Is it possible to get all of the text boxes from a Tab control ? I just want to perform an action for all of them (i.e. change their back color).I am using this following code , but it doesn't work.[code]I have also tried to catch the name of their parent control ,but to my surprise the value is Nothing ! It is like they are not placed on a parent control.I have also tried placing the text boxes on a Panel control and then the code works fine (replacing the Tab control's name with the Panel's name) . However I need to use a tab control because I need more than one tab in order to place my controls.Just in case , let me specify that the Tab control is already place on a Panel control .
Im working on a lay-away form application, this particular part is part of the even where the user adds a new customer, and has come to the section for adding personal references to the customers account. What Im trying to do is to check all the text boxes inside the GroupBox control, and then add all the tags of the text boxes that are empty to the list. If the list holds any records it will be put into a message box to let the user know he missed this value. But I want them to list in one text box. Here is what I've tried:[code...]
I get a conversion error, Cannot convert Prompt to String.
I am facing an important problem with the LineShape control (installed with the Visual Basic Power Pack) . The problem is that in design time once I have "Sent to back" some controls (other controls, like text boxes), I can no longer select them! The controls get stuck on the form and I can't select them anymore! Even if I select those controls from the Properties window, I still can't do anything with them (like move them over the form etc). Right now I am using VS 2008. However maybe this problems doesn't appear on VS 2010?
I am trying to follow the book 'Sams teach yourself VB 2008'. It was going well until the end of hour 4. For exercise 1 I have created the form with a button and two text boxes, but cannot work out the code I need to move text between the two boxes. The Object Browser does not seem to help - am I reading it wrong?
how to do something similar to what was a control array in VB6 in .NET? I would like to be able to fill the contents of several text boxes using a FOR NEXT loop or something similar..... corresponding the contents of an array with the texts of an equal number of text boxes.
I'm trying to lern VS 2010 from VB 6 and one of the things i'm hawing a problem whid is control array.In vb 6 if you create a text box it's named "Text1" and if you yust copy it and paste it it renames to "Text1(0)" and the new one's name is "Text1(0)" and the code would lock like this
[code]...
then it would print for each loop the random result in one of the text boxes corresponding to i.
Public Sub RandomNumbers() Dim s(4) As String Dim RandomNumber As Byte
I don't know if you can tell what I am trying to do here, so I will try to explain. I what to create for random numbers and place them into for different text boxes. I also would like to do this with combo boxes and their selected indexes. So if the combo box has 10 items in it; the new selected index would be the random number generated above.
I'm in the middle of creating an application that will be used to input customer information whilst the customer is speaking to someone over the phone. This involves the customer giving the employee information such as name, address, postcode etc and the employee inputting that information into text boxes and combo boxes that are in the application.
What I would like to be able to do is after the customers information is given over the phone, I need to be able to send that information to a database which will probably most likely be done by button click. In this case, I'm using Microsoft Access. I'm also hoping that I can do this within Visual Basic coding.
The database is set out with multiple tables which include a customer table and a ticket table and both have multiple fields such as first name, surname in the customers table. Both of these tables are in use with the information that the customer gives over the phone.
I've already asked on other forums and people are where replying giving me third party programs that I could use to implement this, something I don't really want to do.
I'm in the middle of creating an application that will be used to input customer information whilst the customer is speaking to someone over the phone. This involves the customer giving the employee information such as name, address, postcode etc and the employee inputting that information into text boxes and combo boxes that are in the application.
What I would like to be able to do is after the customers information is given over the phone, I need to be able to send that information to a database which will probably most likely be done by button click. In this case, I'm using Microsoft Access. I'm also hoping that I can do this within Visual Basic coding.The database is set out with multiple tables which include a customer table and a ticket table and both have multiple fields such as first name, surname in the customers table. Both of these tables are in use with the information that the customer gives over the phone.
Im trying to make a program that allows the user to view additional information via moving the cursor over the label to view (make visble) additional information, in the form of text boxes and/or picture boxes. How will i go about doing this?
how to move info from text boxes on one form to binding source text boxes on another form. I am displaying array info in text boxes on one form and i need to add them to the database on another form. How do I do that?
Just getting started in VB.NET. I would like to add X-number of text boxes at run time. And then be able to address them by their index or some sequential numerical value (like an array)
This is what I have so far:
CODE:
When I turn this into a loop to create multiple toolboxes, how do I assign a name to the controls, or will all of them be named "MyTextBox" ? I'll increment their position so thats no problem.
I've been writing a weight program for flooded pressure vessels and I'm having trouble retrieving the data from the text files I've been saving. I know how to write the data to the text file, but retrieving it with OpenFileDialog is not so easy for me.The user has individual text boxes that they input strings or numbers into and when they save the file, each text box input is written to one line in the text file. For example, the first text box is for the username, therefore the first line of text that is saved is the person's name, the second text box is the customer, thus the second line in the text file is the customer name, and so on.
(Actually, the first line of text in the saved file designates whether English units were used or Metric units because when the user retrieves the saved file, English units will open one form and Metric units will open a separate form, so some If...Then statement will need to occur).I need to be able to read the first line, have either my "EnglishForm"form open or my "MetricForm" form open, and then have each subsequent line of text be displayed in their corresponding text boxes. I know I need to use ReadLine or LineInput, but I don't have a clue what to do.Assuming the syntax I've displayed below would just magically work (if only life were that easy), it would look something like this
If FirstLineOfTextInFile = "English" Then EnglishForm.Show() ElseIf FirstLineOfTextInFile = "Metric" Then[code]....
And so on...I read a lot of articles from the MSDN library and exhausted each link that I've looked through from Google and Bing, but most only retrieve data from the file to a single text box through some loop or streamreader and don't take into account multiple forms.
i am trying to automatically generate multiple text boxes on a form with the following code
Private Sub CreateTB(ByVal x As Integer) Dim y As Integer = 1 Do Until y = x
[Code]...
i need it to generate as many text boxes as the variable x states, so i used the do until loop thing. But i am stuck when it comes to naming the text boxes because obviously all the text boxes cannot share the same name. so i would like to know how to programmatically name each textbox uniquely.
I want to split each line at the comma and write the left side to a textbox and the the right side to another textbox. I'm close, with the code below, but I can only post results from the first line in the file. How do I loop this and append the text results in each of the textboxes.
Dim TempFile As String TempFile = "temp.txt" Dim sw As StreamWriter
how to permanently save to text files then re-open all of the information again using SFD and OFD. Now my teacher has come back at me and said that i need to be able to save the information from multiple text boxes and have the text in certain labels to also be saved into the one text file (the labels need to be done because it is a database and these labels are like the fields and the right text box needs to match the right label)
I'm trying to make a small database out of text boxes and text files, something where sql would be overkill, not to mention beyond my experience. I want to be able to write the contents of the text boxes to a file.txt (the easy part) then being able to retrieve them back out into individual text boxes. How would I pull this one off?
I have a text file containing 10 pieces of information. I want to read the information from the text file and put it in text boxes on a form, so that the user can view the information and edit if required. What is the best way of approaching this?
I need to to able to save multiple text-boxes and a combo-box to a text file. the thing is, when I go to save, I check out the .txt file manually and its saved all in one line, no spaces. when I go to "read" it with the 2nd part (<-----this is a 2 part Challenge) it even reads all from that one line in the text file. What i'm asking is how can I make my text-boxes saved in the text file on different lines. [Code]
I have code to show I tried to do it on my own, to boot!
Private Sub OpenPetProfileToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles OpenPetProfileToolStripMenuItem.Click Dim AllText As String = "", LineOfText As String = ""
[Code].....
This save command works perfectly except for the lstshowresults, which I'm having issues getting to appear in the print line bit, but that's for another time.
I have a text file containing ten pieces of information (5 prices and 5 descriptions) I want to load the information from the text file in to the text boxes, so that it can be viewed and edited if required.
I've declared the filename, and various variables, but I'm not sure how to get the info from the file to my form?
filename = CurDir() & "/charges.txt"
Could I use something like this:
fileopen(1, filename, openmode.append) do while not EOF(1) ... ...
What i am trying to do is save text from a number of text boxes to a user named file then subsequently be able to reload the data back into the same text boxes at a later date.so far i have this which was provided for elsewhere on the web, this allows me to save comma delineated data to a file which is fine but i can't seem to reload the data. As an experiment i have just tried to reload it back into a rich text box to see if the process would work but nothing as yet.
Private Sub SAveToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles SAveToolStripMenuItem.Click Dim savedfile As String savedfile = TextBoxinc1.Text & "," & TextBoxinc2.Text & ","
I have Three text Boxes and i want to use Cut, copy, paste method.But the problem is when i copy one text box matter and then apply Paste option through menu control ,then matter is displayed all three text boxes.
I am using many text boxes in a form. How do i validate them, In certain text boxes I have to use only text and in some I have to use only numbers. Is using ASCII is a right method or is there any easier method to do this. If so please let me know the coding.
When I open a form in my application and I maximize it, the Icon and the ControlBox are merged in the menu of the MDI parent where I open the form in. That is perfectly normal.
But when I close that form and open an other and also maximize it, I get two icons and two control boxes in my menu. When I close that form and open an other again and maximize it on it's turn, I get 3 icons and 3 control boxes in my menu. When I close the maximized form shouldn't the icon and the controlboxes dissapear?