My application is in VS2008 coded in VB.Net I have a DatagridView.I have a Save Button on my Form.Now my requirement is i want to the Data that is populated in Datagridview when i click on Save button. I want to do it using Update Query.
below is my code.
CODE:
I want to update only the Fourth Column in Datagrid.
CODE:
Im getting an error in the Query as End Of Statement Expected.This is the first time transacting using DatagridView.
I have an object (ClassGPS) containing a DataTable that is exposed through the property "Satellites". My form has a bindingsource that, upon load, associates itself to a new ClassGPS object. The table has 5 columns, two of which ("PRN" and "dB") I want to chart using the new 4.0 chart tool. So the chart object's DataSource = ClassGPSBindingSource, and the DataMember = Satellites. That is all set in the designer.In ClassGPS.New(), the table is pre-loaded with 4 rows. This object is created before the form loads. When the form loads and the bindingsource is set to the created GPS object, the chart correctly updates and displays the four pre-loaded entries.On this form, I have a button that adds more entries. Tracing from the Click event, pushing the button does add the entries properly to the underlying table, and if I create a ListCHanged handler on the data source, the events are all correctly firing, but the Chart does not update to reflect the changes.
So to test, I added a Datagridview object. Just like the chart, I set its datasource to ClassGPSBindingSource, and the DataMember to Satellites. And here's where it gets weird. In the designer, the newly added DataGridView control has 4 columns in it labeled RowVersion, Row, IsNew, and IsEdit. I didn't create these columns, it does it itself. If I try to change the bindings on these columns to reflect the actual datatable names (PRN and dB) two things can happen:
1) If I hit Play (F5) to debug the program, the DataGridView looks and acts correctly inside the program and is correctly bound and updating fine as I add new data. In the designer underneath however, the changed columns have disappeared and are replaced with the original four it is creating for no apparent reason. When the debug session terminates, the columns - which just finished functioning fine in the debug session - are now gone.
2) If I hit Build, the designer destroys my columns immediately and recreates those it defaulted to.In either case, something very fishy is going on... in that the Chart, with the exact same binding settings as the datagridview, does not work but the datagridview works just fine (unless Build is hit prior to Run).Has anyone run across this? Can you reproduce it? I have bound a chart to a datatable before and it worked just fine, but it didn't have to update except when the form it was on was closed and later re-loaded.
I need to run a query when I add/Change a value in my first column in a datagridview. When I add a value (a identifier from a table) in my first column, then I need the query to retrive the rest of the values in the table recordset. When I try to run a query, all i get is a query that updates my whole datagridview, and not only one row, with this code in the CellValueChanged module of the datagridview:
Is there anyone who knows what I have to do, so I can add several rows to my datagridview, and let a query retrive my recordset based on my value in the first datagridview column?
I have a datagridview and i want it to display the results from a query. How would i go about doing this. Here is my code so far:
Dim searchStr As String = S_date_menuItem.Text.Remove(0, S_date_menuItem.Text.IndexOf("'") + 1) searchStr = searchStr.TrimEnd("'") adapter = New OleDb.OleDbDataAdapter("select * from account where Date= @Date", acctconstr) adapter.SelectCommand.Parameters.AddWithValue("@Date", searchStr)
that is my query but i don't know how to get my datagrid to display the results.
i have six textboxes from which the user can query the database. Now the user can decide to fill all the fields and query this i have done using AND OR in the sql syntax but the problem is when he decides to leave some blank my program is throwing an exception how can i skip the blank fields and only execute the WHERE clause for the filled boxes.
It is returning all the columns by id. I need only the primary key. When I add the following line it is empty: WHERE SIK.indid = 1 Why is that? Is there other ways to do the same thing and working? Since I am in the rush
I'm trying to figure out how to get a query for multiple columns in my dataviewgrid.. So far i havn't even been able to make a single column query work, when i search something in First_Name for example, it returns nothing. ive used query builer, ive written the code myself, nothing seems to work.
The following data is created by joining two sql tables together:I would like to group together distinct rows of DateStamp/UserName/ StudentName/ InstructorName/TableName/PrimaryKey (I'll call this 'group records') and then group under these ColumnName/PreviousValue/NewValue (I'll call this 'subgroup records')The end result would be that I could iterate through the 'group records' - there would be 5. In each 'group record', I could then iterate through the 'subgroup records'. The 5 groups would contain 3, 2, 5, 2 and 1 subgroup records respectively.What would be the syntax to create a query to do this? Ideally this would be in a vb.net linq syntax.
i populate a datatable from a join query.i have one table called GameSheetTx which has 5 bit columns for days monday to friday.now when I want to create a new GameSheet I cant join to GameSheetTx as there will be no records for the Parent GameSheet. I still want 5 columns in my datatable for day1 to day5.how can i change this query to show 5 bt columns: [code] also how can i set the rowstate to datarow.Added for all rows in the datatable.
I'm using the following update method.. I'd like to be able to update the value of a checkbox into the existing query if possible. how to do this the correct way?
Public Shared Function SaveMemo() As String Dim sConnectionString As String = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C:Documents and Settingsdiw07My DocumentsDaily Backupsphone memo backend.mdb"
Dim qry As <??> = From f In dirInfo.GetFiles("*.QBW") Select File = f.FullName, Include = True Dim dt As DataTable = qry.CopyToDataTable()
I tried as "IEnumerable(Of DataRow)" but that didn't work. At runtime it said:
Unable to cast object of type 'WhereSelectArrayIterator2[System.IO.FileInfo,VB$AnonymousType_02[System.String,System.Boolean]]' to type 'System.Collections.Generic.IEnumerable`1[System.Data.DataRow]'.
Each row represents a group of Lorem value and the number of each possible IpsumID in the group. New rows can be added to the IpsumTypes table, rows can be deleted too, so I need dynamically generated columns, because at the time of writing the code I'm not aware of the possible values of Ipsum. How can I achieve this? Is there a magical Linq query which solves this problem, or should I get the values from the database and parse them separately, if speed counts?
How to JOIN tables on nullable columns? I have following LINQ-query, RMA.fiCharge can be NULL: Dim query = From charge In Services.dsERP.ERP_Charge _ Join rma In Services.dsRMA.RMA _ On charge.idCharge Equals rma.fiCharge _ Where rma.IMEI = imei Select charge.idCharge
I get a "Conversion from type 'DBNull' to type 'Integer' is not valid" in query.ToArray(): Dim filter = _ String.Format(Services.dsERP.ERP_Charge.idChargeColumn.ColumnName & " IN({0})", String.Join(",", query.ToArray)) So I could append a WHERE RMA.fiCharge IS NOT NULL in the query. But how to do that in LINQ or is there another option?
The problem was that the DataSet does not support Nullable-Types but generates an InvalidCastException if you query any NULL-Values on an integer-column. The modified LINQ-query from dahlbyk works with little modification. The DataSet generates a boolean-property for every column with AllowDbNull=True, in this case IsfiChargeNull.
Dim query = From charge In Services.dsERP.ERP_Charge _ Join rma In (From rma In Services.dsRMA.RMA _ Where Not rma.IsfiChargeNull Select rma) On charge.idCharge Equals rma.fiCharge _ Where rma.IMEI = imei Select charge.idCharge
How to update columns in datatable using linq without conditions. I have an idea that I'm just gonna loop all the data in the datatable but don't know what comes in LINQ.
below code gives me an exception telling me that it is an invalid column name. It's taking the input string from "frmMain.txtBadge.Text" and thinking it's the column name. I havesearched for days without any clue.
Below code is supposed to update a table in oracle with rows imported. But it seems to update all columns in the table with only the first column which is imported from the CSV file. I figure its the "ReadFields" property which needs to manipulated/changed.
I have been on a database project for a while now. I wanted to be able to make changes to my database using the update command of a Datagridview control.However, I have been faced with a series of unsuccessful outcomes.I want to do this how do I go about it?
I'd like to take all suggestion either in C# or VB.NET.I have a DB diagram like the image below. I also include the database script here [URL]In the Students table, CountryId and RoomId column are allowed null. Because some records do not have info about room and country yet.Also, some students do not have essays.I'm doing a joint query with all tables. I want to select all students to project the result like this:Wanted query result.
Here's my current query that gives the result like the image below:
Dim db As New DBDataContext Dim query = From st In db.Students _ Join c In db.Countries On c.Id Equals st.Id _ Join r In db.Rooms On r.Id Equals st.RoomId _
[code].....
current query result I got only one result back because I have (2) William NoMan record in every table. But I don't get anything about others, like (3) Sync Master who has everything but RoomId.What do I need to modify the query above so it will give me all students like in the wanted query image above?
I have 2 datagridviews on different tabs of a tabcontrol.The user can input names into datagridview1 column1.I want these names to automatically appear in datagridview2 column1, in such a way that when rows in datagridview1 are added and removed the same rows are added and removed in datagridview2.I also want the column sort function to effect datagridview2.
Please can you translate the above line of C# into VB.NET?At runtime, I'm trying to update an existing GridView column, as opposed to adding new columns, just before a DataBind()
How can i do a workaround for this? I two databases(.sdf). Database A has table A1 Database B has table A2 Table A1 is an exact duplicate of A2 minus 3 columns My dataset(.xsd) is based off of tableA2 in Database B. I can fill all my tableadapters in Database A and all info in table A1 using the dataset. My problem lies when I do TableAdapter.Update() for Table A1(Since the dataset has the 3 missing fields) it tries to update table A1 with info that isn't there and I get an error. How can I update table A1 and ignore the 3 missing columns using the single dataset? Or is TableAdapter.Update() designed to Update the Database with all columns found in the dataset ?
Objective to clear the datagrid view after updating. This should happen when the user clicks the OK button when the update is confirmed. Below is what i have.I currently have
Private Sub SaveToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles SaveToolStripMenuItem.Click 'This updates datsource Try
is there an easy way to make the size of a datagridview expand dynamically (like say it is not long enough to display all the data it will grow in width), or do i have to implement this functionality manually?
