but all jumbled up. Here is the code I am using: Private Sub ToolStripButton2Search_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles ToolStripButton2Search.Click Dim stSearch As String stSearch = Me.ToolStripButton2Search.Text For Each Line As String In File.ReadAllLines(Path.Combine(Application.StartupPath, "Bible VersionsKJV 1611King James Version of the Holy Bible.txt")) If Line.Contains(Me.ToolStripTextBox1.Text) Then Me.RichTextBoxViewer.Text = (Line) End If Next LineBryn Ryver
View 2 RepliesI want to know if it is possible to perform a mySQL query to get a single record (searched for by ID) and then split each field into a seperate text box.I think im ok with the SQLQuery to get the record. its the splitting it into individual text boxes that im strugling with.
View 1 RepliesI'm new to visual basic 2010 ultimate. I want to make a search button to "search" ms access 2007 database for specific data and display the results in datagridview. I also want to display the data to textboxes.
View 1 RepliesIm trying to create a windows service with vb.net but when I run: InstallUtil.exe myservice.exe
I'm getting the following error in the MyService.InstallLog file: Restoring event log to previous state for source DebtorInvoiceMailingService.An exception occurred during the Rollback phase of the System.Diagnostics.EventLogInstaller installer. System. Security. SecurityException: The source was not found, but some or all event logs could not be searched.Inaccessible logs: Security.An exception occurred during the Rollback phase of the installation. This exception will be ignored and the rollback will continue. However,the machine might not fully
DebtorInvoiceMailingService.vb
Imports System.ServiceProcess
Imports System.Timers[code].....
I am using the below code to find all the items in a listbox using vb.net 2005. But how can remove the non searched items from the listbox after searching?
[Code]...
Can I do anything more or less with IDictionary? How do these two collections differ?
View 5 Repliesmy code is :
[Code]...
The error is Value of type '1-dimensional array of string' cannot be converted to 'String'.
I want the Function to accept List(Of String), Array & String and similarly return List(Of String), Array & String respectively. The Function simply adds a string (month) to the input collection. I just want to use it for string, array and list with needing to think of conversions.
[Code]...
Basically I have a webresponse stream:dim lol as string = readstream.tostring there is a lot of information within the string but only one link starting with http: located near the end of the string - however there is no constant character point where I can start... (i.e. 38)
I want to extract the link from the string i.e. dog cat plane car [URL]..that is approximately how it looks above - words and url substituted I want to just extract [URL]..I had an idea of parsing the string from http: to the end Then after that splitting the string up again to remove the }], however it does not return anything
I got an app, which receives data via a R232 port, convert it to a string and on the other side I got a database, where the strings are saved. How can I find a way to compare the string with all strings in one database column and get back the another stringform the same row in this database. I never programmed a database
View 1 RepliesI have buttons generated through code (dynamically). I have to associate an event (the same) to them. I use AddHandler button.click, AddressOf mysub.The issue is that mysub gets a string (mysub(string)), but AddressOf doesn't accept a parameter inside the routine. How can I do this? Using also an alternative to AddressOf.
EDIT:
Public Class Form1
...
Private Sub mysub(ByVal sender As Object, ByVal e As System.EventArgs, ByVal str As String)[code]......
These is the content of my txt file which is saved in D drive in my pc abc,1,2,3..I tried the flowing but it didn't work:[code]I am getting error on this line.. data = line.Split(","c)...it says this line isn't in use anymore or something and that I rather use LineInput but thats asks for filenumber and i don't know what that is. I am sorry but I am a complete beginner. what else can I try? [code]ok that error is gone now but now if I want to add these values to a list box..how can i do that?
View 1 RepliesWhat is the best way to pass the four (4) parameters after the applicationName to the application to be launched?
Process.Start ("C:\MyApp.exe",
"CommChannel1",
"DeviceName",
"Language",
"UserName")
I have the following web method:
<WebMethod()> _
<ScriptMethod(ResponseFormat:=ResponseFormat.Json, UseHttpGet:=True, XmlSerializeString:=True)> _
[Code].....
I wanted to use HttpGet here so that the result can be cached.
I tried every variation of calling this, but no luck. Is this possible with GET?
I have a field that I display via: String.Format({0:c},amount) This produces the string "$28.28" However, when I try to convert back to a decimal amount, I get an incorrect format exception: amount = Decimal.Parse(amount.Text, NumberStyles.Currency) I also tried it with NumberStyles.AllowCurrencySymbol with the same results. I verified that the value in amount.Text is "$28.28". Am I missing something? Shouldn't these two operations use the same currency symbol and formats?
View 2 RepliesI Ported this code from a code project article in c# called Nscript
heres the code
Base App
Imports System
Imports System.IO
Imports System.Resources
[code]....
Okay Now I only get two errors (I dont know how to solve them)
Error3Class 'BaseApp' must implement 'Sub OnCompilerError(errors() As CompilerError)' for interface 'IScriptManagerCallback'.
And
Error4Class 'ScriptManager' must implement 'Sub CompileAndExecuteFile(file As String, args() As String, callback As IScriptManagerCallback)' for interface 'IScriptManager'.
But What I would also Like to know (as well as how to fix the errors), is would the code work?
I need a regular expression that can validate that a string is an alphanumeric comma delimited string.
Examples:
123, 4A67, GGG, 767 would be valid.
12333, 78787&*, GH778 would be invalid
fghkjhfdg8797< would be invalid
This is what I have so far, but isn't quite right: ^(?=.*[a-zA-Z0-9][,]).*$
Problem: Your task is to take input from the user in string and give the following options to the user in a menu.
1- Find a String
2- Create sub-string
3- Erase a portion of a sting
4- Replace a word in the string
5- Count number of words and characters in the string without spaces.
6- Capitalize first character of each new sentence and convert the rest
of the characters to lower case.
7- Sort all the words in alphabetical order. (Use Bubble sort algorithm to perform sorting).
To perform all the above mentioned tasks you can only use pointers. Create a function to perform every task.
So strings are reference types right? My understanding is a reference to the string in the heap is passed even when you pass the string ByVal to a method.
String myTestValue = "NotModified";
TestMethod(myTestValue);
System.Diagnostics.Debug.Write(myTestValue); /* myTestValue = "NotModified" WTF? *[code].....
And what is going on under the hood? I would have bet my life that the value would have changed....
Im working on a program and I get this "Value of type '1-dimensional array of String' cannot be converted to 'String'." heres the code that gets this error:
[Code]...