How To Build Output Path
Jun 24, 2009The build output path is ..inWhat does it mean ..?I mean what is the root folder?If there are multiple projects, should we set the individual path of each project consistently?
View 4 Replies
ADVERTISEMENT
Set Program2008 Build Output Path "permanently"?
Dec 20, 2011I've done most of my testing under vb2008 debug. Now that I'm doing higher level testing with the executable I've found that I have to set the build output path every time I start the project - in fact, If I don't keep the project properties window open, I have to change the path back after every build.
I'm working with several projects whose executables interact, therefore I am constantly switching projects to tweek one of the other modules and I have to configure the build output path again every time.
Is there a way to tell it to remember the path "permanently" until I change it?
IDE :: Output Window With Build Messages?
Feb 9, 2009I run my projects , automatically the output window pops up and tells me some extra info I ont need to see (normally...)==================------ Build started: Project: cm, Configuration: Debug Any CPU ------
View 2 RepliesC# - WPF UI To Allow User To Build A Complex Query And Output An Expression Tree
Dec 29, 2011What I am about to do build is a UI that will allow a power user to build complex queries.
This is non-trivial, but very common. So before I re-invent the wheel, I would like to see if anybody can point me to some already-written free code or release some of their own.
Required:
To be able to specify some 'where-clause' type logic like this: Age>21 and (Citizen=True or HasGreeCard=True) but without having to type the query code, instead, use a UI with constrained options and on-the-fly syntax checking (e.g., no unclosed parenthesis or ending a term with an Operator).
I've seen this type of thing in many line-of-business apps, where you can say 'add condition' and another line appears on the UI like this:
Dropdown of fields Dropdown of ops (=, >, etc) Blank box for entry
And you can add more lines, and the lines are all and'ed, but you can also decide to OR a few, or insert parenthesis (explicity or via indenting), NOT a line, insert, delete, and move lines around, etc.
Not required but nice:
WPF - I could convert from winforms. Extensibility using OO constructs. Validate the sanity of the query. Emit a System.Linq.Expressions expression tree - or similar data structure. If it attempts to execute the query I don't need that; but I don't mind removing it.
VS 2008 Reference And Build Path
Jul 30, 2009Suppose in a solution there are two projects A and B. A is a class library project, B is a console project. I set the output path of project A as ..in elease, after I compiled it, I found it is ture that a created file testA.dll is there. Just curiously I checked the folder ..indebug, it is empty. Likewise, I set the output path of project B as ..in
elease. Okay, then I add the file testA.dll to the project B and run the solution etc..
My question is that after these procedures, I found that testA.dll is also in the ..indebug of project A. And also when I checked the folder ..indebug of B, testA.dll is there as well but nothing in the ..in elease of B. I just want to know the secrets of the build path, I am always confused in the real world because there are several projects in a solution.
Getting The Output Image Path To Display?
Jan 8, 2009I designed an interface which calls an executable program written in c. This program needs an input image and outputs another image which has the name: "<the same as the input one>_out". My interface has to display both images (input in picturebox1 and output in picturebox2), I've done so for the input image but now I need to get the path for the output one to display it. I know that there are functions like My.Computer.FileSystem.GetFileInfo() or My.Computer.FileSystem.FindInFiles() but I think they're useless for me, do you think so? Do you know any methods or functions to get the path of my output file? Is it possible?
View 12 RepliesIDE Output Path For Generated Executable
Jun 24, 2011I am trying to update an application that was developed a couple of months ago on VB of Visual Studio 2005. The "Build output path:" for the project is pointing to a folder in which I collected a few executables related to my activity, BinDir/. It is just next to the project's folder ProjName/ on my disk. Contrary to the past, when I build my project now, the .exe is created in the ProjName/obj/Debug folder, instead of being directed to the BinDir/Debug folder. In the IDE's Output tab (while building), the path of the generated executable appears correctly, but in reality it is located somewhere else. I tried again and now it seems like the executable is created in both places. The obj/ version is just redundant now.
View 1 RepliesBuild The Shortest Path Between Any 2 Points In This List - Develop Some AI Code For A Game ?
Aug 17, 2010I'm trying to develop some AI code for a game I'm creating. I have a list of x,y coords and I need help figuring out what I can use/do to build the shortest path between any 2 points in this list. I would like to build a function that I can pass a list of valid X,Y coords to use when generating the path, start point, end point, and have it return a list of points, which would be the shortest path between the start and end point, using the list of points supplied. I have looked at A* and Dijkstra's, but am having problems implementing the algs in code, as all this seems graph based.
View 3 RepliesChange The Output File Path Of The Adobe PDF Printer?
Jun 19, 2011I would like to change the output file path of the Adobe PDF Printer via code. Currently I am setting the destination path using the Adobe PDF preferences which works fine, however if I change the path in my program I have to go back to the Adobe printer and manually set the new path. How can I change the Adobe output file path via code?
My.Computer.Registry.SetValue("HKEY_CURRENT_USERSoftwareAdobeAcrobat
Distiller9.0AdobePDFOutputFolder",
"2",
"C:YOUR PATH HERE"
)
Create Exe In Build Output Target Folder Instead Of Default Bindebug Folder
Nov 21, 2010I installed the new one. I then imported an old project made using vb 2008 EE.I found that a few errors were reported.In the project I addressed some function from a dll called "rsource.dll". I used the following function call:Public Declare Function rs_init Lib "rsource.dll" Alias "init" () As Double.The other different thing is the projevt was developed on a 32 bit OS but since then I have upgraded to 64bit (if this makes any difference). he other thing is where is the debugger PAUSE button. has it been removed from vb 2010?Also when i run debug it seems to create the exe in the Build output target folder instead of the default bindebug folder why is this?
View 5 RepliesGet "Path / File Access" Error When Build A Setup Package For A VB 6 Project
Mar 19, 2010I am trying to build a setup package for a VB 6 project. I get a "Path/file access error", what can i do to over come that
View 2 RepliesPath Of .zip file Has Spaces In It / It's Not Recognizing Path As Valid Path
Aug 22, 2006I have a Access program and I'm using VBA code in the background to run Winunzip using shell command. Well, the path of the .zip file has spaces in it and it's not recongizing the path as a valid path. Is there a another way to tackle this problem besides the shell?I can't us pkzip either. Has you can see I had to use progra~1 instead of Program Files.[code]
View 2 RepliesVS 2008 : Build An Application To Monitor A Site To Build Statistics From The Data Being Read?
Mar 3, 2010I'm trying to build an application to monitor a site to build statistics from the data being read. This HTML looks like this.
<div id="history">
<h4>HISTORY</h4>
<table border="0" cellspacing="0" cellpadding="0">
[code]...
Now I can read the html and put the text anywhere, I just don't how to read specific parts so I can separate the data out.
Axinterop.wmpLib.dll Works OK In Debug Build - Not OK In Release Build
Feb 15, 2012I have a Form with a Media Player in it. Which plays a Song.
[Code]...
It's playing in the background since the Form is hidden. When I play itin Debug, everything works fine. When I run the app outside Debug, I get this error: [URL] The Music File is there, but strangely, there comes this weird error.
IDE :: Inconsistent Build Response - Throwing 'Build Failed'
Nov 27, 2011A particular VB.NET project is actually throwing 'Build Failed' But when I try rebuilding again it says 'Rebuild Succeeded'. It keeps alternating this behavior. Kind of random. Any vbc.exe issue of long locking the PDB or xml files?
View 9 RepliesMaintain And Test Changes To Both The Pre Build And The Post Build Events?
Jul 30, 2011I have a vb.net 2008 windows form application that I was just assigned to work on. how to maintain and test changes to both the pre build and the post build events? Can you tell me how to test these events? My postbuild event, I believe calls a project file in the solution file that wraps files together in a bundle in debug mode. Can you tell me how the posbuild event works and when it is called?
View 2 RepliesVS 2008 Make A Release Build Instead Of A Debug Build?
May 3, 2010I am using 2008 Express Edition. I am trying to make a Release build instead of a Debug build.Under Tools->Options, Projects and Solutions->General - I checked Show advanced build configurations. The option to switch configurations does not show up in the IDE.
After this, I went to the Project Properties->Compile and switched the Configuration from Active(Debug) to Release.After building, I looked in my project directory, however only in the Debug sub-directory was the .exe and nothing in the Release sub-directory.I have used Visual C++ Express Edition, where I noticed that if you do not change to Release in the IDE than after changing to Release in properties, resets the project to the last configuration setting which is usually Debug.how to make the Debug/Release box available in the IDE, since Tools/Options does not make it show up?
[2008] Application Deployment - Build->build Myapp
Mar 7, 2009I just created a simple application. I Builded that using build->build myapp. I got .exe of that application. i runned. all went fine. but when i closed that app, even after closing it is in memory. it is still running. how to deploy it properly?
View 12 RepliesPerform Release Build And Not Debug Build For Exe
Aug 4, 2010I have some very simple questions about making a release build exe in vb.net using MS VB 2010 Express.
I realize that my project's executable is built in the bin/debug folder. However, when I copy this to any other location on my computer or someone else's, this executable does not function. I have read that I need to create a release build but in MS VB 2010 Express, when I use the Project-Properties menu and change the Compile tab configuration to Release and the path to binRelease, I still get the exe in the binDebug folder and not the binRelease folder.
1) Is it normal that exe's from the debug folder do not function outside of the debug folder?
2) Most importantly, if the release build produces a faster exe, could someone please explain step by step how to do this with MS VB 2010 Express ? I do not see any button on the compile tab in the project properties that actually builds the release.
No Output In Asynchronous Program - Retrieve Output After The Events Are Invoked?
Mar 1, 2012What I am trying to do: There are three powershell scripts with different time delays as shown below.I am trying to run them asynchronously in .NET and I followed this article to implement Asyncrhonous programming. Where I am stuck:The I am not able to retrieve output after the events are invoked.The scripts are being called but then the program ends and it shows "Press any key to continue" in console windows.I don't what I am missing here.
Info: JobRequest is a class that I use to pass around information keep track of jobs.
Sub Main()
OurAsyncFunctionCalling("psDelayScript2.ps1", "-arg1 4 -arg2 5", 1)
OurAsyncFunctionCalling("psDelayScript1.ps1", "-arg1 2 -arg2 3", 2)[code]......
Can't Get The Build To Build A Release Version In Vb
Jun 17, 2009I was able to build both debug and release versions of my VB code before now I no longer have the option to build a release version. How do I turn it back on
View 3 RepliesUnable To See In Output Window Number 5 As Output?
Sep 25, 2011Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Microsoft.VisualBasic.Interaction.Beep()
System.Diagnostics.Debug.WriteLine(3 + 2)
End Sub
Why I don't see in Output window number 5 as output?
.net - Why Only Getting One Output Value (and No Debug Output) From This Code?
Jun 14, 2012I'm just going to throw all my code in here in case there's something wrong with a piece of the code not in the "SelectName()" sub.
Module Module1
Dim selectednames As String = ""
Dim index As Short = 0
Dim inarray As Boolean = False
[code]....
Here's an image of what it does (I suppose you can see what went wrong)13 inputs, 3 outputs expected, only 1 output given.As from what I've figured out so far, it's doing the correct amount of loops etc. It's just as soon as it starts generating the "winner" for the 2nd game key it doesn't get a string value from namesarray.Also, why is
For x = 0 To totalnames - 1
Debug.Print("namesarray(" & x & ") = " & namesarray(x))
Next
not giving me a debug output?
Interface And Graphics :: Drawing Dotted Path Lines, With Even Dots Along The Path Line?
Apr 13, 2012Problem drawing dotted path lines, with even dots along the path line.I want to draw a path line that can be any shape (square, round, outline etc), and along this path line I want even dots to appear.
I also want to be able to resize the shape (as in the example attached)This is very easy to do using "DrawPath" and defining points for the path and using a pen defined as dots.The problem I have is I want the dots to be evenly placed along the path, on any shape or size I draw.In the example I have created, I create a square with 4 points and draw a dotted path.There are 2 buttons that allows me to resize the square (larger or smaller) this helps show the problem more clearly.
The path starts at the top left corner and finishes back at the top left corner, the dots are evenly placed along the path, except the final dots at the end of the path. (Sometimes the dots are even and other times they are not even).The shapes I want to draw can be any size and any shape, but I have used a square in this example to show the problem I have. point me in the direction I need to go that allows me to draw the dots and give the impression that they are even all along the path, for all shapes and sizes.
In the pictures below if you change the size of the shape, one will have even looking dots, the other will not.
[Code]...
Make The Media Path To The Video Path Stay Consistent No Matter Where Go?
Dec 7, 2010i used the following codes:
private mediapath as string = "C:movie.avi"
private form1_loads blah blah blah
[code].....
Create A Function To Convert A Mapped Drive Path To A UNC Path?
Apr 7, 2009I am trying to create a function to convert a mapped drive path to a UNC path. I did some googling and found several different pages on the matter. I am most interested in the first one, but I cannot seem to get the code to cooperate. Since the original post was in C#, here is my VB.NET conversion:
[Code]...
Publish Build Errors (But No Errors In Debug Or Build) VB 2010
Jan 4, 2012So when i build or click debug on my program. No errors come up and its smooth. So i decide to publish my programme. However. I come up with a bunch of errors during the publishing.
Here they are:Error 1 Cannot publish because a project failed to build. 1 1 Simple CALC
Error 2 Unable to copy file "binReleaseSimple CALC.exe.manifest" to "binReleaseapp.publishApplication FilesSimple CALC_1_0_0_0Simple CALC.exe.manifest". The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.
Access A File Using Relative Path Or Virtual Path?
May 22, 2012I am trying to read and display a file using MapPath as follows :
Response.ContentType = "Application/pdf"
Dim FilePath As String = MapPath("../Document/123.pdf")
Response.WriteFile(FilePath)
Response.End()
This procedure will work fine and display in the browser. However, if I save the file to C:Document123.pdf, how can I access this file using relative path in MapPath function. Is there an option to access the file which is saved out of IIS server? I am using vb.net 2003.
Convert Unix File Path To Windows Path?
Jun 14, 2012I'm using acrobat that returns unix paths instead of windows path's. So im wondering if there is a way in vb.net to convert the path to windows path.
i tried using:
docs(i) = javaScriptObj.path().ToString.Replace("/", "").Substring(1)
position = docs(i).IndexOf("")
docs(i) = docs(i).Substring(0, position) + ":" + docs(i).Substring(position + 1)
this only works on local files, but fails when im starting to use network drives.
Drawing Dotted Path Lines, With Even Dots Along The Path
Apr 12, 2012I want to draw a path line that can be any shape (square, round, outline etc), and along this path line I want even dots to appear. I also want to be able to resize the shape (as in the example attached) This is very easy to do using "DrawPath" and defining points for the path and using a pen defined as dots. The problem I have is I want the dots to be evenly placed along the path, on any shape or size I draw.
In the example I have created, I create a square with 4 points and draw a dotted path. There are 2 buttons that allows me to resize the square (larger or smaller) this helps show the problem more clearly. The path starts at the top left corner and finishes back at the top left corner, the dots are evenly placed along the path, except the final dots at the end of the path. (Sometimes the dots are even and other times they are not even).
The shapes I want to draw can be any size and any shape, but I have used a square in this example to show the problem I have. I need to to draw the dots and give the impression that they are even all along the path, for all shapes and sizes. [Code]