IDE :: Open A Program Written VS 2008 In VB2010 And Get Security Error

Sep 6, 2009

After upgrading code to VS2010, the error "MSB3134: The permission set requested by the application exceeded the permissions allowed by the Internet or Intranet zones. Select Full Trust or to continue using partial trust, define your custom permission set in the Security Page of the Project Designer. Bentley Software Loader". The same code ran fine in VS 2008

View 3 Replies


ADVERTISEMENT

Vb2010 - When Debug The Program Error Says ExecuteReader Requires An Open And Available Connection

Aug 2, 2011

I have o problem on my codes sqldr = sqlcmd.ExecuteReader when i debug the program error says ExecuteReader requires an open and available Connection. The connection's current state is closed. i dont know what its means that error..

View 1 Replies

Installation - Downloaded A Program Source Code Written In VB6 - Could Not Open The Files

Aug 3, 2011

I have VB 2008 Express installed in my PC. I downloaded a program source code written in VB6 but could not open the files. What do I need to do to get this codes displayed.

View 4 Replies

VB2010 Express Written On A 64 Bit Machine - Run On A 32 Bit

May 21, 2012

wrote a program which works perfectly fine on the Win7 64 bit machine I wrote it on. Tried to run it over server and previous versions of windows (all 32 bit) and got an error (see screenshot attached) In some googling looked like there was an export function I missed so I've done: -Tools -> Options -> Projects and Solutions -> Check "Show Advanced Build Configurations" box -Project -> project properties -> Compile -> Advanced Compile -> and I've read there is something that should be changed here (the target framework?)

[Code]...

View 2 Replies

VS 2008 Error When Open Program In Windows XP

Mar 22, 2009

this error when i open my program in windows XP ....

View 2 Replies

Error #-2147012721: A Security Error Ocurred Source: Msxml3.dll Windows Server 2008

Jul 13, 2010

the next issue, that is only shown when the server is a Windows server 2008 machine , this is the information that I've found

[Code]...

View 2 Replies

Vb2010 And Access Database Error In Program Files?

Nov 5, 2011

I finished my application whith vb2010, this application uses a Access database. I have a problem because when I install my application he put database in de same path "program files" and this path is only read And my application crahed. I know how to installer put database in other path but I don't know how to tell my application to find this database,

View 4 Replies

VS 2008 Hidden Dlls - Security Program That Monitors The Keystokeswebsitesprocesses

Dec 30, 2009

I have created a security program that monitors the keystokeswebsitesprocesses... I want to FIRST ask if this is a legal question; for, my purpose in this program is security reasons (eg. following up on employees to make sure that they are doing what they are paid to do. They all know this is running, and have been warned not to go to sites and enter information they do not want reviewed).

Second, I want this program to be hidden so that techy persons cannot go into task manager and end the process, then go on to some porn site! How could I make this app hidden, or at the very least make it 'un-end-able' from the task manager?

View 5 Replies

DB/Reporting :: Open Source ETL Applications Written In Either Vb Or C#?

Apr 27, 2008

Does anyone know of any open source ETL applications written in either vb or c#?I am looking for some or all the features below:

* Read text files and have the ability to split files.
* Suppress records for failing validation rules.
* Transform values.
* Output the resulting data source to either one or many files and or database tables.

[code]....

View 1 Replies

Open A Text File And Extract The Numbers Written There Into Arrays?

Feb 13, 2010

For my database program, I need to open a text file and extract the numbers written there into arrays.

View 2 Replies

Cannot Open Edmx Xml In Vb2010 Express?

Jan 29, 2011

I am starting programming entity framework by julie lerman. all her examples are in c#, which i do not use. when i right click on the edmx model in solution explorer (vb2010 express), i do not get an 'open with' option, only 'open' which italready is, in design mode.

View 2 Replies

IDE :: Open Files Not Reloaded / VB2010

Feb 23, 2010

When I reload a project the last opened files are not reopened. Is there a option I have to set? This always worked until today. I have reset all settings, no change.

View 2 Replies

Open MS Word And MS Excel In VB2010?

Aug 5, 2010

how to open MS Word and MS Excel in VB2010?

An can you give any site for referrence.

View 2 Replies

Get Windows To Open The Credentials Dialog - Network Folder Security

Jun 2, 2009

I have a treeview control which is being used to browse various folder on the users system drive. It can also be set up to connect network folders using UNC paths e.g "serverfiles". At the moment I'm getting a list of Directories by using My.Computer.FileSystem.GetDirectories however this obviously fails when the folder is password protected.

Is there a way that I can get Windows to open the credentials dialog as you would see in Windows Explorer and deal with the credentials side so then the user name & password is cached as well?

View 2 Replies

Use A Dll Written For Program In C#?

Nov 22, 2011

I have question to ask.

I have a dll file written for reading&writing data on USB.To use dll in VB.Net, one needs to integrate a .vb file which interface to that dll file to use its functions, properties etc..

What I need is to use this dll in a C# project. is this possible?[code]...

View 3 Replies

Disassemble A Program Written For DOS?

Jan 2, 2010

I just want to know whether I can use "Reflector" to disassemble a Program written in DOS and go through all the Codes of that program to learn how that program was made? If the "Reflector" is not the one for DOS Program, could you recommend a Free Disassemler for DOS Program?

View 5 Replies

Application Running A Silent Install Of An MSI - (how To Disable Open File - Security Warning)

Jun 1, 2010

I am writing a small visual basic application to install clean up tools quickly on any machines that we need to work on here at my workplace. I am using 4-5 cleanup programs that I have packaged into MSI's and have batch scripts that I am calling in my visual basic application to run them as silent installs. However, because I am doing the silent installs, windows always pops up with the "open file - security warning" and I have to click run for each individual program. I am wondering how to get around this from my end within the application. I know it can be disabled in windows but I am not wanting to have to go through a process on every machine that I run this program on. I would like to find a fix on the back end in my script.

View 2 Replies

IDE :: Open Form View Designer. File Download Security Warnign Message

Nov 4, 2009

When I open VB projects in Visual Studio 2005 and attempt to view a form view designer I have started getting "File Download - Security Warning" Message prompting a .tmp file in the location of my project. If I close all open designers and rebuild the project I am then able to open the designers OK.I saw a suggestion to 'restore file associations' in Visual Studio and tried this but with no success.

View 1 Replies

Can A Program Written In VB 2005 Run In Windows 7 64 Bit

Mar 21, 2011

I have a program written in VB 2005, the computer used to write the code was running in Windows XP and 32 bit Pentium D. Now, my boss want to buy a new computer to run the program, and he wants the one that comes with Windows 7, 64 bit. Can my program run in the new computer without any problem? Or, is there anything that I need to change for it to run there?

View 12 Replies

Firefox Extension That Was Written In Program 6?

Jan 18, 2011

Is there some Firefox extension that was written in VB.NET / VB6?

Would be nice to have a template for changes.

I have to intercept the Firefox reloading of data (XML data refreshed regularly by some javascript routines).Pretty much as the extension "tamper" does it (url...)

View 4 Replies

Tell Whether A Source Code Is Written In Program?

Mar 30, 2011

I have never used Visual Basic before.

I have some source code for a project to look at. How can I tell whether the code has been written in VB or VB.Net?

View 4 Replies

Why Timer Program Written Isn't Accurate

Oct 1, 2010

I have been trying to create a timer program with VB 2010 to the accuraccy of 0.05seconds (If possible, 0.01s)I insert a timer into the form (Timer1, Interval - 50).[code]But when I run the timer for 1min, the recorded time was 48.05 sec.How can I make my timer more accurate? Is there anything i have done wrongly with the code?

View 2 Replies

Convert A Program Written In VB 4 To VB 2009 Express?

Jan 4, 2010

Is there an easy way to convert a program written in VB 4 to VB 2009 Express? VB 2008 wil not open a .MAK project.

View 7 Replies

Written A Small Program To Set Wallpaper On The Desktop?

Oct 5, 2008

i have written a small program to set wallpaper on the desktop when i change the wallpaper then if I refresh the desktop then problem is that,wall paper is disappeared and a blue screen comes.secondly i want few changes i want to set wallpaper as Tile,Center and stretch i want to use radio buttons on the form for this purpose so how can i make these changes.

View 1 Replies

EventLog Security Error?

Apr 13, 2012

I'm working with vb.net in Visual Studio 2010, I have a method which writes entries in eventlog, this work fine in Windows XP but did not in Windows 7, here it throws a security exception.I allready know that this problem is because the user who exectues this assembly does not have permissions to write the registry, so my question is if does not exist some way to give permissions on the fly, something like declarative permissions or something
like that....this is my code:

Public Shared Sub Loguear(ByVal xsSource As String, ByVal xsMessage As String, ByVal xeEventType As EventLogEntryType, _
ByVal xsLogName As String)[code].....

View 1 Replies

Connexion - Error Indicates That The Name Of The Field Doesn't Exist Or Is Not Well Written

May 6, 2012

Mine is a simple conexion problem but I dont understands what's happening I have another form in the same project which has no problems at all, I desided to create a form to use it as a base form named plantillav only to duplicate forms and intance the others from that one I put it's Modifiers Property = Protected in ortder to modify property values in the other ones I don't know if the process generated a failure.

I created the following strconn:

Public

Class
clientesc

[CODE]...

This table was exported from phpmyadmin (wamp) so it means is created and even with registers inserted directly from console, the problem is when I send from the application, with the following error that indicates that the name of the field doesn't exist or is not well written; Unknown column 'code_empleado' in 'field list'.

View 1 Replies

StreamWriter Error: Cannot Close Stream Until All Bytes Are Written

Feb 10, 2009

I have a testing platform that allows data to be posted to a real time collection system. It uses the StreamWriter object to send both HTTP and XML formats, It works fine, but there is a new request to submit uploaded files. This again works fine, unless the files are over 70k (we need to test upto 3MB). If it is over 70k, the response is the content-length too big. I have changed it so that the content-length is now set dynamically, dependant on the size of the file uploaded. However, when the StreamWriter.Close() runs, the execption The request was aborted: The request was canceled. is generated, with the InnerException Cannot close stream until all bytes are written.

From what I have found on the web, the solution is use StreamWriter.Flush(), but this code is already in place.

[Code]...

View 2 Replies

Make A Security For The Program?

Nov 24, 2010

How can I make my program to work only for certain period of time?Say... I want my program available for only One hour or Two days or one month or etc...

View 2 Replies

Convert An Existing Lambda Function Written In C# To Program?

Mar 29, 2010

I have the below C# Lambda function and I need to convert it to a VB.Net code. I tried many times but I couldn't convert it the right way. [code]...

View 10 Replies

Get Array Data Passed Using ByRef From A .COM Program Written In C++?

Oct 5, 2010

VS 2008 VB/I've implemented an interface to a .com program written in c++. I'm trying to access a data structure array(uNewValues) of type PLCCOMMLib.ANALOG_CONTIN. uNewValues should be a datastructure array of several elements (iSigIDCount). My problem is I only get the first array element of the datastructure.I've tried several methods and looked into marshalling but don't understand how to implement marshalling if that is the correct option.

Code below:

Public Sub AnalogContinUpdate(ByVal iSigIDCount
As Integer,
ByRef puTimeDateStampGMT As PLCCOMMLib._FILETIME,
ByRef uNewValues As PLCCOMMLib.ANALOG_CONTIN)

[code]....

View 2 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved