When I want to run several programs out of visual studio IDE the program couldn't be run and this message appear for me and say ("Unable to find a version of the runtime to to run this application")I am using visual studio 2005 .net My program is made by basic language.What am i do to fix this error??
View 2 Replieson installing a application which was packaged through inno setup on a windows xp machine X84
i am getting error as .net intialization error
what i made was while on try i had uninstalled the .net framework 2.0,3.0 and 3.5 and 4.0 and reinstalled frame work 3.5 and 4.0 + restarted the system and also i have tried to repair the frame work installation
but no good results
I was sent here by someone else that said someone here might.Below. is the message I get every time I reboot. I am not sure if it's a .NetFrame Work 1.0 or 1.1 error or not. It may be Visual Basic as I really don't know. Also, may be where I uninstalled some program or another the wrong way, by just deleting the folder instead of using the add and remove programs. I did have 1 program uninstall in-correctly by Revo Pro Uninstaller also about the time I started getting this error. But, I do know in the header error box it does say ".NetFrame Work" though... I just adding these suggestion as it might help you know what the problem might be. I have XP Home 2002 with Service Pack 3 installed. I have repaired the .Net FrameWork 2.0, 3.0 , 3.5 and 4.0. I couldn't repair the 1.0 or the 1.1 as I have deleted my temp folders that must have had something the installer needed in them. I tried to repair them with the "Installer" located in the "Installer" folder but it ask for some file in the temp directory that I did not have so I had to cancel the repair.
[Code]...
(1) how to know which version of .net framework i am using for my application
(2) is it possible to force my application to use .net frame work of any specific version only
I have created a project in VB.net and its working fine in my machine.But when I provide the exe to my senior to test it shows the initialization error.I came to know the reason that the error is because the microsoft .net framework is not updated in my seniors machine....So there can be a possibility that the framework might not be updated on the client's machine as well.... when the user clicks on the exe file it should check that the microsoft framework is present and updated if not then the exe file should first prompt the user that the microsoft framework is needed and should be updated and start the installation....
View 10 RepliesI am experiencing some trouble with the autogenerated initializecomponent function. Visual Studio insists on initializing a variable like the following, when I drag a usercontrol onto a form:
Dim HierarchyTreeNode1 As NewDelfiLib.HierarchyTreeNode = CType(New System.Windows.Forms.TreeNode(""), ND.HierarchyTreeNode)
My nightmare had been back again ".NET Framework Initialization Error "I make a program in basic language but when I want to run the program out of visual studio IDE this Error appears for me : the title : " .NET Framework Initialization Error" the body : "Unable to find a version of the runtime to run this application."
View 2 RepliesI am getting "Initialization of the dynamic link library c:WINNTsystem32COMCTL32.dll failed. The process is terminating abnormally" when I tried to install a vb package in Windows NT.
View 2 Replies[Code]...
I can access a specific frame and put the frame into a bitmap so that I can process the bitmap.
I have just a form in my VB.Net project and even when I try debugging that - there is nothing going on besides the form being loaded - I get the error: No symbols are loaded for any call stack frame. The source code cannot be displayed.
View 3 RepliesUsing MS Visual Studio 2010 Express, when trying to debug, the build finishes and the following error below appears. It doesn't seem to effect the running of the program.
The error is:
An exception was encountered while constructing the content of this frame. This information is also logged by running the application with the /log parameter on the command line, which stores results in "C:Documents and SettingsCorkyApplication
DataMicrosoftVBExpress10.0ActivityLog.xml".
Exception details:
System.Runtime.InteropServices.COMException (0x80040154): Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG))[code].....
I can't find the "ActivityLog.xml" file the message references.
how does this function works. How does it copy the frame? HDC BiBlt???
ublic Function copyFrame(ByVal src As PictureBox, ByVal rect As RectangleF) As Bitmap
If isRunning Then
Dim srcPic As Graphics = src.CreateGraphics[code].....
the above function is called from the below command which is in a timer event. mycam is a class including the copy frame function.
bm2 = myCam.copyFrame(PictureBox1, New RectangleF(0, 0, PictureBox1.Width, PictureBox1.Height))
I'm using vb2008 with DB MSA2007 (save it to MSA2003) on Seven(7)System After I create my project I build it(make exe). then I took the file of project (application) and the DB from Debug Folder.
I tried to run this application with DB on another computer it's system is seven and MSA2007 and work very well. then I run it on pc it's system XP and MSA2003. it showed this error
Application Error THE APPLICATION FAILED TO INTIALIZE PROPERLY (0XC000135). Click on OK to terminate the application
I am trying to write a VB .NET (2008) DLL. When the DLL loads, I would like to perform an initialization task. Trouble is, I don't know how to do this. If I were writing this in C++, I would put the necessary code in DllMain, and all would be well. Is there any similar mechanism to DllMain in VB .NET? Or is there another way to do this?
View 4 RepliesI need to do a dynamically loaded Header and Footer on Master page where there are two placeholders to store the users controls which will become the Headers and Footers. The reason why I am doing it to make it more customizable and it is the how it is required from my supervisor as well.So I have two key-value in web.config such as <add key="MasterHeader" key="~/Controls/Header.ascx"/> <add key=" Master Footer" key="~/Controls/Footer.ascx"/>So I am wondering which Page event should I load these users controls by saying
[code]...
Where is the best Page event to put the codes above?Do I need to put something in the page directive to make it work?
Is there a way to add comments to an array initialization? For example:
Dim test As UShort() = { _
1, _
2, _
3, _
4 _
}
I'd like to add a comment on each line, but the obvious syntaxes fail (for obvious reasons)
1, 'test _
1 'test, _
So, am I out of luck?
i want to create an anonymous class in vb.net exactly like this:
[Code]...
I am unable to initialize textbox and combobox in my form when i click on the binding navigator 'New' button. Why is it so? But at the same time the datetimepicker does!ere's the code:
Private Sub BindingNavigatorAddNewItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles BindingNavigatorAddNewItem.Click
Me.CreatedbyTextBox.Text = Master.user
[code].....
I create a form2.vb which have a report viewr and modifier set to public. In reportviewer properties i add the Report1.rdlc Now i want to pass the vlue in the textbox at report1.rdlc i use following steps and code to do it butnot sucessful yet i need ur guidelines first from menu click report ___ report parameter and set the parameter name like conparm. Then i frm2 load event i write following
[Code]...
I am Visual Foxpro Programmer and moved to Vb.Net.
In Foxpro for each control I add to the form, there is a method called Init where this is executed only once when the form run.
I am doing the code for a control in the Form_Load and things working fine.
I am Visual Foxpro Programmer and moved to Vb.Net. In Foxpro for each control I add to the form, there is a method called Init where this is executed only once when the form run.
View 2 Replieswhy is this code not working?
Dim tcplistener As New System.Net.Sockets.TcpListener
This does not compile with the error "Overload resolution failed because no accessible 'New' accepts this number of arguments." The thing is, I have to declare it as New because otherwise I will get a null-reference exception...
I'm new to VB and my question is whether all elements of an array will be initially zero per default:
Dim myArray( nx, ny ) As Single (all elements zero ?)
or do i have to loop over the array and set all elements to zero?
(p.s. my background is in Fortran where the standard does not guarantee that all elements will be zero initially and one has to set all elements to zero explicitly if one desires a zero-initialized array. )
I'm looking for a list numeric type initalization identifiers for both C# and VB.Net.[code]
View 3 RepliesI am using visual studio 2008 and i can't seem to rectify this error..it seems simple but i really can't seem to rectify this.What iam trying to do is pass the values of an initialized string array to an uninitialized string array using a loop..here's my code:-
Document ^doc = gcnew Document("Abdul.doc");
String ^yes = doc->GetText();
array<Char>^chars = {' '};
array<String^>^splitx = yes->Split(chars);
[code]....
Whats the difference between these two initialization methods for obj? I've seen both of these, but know know if there is an appropriate time to use one vs the other. I found this post which covers C#, but not sure if the same applies to VB.Net.[code]
View 3 RepliesI'm wondering if you know if there is a better way to write this code in order to speed it up. It has several blocks of if statements filling arrays, like this:
row0: If x < b(1, 1) Then a1(i, j + 1) = 0
If x > b(1, 1) And x < b(1, 2) Then a1(i, j + 1) = 30
If x > b(1, 2) And x < b(1, 3) Then a1(i, j + 1) = 60
[code].....
i have a problem, from some reason i'm getting an error when "i" and "i+6" value within the str i = 1 To str.Length If i Mod 79 = 0 Then Dim c As Integer = str.Substring(i, i + 6) If c = "" Then str = str.Insert(i, "b") End If End If Next i
View 27 RepliesI am making a sort Server. But now the problem is that I am going to make a textbox that can make commands like 'ipconfig' in Cmd, but not that command. Its for starting server stopping server and such.
I tried:
if Textbox1.Text = ".serverStart" Then
'Do Stuff here'
End if
But that didn't work?
When starting my application, I have a couple of classes which are required to read certain files in order to create a set of default data. The logical place (to me) to do this is in a Shared class constructor; the idea would be to throw a class-level event if the reading of the defaults file fails. Unfortunately, this does not work as attempting to access such an event, in order to attach a handler to it, fires the class constructor before the event has been attached. In a failing case, the constructor starts, fires the fail event, the constructor completes, and then the event handler is attached, after the event has fired.
The only other solution I can think of is to give the class a "typeInitialisedSuccessfully" boolean property and put a try/catch block around every call to construct an instance of the class, which seems unnecessarily kludgey to me. Can someone suggest a more elegant solution?
EDIT: Because this is a fundamental Class, used in one form or another across nearly all of our software tools, I would greatly prefer a solution that will notify future programmers that the type initialiser needs to be called, which is why I initially went towards the Shared Constructor as a solution.