I am experiencing some trouble with the autogenerated initializecomponent function. Visual Studio insists on initializing a variable like the following, when I drag a usercontrol onto a form:
Dim HierarchyTreeNode1 As NewDelfiLib.HierarchyTreeNode = CType(New System.Windows.Forms.TreeNode(""), ND.HierarchyTreeNode)
Got a question regarding declaring a variable. Basically I have a module that writes to a text file using textwriter which is declared for the whole module to use at the top of the code. But what I want to do is clear the contents of the text file when the program is executed (using file.writealltext). The problem I have is that the file is obviously already in use as a result of the textwriter and the file cannot be modified because of this.
My question is: is there any way of declaring the textWriter object later on (not during the initial initialization of the module) without passing the object between functions? Setting the variable as inactive or something along those lines during initialization would be ideal.
I have created a project in VB.net and its working fine in my machine.But when I provide the exe to my senior to test it shows the initialization error.I came to know the reason that the error is because the microsoft .net framework is not updated in my seniors machine....So there can be a possibility that the framework might not be updated on the client's machine as well.... when the user clicks on the exe file it should check that the microsoft framework is present and updated if not then the exe file should first prompt the user that the microsoft framework is needed and should be updated and start the installation....
View 10 RepliesWhen I want to run several programs out of visual studio IDE the program couldn't be run and this message appear for me and say ("Unable to find a version of the runtime to to run this application")I am using visual studio 2005 .net My program is made by basic language.What am i do to fix this error??
View 2 Replieson installing a application which was packaged through inno setup on a windows xp machine X84
i am getting error as .net intialization error
what i made was while on try i had uninstalled the .net framework 2.0,3.0 and 3.5 and 4.0 and reinstalled frame work 3.5 and 4.0 + restarted the system and also i have tried to repair the frame work installation
but no good results
My nightmare had been back again ".NET Framework Initialization Error "I make a program in basic language but when I want to run the program out of visual studio IDE this Error appears for me : the title : " .NET Framework Initialization Error" the body : "Unable to find a version of the runtime to run this application."
View 2 RepliesI am getting "Initialization of the dynamic link library c:WINNTsystem32COMCTL32.dll failed. The process is terminating abnormally" when I tried to install a vb package in Windows NT.
View 2 RepliesI am getting the error:"Range variable 'sender' hides a variable in an enclosing block or a range variable previously defined in the query expression."for this
Imports System.Data.SqlClient
Imports System.Linq
Public Class Form1
[code]....
I can select any other item from the table without the error. "sender" has the same properties as "receiver" in the SQL table.
I receive the error -
[Code]...
I'm converting a VB6 forms application to operate in VB2010. When initialising the form using VB2010 I've made use of the New() event with a call to InitializeComponent(), as suggested by the VB2010 Express debug facility. However, when InitializeComponent() is invoked I've noticed that the system runs the TextChanged events for some, but not all, of the components in the form.Can anyone explain what the InitializeComponent() call actually does? and why certain form events are executed whilst others are not?
View 2 RepliesI have some conditionals in my InitializeComponent which affect the layout based on some variables. Unfortunately, it seems like whenever I rebuild my application, this code is reverted back to its previous state. Is this code being regenerated based on the Designer interface? Is there a way to prevent it from doing this?
View 2 RepliesBeen getting this error with my program. Using framework 2.0
[Code]...
I'm trying to enter automatically todays date in a number of records in the Table 'Applications' into the field 'Date_refund_request'.
However it is giving me the error 'object variable or withblock variable not set' in the line "Set rs = db.OpenRecordset(strSQL, dbOpenDynaset)".
The code is as follows:
Private Sub Command16_Click()
On Error GoTo Err_Command16_Click
Dim db As DAO.Database
[Code].....
I updated one reference in my project and all of the sudden, every time I run my app I get the following error:
Error Stack Trace
The details of where this error occurred are as follows:
Source: frmMyForm.designer.vb
[code].....
I'm writing in ASP.NET 4 / VB.NET. I am querying an MSSQL database and sometimes have records come back with no results...so I enclosed the call I was making upon the results in an If..Else clause to set a default value if the database comes back with no results...but now I am getting this "Object variable or With block variable not set error". Here is the relevant code:
Dim clcfirst
Dim rhcfirst
Dim clcdate As Date
Code].....
I am populating combo box from database. In debug i can see that the combo box has been populated . here is the code
[Code]...
I need to add some code to the EndInit method of a PictureBox control but unfortunately its private and, from what I can gather, I can't shadow it and call base - at least not in VB.Net.What I can do is add a dummy property to my picture box class. The type of the dummy property is simply a class that just implements ISupportInitialize. However, that doesn't work, I need the dummy class to inherit from Control.Is that the minimum requirement?
View 1 RepliesI have a windows form and I created couple user controls, these UserControls are added on the form dynamically, everything works normally,
Just wondering where I should put the coding, should it be inside Form Load Event or after InitializeComponent() call?
Alright so i have a form with alot (ALOT) of controls...many tabs, many listviews, many comboboxes and textboxes, all of which have values which i saveload using a class i made for saving and loading these values from a file.
Loading these values is pretty slow after the form loads. Takes around 3 seconds (i had to create a splashscreen and made it look decent, but it's still not a nice thing to have)
Then today i decided to try something. I opened the designer to initialize component, and i called the LoaderSub (that loads the values for the controls from a file) within initialize component, in a location after all the properties are set but before all the .resumelayout and .performlayout are called. Lo' and behold the form loaded in less than half a second, with the values and all.
However, now everytime i make a change to the form in design view, or even add a handler to some control in code view, the designer redraws and the auto generated code takes out my code from initializecomponent.
I did the googling, and all the results i found for similar cases issues were cases where the person asking the question im going to ask, the answer is "Didn't you read the part that says DO NOT MODIFY?"
Still, as a last attempt, I ask here: is there any way to modify initializecomponent without losing my changes? I just need to call LoaderSub before the layout resumes...if i call it before initialize component, i get null reference exceptions. And if i call it right after initialize component, loading is very slow.
In C# Windows Forms, a user control's InitializeComponent is called from the form's/control's constructor. When I create same scenario in VB.NET I don't get a constructor, and I can't locate a place where InitializeComponent is called.I need to call my code between InitializeComponent and when the control's Load event is raised, preferably still in the control's constructor. How do I do this in VB.NET?
View 2 RepliesThe code generator creates code with references to a component I am using, before it's dependent components (datasets) are initalized. Although I can correct this by editing the form.designer.vb file, everytime I make a change on the form the code is re-generated in the wrong order. Where does VS2008 store information about the order of the components for code generation.
This Runs:
'
'AppointmentBindingSource
'
Me.AppointmentBindingSource.DataMember = "appointment"
[Code].....
I have made changes to the windows form name from "form1" to "applicant_name" after that it shows this error The designer cannot process the code at line 249: Me.name = "applicant_name" The code within the method 'InitializeComponent' is generated by the designer and should not be manually modified. Please remove any changes and try opening the designer again.when i comment it its started working fine can any one suggest me wat to do and why it is comming
View 3 RepliesI add a mainmenu I have to edit InitializeComponent().I tried to take a shortcut and copy an existing menu and then rename it. Big mistake. If you have done it, do not do it again.Anyone have an idea of how to get me back on track? I have done a rebuild, closed VB etc.
'frmMain
Me.AutoScaleDimensions = New System.Drawing.SizeF(8.0!, 16.0!)
Me.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font[code]....
My coding, I got error: Error Handles clause requires a WithEvents variable defined in the containing type or one of its base types.
For information i am using visual studio 2005. Here i highlight my probleam with in my coding
Public Class Admin
Private Sub TextBox6_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs)
End Sub
[CODE]...
To create splash screen before InitializeComponent, the WithEvents statement for the BackgroundWorker component needs to be moved from the Form's Designer.vb file into the constructor as indicated in the first commented lines of the constructor below.
[Code]...
I am trying to write a VB .NET (2008) DLL. When the DLL loads, I would like to perform an initialization task. Trouble is, I don't know how to do this. If I were writing this in C++, I would put the necessary code in DllMain, and all would be well. Is there any similar mechanism to DllMain in VB .NET? Or is there another way to do this?
View 4 RepliesI need to do a dynamically loaded Header and Footer on Master page where there are two placeholders to store the users controls which will become the Headers and Footers. The reason why I am doing it to make it more customizable and it is the how it is required from my supervisor as well.So I have two key-value in web.config such as <add key="MasterHeader" key="~/Controls/Header.ascx"/> <add key=" Master Footer" key="~/Controls/Footer.ascx"/>So I am wondering which Page event should I load these users controls by saying
[code]...
Where is the best Page event to put the codes above?Do I need to put something in the page directive to make it work?
Is there a way to add comments to an array initialization? For example:
Dim test As UShort() = { _
1, _
2, _
3, _
4 _
}
I'd like to add a comment on each line, but the obvious syntaxes fail (for obvious reasons)
1, 'test _
1 'test, _
So, am I out of luck?
i want to create an anonymous class in vb.net exactly like this:
[Code]...
I am unable to initialize textbox and combobox in my form when i click on the binding navigator 'New' button. Why is it so? But at the same time the datetimepicker does!ere's the code:
Private Sub BindingNavigatorAddNewItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles BindingNavigatorAddNewItem.Click
Me.CreatedbyTextBox.Text = Master.user
[code].....