IDE :: Open Files Not Reloaded / VB2010
Feb 23, 2010When I reload a project the last opened files are not reopened. Is there a option I have to set? This always worked until today. I have reset all settings, no change.
View 2 Replies
ADVERTISEMENT
Retaining The Checkedstate Of A Listbox Even After The Form Is Reloaded
Sep 28, 2010I am populating a Checkedlistbox "lstExpert" from table "TableA" succesfully. Whenever an item is checked in the Checkedlistbox "lstExpert", i am saving it into another table "GroupExpert".
[code...]
Is it the right way to do by comparing index in Checkedlistbox "lstExpert" and "Listbox1" Is there a way to bind it directly to the table "GroupExpert" meaning if the value of the Checkedlistbox "lstExpert" is present in the "GroupExpert" then the item will be cheked... I tried the following code and nothing seems to work.[code...]
Cannot Open Edmx Xml In Vb2010 Express?
Jan 29, 2011I am starting programming entity framework by julie lerman. all her examples are in c#, which i do not use. when i right click on the edmx model in solution explorer (vb2010 express), i do not get an 'open with' option, only 'open' which italready is, in design mode.
View 2 RepliesOpen MS Word And MS Excel In VB2010?
Aug 5, 2010how to open MS Word and MS Excel in VB2010?
An can you give any site for referrence.
IDE :: Open A Program Written VS 2008 In VB2010 And Get Security Error
Sep 6, 2009After upgrading code to VS2010, the error "MSB3134: The permission set requested by the application exceeded the permissions allowed by the Internet or Intranet zones. Select Full Trust or to continue using partial trust, define your custom permission set in the Security Page of the Project Designer. Bentley Software Loader". The same code ran fine in VS 2008
View 3 RepliesConverting VB5 To VB2010 - Random Access Files?
Jul 27, 2011I am trying to convert a VB5 program to VB2010 so that I can continue to support it on my new PC. My copy of VB5 was an upgrade from VB3 which was an upgrade from VB2 which came on floppies, so I can't just install every preceding version as my new PC doesn't have a floppy drive.I have accepted that I will have to design all the forms from scratch (whatever happened to twips?) and will have to go through the thousands of lines of code line-by-line, but I have hit a brick wall when it comes to random access files. One such file is defined in the Declarations section of Module1 thus:[code]....
I soon found I had to change Type to Structure, but then in the declaration of transrec, transtype acquired a wavy blue underline with the error message: "'transrec' cannot expose type 'transtype' in namespace 'Treasurer_2010' through module 'Module1'.So if I can't use the structure in the module in which it is declared, where can I use it?
Vb2010 - When Debug The Program Error Says ExecuteReader Requires An Open And Available Connection
Aug 2, 2011I have o problem on my codes sqldr = sqlcmd.ExecuteReader when i debug the program error says ExecuteReader requires an open and available Connection. The connection's current state is closed. i dont know what its means that error..
View 1 RepliesVb2010 And Access Database Error In Program Files?
Nov 5, 2011I finished my application whith vb2010, this application uses a Access database. I have a problem because when I install my application he put database in de same path "program files" and this path is only read And my application crahed. I know how to installer put database in other path but I don't know how to tell my application to find this database,
View 4 RepliesWmplib And Vb2010 Express How Get Duration Play Time Mp3 Files Using Fileopen Only
May 2, 2011I am using wmplib and i like to know a duration time of a lot of files onto a same folder (software for audiobook for low vision persons)
View 2 RepliesVB2010: Resource Files Are Being Marked In The Error List As Not Valid Win32 Apps
Feb 6, 2010I have an application that is primarily developed on an x86 machine. I recently checked the app out of TFS onto a Win 7 x64 machine for development. However, every single form level resource file shows up in the error list with an entry like the following:
is not a valid Win32 application. (Exception from HRESULT: 0x800700C1) Line 127, position 5. C:Users...shortened...FormsfrmCustomer.resx Line 127 Column 5
What I find interesting is that my application level resource files aren't showing the same error. Plus, these are just XML files. They aren't applications in any way.
I'm currently working under VB2010 beta 2 on both machines. Obviously, with a bunch of errors, the app won't compile on the x64 machine.
File I/O And Registry :: Progress Bar And Open File Dialog VB2010?
Jun 7, 2011code snippet that would allow a progress bar to track the input of a text file? Normally I would not bother with this, but the text files are > 10,000 lines long, which is noticable even on a fast machine. The number of lines is variable, so I would assume that one would not use a fixed value to calculate when the progress bar goes 100%.
View 4 RepliesHow To Open Multiple Files Using "open With" Command Line Arguments
May 15, 2012I have an application that can read certain types of files, and I have it working so that if you do "open with" from windows, it automatically starts the application and opens the selected file.
Unfortnately, I cannot get it to work for more than one file.
System.Environment.GetCommandLineArgs() contrains the following:
System.Environment.GetCommandLineArgs(0) = name and path to the .exe
System.Environment.GetCommandLineArgs(1) = name and path to the first file selected to be opened
System.Environment.GetCommandLineArgs().Length is 2 when the user tries to open 1 file, which makes sense since the first argument is the .exe itself and the 2nd is the path to the file, but it does not increase to 3 if the user tries to open 2 files... meaning that System.Environment.GetCommandLineArgs(2) is never populated Here is some sample code that shows the problem: It will recognize no files or 1 file being opened, but if you try to open multiple it will only show the first.
[Code]...
VB2010 Use An Application To Package All Files Together Into A Setup Package
Feb 26, 2011I am wanting to use an application to package all my files together into a setup package. I have tried InstallShield 2011, but when i click on Visual Basic .net wizard, it tells me I do not have Visual Studio.NET installed on my system. I am currently using VB2010 Express How can I fix this... or is there a better application available for packaging?
View 2 RepliesSave File Extensions - Save/open Dialog Wont Show .GDL Files Unless Select "all Files"?
Mar 22, 2011im used to C programming.
Private Sub SaveAsToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles SaveAsToolStripMenuItem.Click
timedate.Stop()[code]......
The problem is that if I save a file I get "myfile.GDL" if I overwrite that I get a new file "myfile.GDL.GDL" ect.the other problem being that the filtering in the windows save/open dialog wont show .GDL files unless I select "all files".
How To Open Exe Files
Oct 18, 2010How do i open exe files with in my form with a command button
View 4 RepliesHow To Open PDF Files
Jan 15, 2010My project is a PDF file format database. How can I view these PDF files in VB.net? And what database should I use to store these PDF Files?
View 1 RepliesIDE :: Open VB .vbp Files?
Jun 4, 2010How do I open Visual Basic .vbp files?
View 1 RepliesOpen Many Files As You Go Or All At Once?
Jan 8, 2011I have many container files on a hard drive, inside of them are many images. I have to get a particular image by using an ID to do this I have to go trough each of the container files and find the one which has the ID in it then I can retrieve the image.
I think I have 3 options:
load all the images at start up into memory, some images may or may not be used. as I need each image go through all the container files and open the image into memory. create a dictionary of IDs and what file they are in at start up and then get each image as I need it without have to go through all the container files.
Open SKP Files In .net?
Jun 9, 2011I'm working on a piece of software using vb.net that should allow the user to open sketch up files '.skp' and perform some measure on it.how to get vb.net to open SKP files?
View 2 RepliesOpen Two Files At Once?
May 29, 2009Can I have two files open at the same time to write text into, in VB .net?[code]...
View 1 RepliesCan't Open Files In VB Project
Nov 6, 2009I am using Visual Studio 2008 Professional Edition, and I have a large windows forms project I have been working on. My computer froze up and I had to reboot. After reboot I opened my project, all the files loaded although I got a message telling me that the document load was skipped because of the way the project opened the last time. I am able to debug and run the program so the app is ok. but when I double click on a form to open it nothing happens. Even if i right click it and select "View Designer" or "View Code" nothing happens. No errors just nothing. I was able to open other projects with no problem but not this one, and this project is the only one that matters.
View 6 RepliesCan't Open Project Files
Sep 2, 2009There was an error about VB 2008 not being able to open vb files, i fixed that by re-installing but now when i try and make a project or open one i get this error:Warning1Extensibility DTE object unavailable.00
View 6 RepliesCannot Open Flash Files From Win App (EXE)
Jun 21, 2010I have created a small application to open the Flash File from my VB.Net Windows Application. To open the Flash file - I have used the Shockwave Flash Object. When I run the application directly from the Solution, the flash files are opening perfectly. But, once I created the EXE and tried to open the same file, I could not. But I can still open other files such as XML, PDF, and Word file from the same directory.
View 2 RepliesExe Program Will Not Open .Txt Files?
Jan 18, 2009Ok first i want to say im sorry if i put this inthe wrong section i have no idea what the thing im doing is called "I call it a notepad" Ok i made a notepad saved it ect now i got the .exe file i tryed making that my default notepad but when i click on a .txt file i get an error massage
C:Documentsand SettingsUserDesktopTry.txt is not a valid Win32 application
i dont get the point in making a program and not using it..The Notepad is only a simple one "My first project" Only has features like
[Code]...
Edit 1 If anyone can tell me the diffrence between TextBox and RichTextBox would be nice also
Files Open In Two Browsers
Jun 13, 2011In our application, when you go to "Menu > Help...", it opens our help files in Internet Explorer, which is the desirable effect. However, we have the shortcut key "F1" set to open the help files as well. It still opens the help in Internet Explorer... but it also opens them up at the same time in the user's default web browser![code]...
View 1 RepliesGet A List Of All Files That Are Open?
Nov 16, 2009Is there a way to get a list of all the files that are open? I can get a list of processes, but I want to know all the files that each program has open (or at least has the handle of).
View 1 RepliesHow To Open Files In Listbox
Mar 14, 2011I have a simple program which display the file names in a list box. And I want the file to open when it is clicked. The problem is I don't know the code on how to open the selected file in the listbox.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
For Each file As String In My.Computer.FileSystem.GetFiles("C: GlennOffice Doc"
[Code]....
How To Open Large PDF Files
May 13, 2009I am opening a large PDF file using the following
Process.Start(Application.StartupPath & "PREVI.pdf")
I have two questions:
1) Is there a way to go directly to a page number?
2) Can I write a code to have the table of contents show up on the left side of the document so users can click on to go to different sections of the document, not sure if this needs to be done while creating the PDF or if we can do it by code.
How To Open Registry Files
Nov 18, 2009Is there any way I can open a registry file that is not from the local machine? I have the software and system files from another PC and need to create a small VB app to read and get values from the files. The other PC is down and I just have the registry files.
View 2 RepliesList Box Used To Open Files?
Feb 18, 2010I'm working on a project, basically writing a small application intended to allow the user to open files from a specific directory, edit them without saving (through a RTE), then export the edited content to a word document using bookmarks.Part of this program I would truly like to add would be a list box displaying the name of files in a specific directory - and for the user to be able to click on each file name in the list box, and for the file contents to display within my RTE.
View 11 Replies