I run my projects , automatically the output window pops up and tells me some extra info I ont need to see (normally...)==================------ Build started: Project: cm, Configuration: Debug Any CPU ------
View 2 RepliesIt's been a while since I have posted. Good to be back. I am doing some scripting work using Visual Studio 2005 Tools for application. I am having an issue outputting to the debug window. My line of System.Diagnostics.Debug.WriteLine("Test") I have the output window open when I start debugging and am using the debugger. What happens is the debug window seems to go away when I allow the line to execute. After the line executes if I go back to the output window nothing is there. The message does not go to the Immediate window either.
View 5 RepliesI am using Visual Studio 2010 Professional in trial mode... and suddenly the Output window won't show my Debug.Write() stuff. It had been showing it for the past month.I have been using the 2010 version for 30 days (after upgrading from Visual Studio 2003) in trial mode. I just renewed the trial for the extra 60 days, and the "About Visual Studio" window says I still have 59 days left.
I have verified that the application is running properly, without errors. When I purposely generate an error, the Output Window properly shows the error and the stack trace I've already checked my Build>Configuration... it's in "Debug" mode, not "Release". The Debug.Write() text is not going to the Immediate window, either.One other point, I tried running the same application in the Visual Studio 2010 Express Edition, and it complained that it could not debug the specified code, though it did properly build it so that it would run in the build. Could Visual Studio 2010 Express have modified something in my project files to disable the debugging output?
In my case, I'd like to output to a ListView or TextBox or for that matter, any control which can accept text. For this purpose, I'd like to have a general purpose Trace/Debug listener which I can hook to in order to process the messages (convert to a ListViewItem or something) before outputting it. Is there any way I can achieve this or do I have to build my own Trace Listener? If it's worth noting, I run VS2010 ultimate & VS2008 professional. Solution should be in preferably be in VB.NET but C# is okay.
View 1 RepliesPrivate Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Microsoft.VisualBasic.Interaction.Beep()
System.Diagnostics.Debug.WriteLine(3 + 2)
End Sub
Why I don't see in Output window number 5 as output?
The build output path is ..inWhat does it mean ..?I mean what is the root folder?If there are multiple projects, should we set the individual path of each project consistently?
View 4 RepliesWhen i ran some applications, more ofter than not there will be some messages showing in the immediate window, such as:
A first chance exception of type 'System.InvalidCastException' occurred in Microsoft.VisualBasic.dll
A first chance exception of type 'System.InvalidCastException' occurred in
[code].....
Is it possible to send window messages from one computer to another through Dot Net 2008.suppose i have 2 computers on a domain, now i want to send message from one computer to another.
View 3 RepliesWhat I am about to do build is a UI that will allow a power user to build complex queries.
This is non-trivial, but very common. So before I re-invent the wheel, I would like to see if anybody can point me to some already-written free code or release some of their own.
Required:
To be able to specify some 'where-clause' type logic like this: Age>21 and (Citizen=True or HasGreeCard=True) but without having to type the query code, instead, use a UI with constrained options and on-the-fly syntax checking (e.g., no unclosed parenthesis or ending a term with an Operator).
I've seen this type of thing in many line-of-business apps, where you can say 'add condition' and another line appears on the UI like this:
Dropdown of fields Dropdown of ops (=, >, etc) Blank box for entry
And you can add more lines, and the lines are all and'ed, but you can also decide to OR a few, or insert parenthesis (explicity or via indenting), NOT a line, insert, delete, and move lines around, etc.
Not required but nice:
WPF - I could convert from winforms. Extensibility using OO constructs. Validate the sanity of the query. Emit a System.Linq.Expressions expression tree - or similar data structure. If it attempts to execute the query I don't need that; but I don't mind removing it.
Please can someone point me in the right direction? I would like to build my own code designer window similar to that of the one within the VB2010 IDE.I am not sure how to tackle this, at first I was thinking of using RichTextBox as this can accommodate the fonts and colors.
An example of what I am trying to achieve.Should be able to outline, expand and colapse based on my own tags. e.g. in the VB.Net IDE a function and end function are tags that would produce an outline
Should be able to change color of text based on characters. e.g. ' would turn green in the VB.Net ide as it is a comment Should be able to indent based on specific tags. e.g. With - End with would auto indent within the VB.Net ide
I should be able to cover the text color and indents using RichTextBox, but I am struggling with the outline expand and colapse.The purpose of the project is to build a simple interface for creating config files that use only specific tags
I'm using vb 2010 and need to know how to use the output window while debugging
View 2 RepliesI made a Visual Basic program that adds an interface to some Windows network diagnostic tools like Ping and Telnet. Currently the program opens a new DOS window and displays the results. For each system you test or each time you hit the button it opens a new window.
What I want it to do is redirect the output back to the program and display it using a List box or whichever is the best choice for displaying results. I have checked out posts that talk about capturing the text and redirecting it back to the program but I can never get those to work.
Is there an easy answer for this or does it entail a lot of additional coding? I am using Visual Studio 2008.
What iam trying to make is an app that would automaticly start two other applications, where one of them needs a single key pressed as input, and copy some link to the clipboard.The application that needs some keys pressed in order to start is this LINK As you can see it looks like some CMD piece of application. i want the output from that window into a TextBox on my form, but have been unable to do that.Ive tried two methods allready.. The most described and used is the RedirectStandardOutput and RedirectStandardInput methods:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim p As New Process
RichTextBox1.Text = "* - Starting Modern Warfare 2 Server Admin Tool"
[code]....
2. This would also store a "log" as the textfile for later use.However the tricky part for me is to:
1. Get the output from the mw2sa.exe window to automaticly update the textfile every few seconds
2. Be able to read the textfile in the textbox. VB tells me its unable to read the textfile as it is beeing used.
3. Somehow if i use the
ProcID = Shell("cmd /K mw2sa.exe > log.txt", AppWinStyle.NormalFocus)
To launch the program all i get is a black cmd window.. However, a log.txt file is created with the correct output, but since the cmd window isnt showing any output i dont think im able to use sendkeys to start the program. And if i try with only
ProcID = Shell("mw2sa.exe > log.txt", AppWinStyle.NormalFocus)
I get the correct cmd window with all the right output. Sendkeys is also able to pass the key to start the program... But no log.txt is created!
I have a fellow employee who is learning Visual Basic and in one of her assignments she is using the debug.writeline statement. Example: Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load Debug.WriteLine("This line always prints") End Sub When you run the program, nothing prints to the Output window. I have tried it in VS2008 and VS2010. Brian Allison
View 7 RepliesI've got an old dynamic link library that I'm using which was created primarily to be used in a console environment. As such it generally indicates what it's doing through Console.Write(). I've recently created a windows form which is using some of the functions from this library. I'd like to be able to grab the console output and place it in a textbox on my windows form so that the user can have some indication of the progress (right now it just says "Working").
View 3 RepliesNothing is printed in my debug output window anymore.
Debug
.Print does nothing.
"Debug > Output" shows empty Output window.
Note: "Tools / Options / Debugging / General / Redirect all Output" is checked.
software developer
"Working with Multiple Forms in Visual Basic .NET: Upgrading to .NET" url...states very clearly, "you need an instance of a form before you can display it or work with any of its controls or properties". Granted, this was written for VB.NET 2003, but I can't find any reference where this has been changed in later versions. [code] Running this in Debug, both OriginalForm and InstantiatedCopy work fine. The Output window displays the values for both forms identically. (I'm using Visual Studio Professional 2010.)
View 17 RepliesI am trying a .Net remoting project hosted in a console application.I have the following code in remote object class.
[Code]...
I installed the new one. I then imported an old project made using vb 2008 EE.I found that a few errors were reported.In the project I addressed some function from a dll called "rsource.dll". I used the following function call:Public Declare Function rs_init Lib "rsource.dll" Alias "init" () As Double.The other different thing is the projevt was developed on a 32 bit OS but since then I have upgraded to 64bit (if this makes any difference). he other thing is where is the debugger PAUSE button. has it been removed from vb 2010?Also when i run debug it seems to create the exe in the Build output target folder instead of the default bindebug folder why is this?
View 5 RepliesI've done most of my testing under vb2008 debug. Now that I'm doing higher level testing with the executable I've found that I have to set the build output path every time I start the project - in fact, If I don't keep the project properties window open, I have to change the path back after every build.
I'm working with several projects whose executables interact, therefore I am constantly switching projects to tweek one of the other modules and I have to configure the build output path again every time.
Is there a way to tell it to remember the path "permanently" until I change it?
I'm developing a Win Form application that can be run from the command-line interface. I'm looking for a way to print messages to console ("cmd") window.I've tried to use "console.writeline" but nothing was displayed. What am I miss? Should I redirect the stdout to the cmd window? If so - how?
View 4 RepliesModule Module1
Sub Main()
Console.WriteLine(CInt("123.656"))
End Sub
End Module
In the above code as soon the the output appears in a window,the window disappears....How to solve this problem?Do i need to add some code to hold the output window for a longer time?
Since reinstalling VS2010, it has not been displaying proper debug info. I don't think I changed any settings but I have had a hunt through the options and can't see anything I might have messed up. I have had a quikck search and other people seem to have had the same problem but no solution. I'm running Windows 7 x64 with latest updates, if that matters.
View 1 RepliesI want to use spy++ or Winspector But from what i Read they Dont work on windows 7 64bit Correct ? Im trying to read WM_COMMAND Messages from a App.And whenever i Select 'Log Messages' And find the windows etc.Nothing show's up. Is there a alternative ?
View 3 Replieshere I am again I have written a small class called 'Messages' that holds the user messages.The case is that I am not being able to import it. Here it is:
[Code]...
How to configure specflow to output step definitions in a nunit output window?
View 1 RepliesI'm trying to build an application to monitor a site to build statistics from the data being read. This HTML looks like this.
<div id="history">
<h4>HISTORY</h4>
<table border="0" cellspacing="0" cellpadding="0">
[code]...
Now I can read the html and put the text anywhere, I just don't how to read specific parts so I can separate the data out.
I have a Form with a Media Player in it. Which plays a Song.
[Code]...
It's playing in the background since the Form is hidden. When I play itin Debug, everything works fine. When I run the app outside Debug, I get this error: [URL] The Music File is there, but strangely, there comes this weird error.
A particular VB.NET project is actually throwing 'Build Failed' But when I try rebuilding again it says 'Rebuild Succeeded'. It keeps alternating this behavior. Kind of random. Any vbc.exe issue of long locking the PDB or xml files?
View 9 RepliesI have a vb.net 2008 windows form application that I was just assigned to work on. how to maintain and test changes to both the pre build and the post build events? Can you tell me how to test these events? My postbuild event, I believe calls a project file in the solution file that wraps files together in a bundle in debug mode. Can you tell me how the posbuild event works and when it is called?
View 2 Replies