Get "Path / File Access" Error When Build A Setup Package For A VB 6 Project
Mar 19, 2010I am trying to build a setup package for a VB 6 project. I get a "Path/file access error", what can i do to over come that
View 2 RepliesI am trying to build a setup package for a VB 6 project. I get a "Path/file access error", what can i do to over come that
View 2 RepliesI do one project in visual basic 2010.In visual basic 6 project can be make Package and deployment (setup file or install file) file using Package and deployment wizard.But in visual basic 2010 express edition does not have Package and deployment wizard.how to make Package and deployment (setup file or install file) file in visual basic 2010 project?
View 4 RepliesI got "Unrecoverable build error" when building setup project.I try the solution in [URL].. but did not work out.
View 1 RepliesI've created a setup project for a VB.NET 2010 application that I've written. The application, and the installer both work fine on my development machine.The installer works fine on other machines, but when I run my application it immediately crashes and dies without telling me anything useful. I've tried it on Windows 7, Windows XP, and Windows Vista machines... and all had the same problem, so I think it's more of a package configuration issue than a machine-specific problem.Here's the most useful information that I was able to get out of it:
[Code]...
I am using vs 2003 to build a setup project but got this error message"Could not find file ..., Not enough storage is available to complete this operation."I checked the path of the file, it is correct. After I remove this file from the setup project, I can build it successfully and the result msi file is about 250MB, the file I removed is about 260MB, is there any limitation about the size of the file in setup project or the total size of msi file? If so, how can I build the setup project?
View 19 RepliesI added a setup project to a winform vb.net app which otherwise builds fine. Once the setup project is added to the solution, however, the build fails with the following error;Unrecoverable build error.As there does not seem to be much information I can't figure what the problem is. What can I do from here to fix this to get deployment package?
View 1 RepliesI have a setup project which is full of VB Libraries / apps...when I try to build it in the debug configuration it always errors out with this error[code]...
View 9 RepliesI include 2 exes in my setup project which share dlls. In 2008 this just resulted in warnings when building but I now get an error instead indicating that the file is already included.I can fix this by excluding them but they will reappear after each build so have to be excluded again which slows the process down - example error message is below:
Error 14 Two or more objects have the same target location ('[targetdir]interop.excel.dll') C:DevelopmentPIMSPIMSSetupPIMSSetup.vdproj PIMSSetup
I am wanting to use an application to package all my files together into a setup package. I have tried InstallShield 2011, but when i click on Visual Basic .net wizard, it tells me I do not have Visual Studio.NET installed on my system. I am currently using VB2010 Express How can I fix this... or is there a better application available for packaging?
View 2 Replieshow I can include a file in a setup.exe package and have it copy/add that file into a specific folder/directory when the install is run?
I have a Crystal Report that is in the application's "Release" folder in the development environment. I need to have this .rpt file copied to a folder on the user's C: drive when the Setup.exe is run.
My vb.net app ORDER is at d:myapporder. I created a setup project named it as ordersetup in the same solution file. Once I moved ORDER to e:myapporder, ordersetup can not load any more. How to fix it?
View 4 RepliesI have developed a windows forms desktop application using vb.net 2005. It is installed on client computers using a setup package.
One of the clients wants to redistribute the setup package to other users.
He wants to provide the users with an initialization file containing the database server name which they will be using, so that it is available when the application is installed. They are apparently incapable of physically typing in a server name themselves after installing the application.
Is there any way I can include a separate file with the setup package which the application can find after it has been installed?
When i make Setup of my project then my crystal reports keeps old database path how can i resolve it please help me.
View 2 RepliesI am getting the following error when trying to open a vb .net 1.0 project using VS2002."Unable to open Web project 'ProjectName'.The file path 'FilePath' does not correspond to the URL 'ProjectURL'. The two need to map to the same server location. HTTP 404: Object Not Found."I have tried ALL of the links that Google threw at me (on the first page) on searching on "unable to open web project the two need to map to the same server location" term.I get this error when trying to open an existing vb.net 1.0 project and also when creating a new one.
View 1 RepliesIm trying to write to a file I created and place "Unregistered" in it. Thought it would be a simple task but keep getting an error. Its happening when I try and open the file to write. This is the error: Access to the path 'G:\Projects\Project\pbss\bin\Debug\5\pbssv\Data.DB' is denied.
Ive tried adding the file attributes to read-write and still get the same. Most of the code ive looked at via a google search points to the same as ive got for the Added default value area. Im not sure if there is a conflict between the 2 different ways im accessing the file when creating and writing too? [Code]
how can i get the folder path for the system tray or how can i buid a setup file that install a icon in the system tray using VS 2005.I know how to build setup file with creating icons in desktop and quick launch bar, but wanted to know how to add the icon into system tray after i install it
View 1 RepliesI am trying to run the application created in the example at [URL] The code errors at the line dtsDataReader = dtsCommand.ExecuteReader(CommandBehavior.Default)
the error is A requested parameter does not exist in the package. I have checked everything that i can think of in the package Also when I try to run the package using the dtexecui utility I two errors "Error: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW.
[Code]...
I'm trying to migrate a WPF Application based on C# to identical project but based writed in VB.NET.I have some problem with XAML Window.if I build solution with this xaml, it's works correctly. But, if I write:<menus:MenuFullMaintenance Name="Test01" />I have this error message:"Error 8 Type 'My.Frame.UI.WPF.MenuFullMaintenance' is not defined. (Window1.g.vb)"The "Name" property raise this exception...why? How can fix it?
View 1 RepliesI have completed my VB project using vb 2008 express edition..I am not able to create a set up file for my project and I think it is because of the file path i have provided in my program
dbSource = "Data Source = C:Documents and SettingscfadminDesktopLead_managementLead_Management_ProjectLead_Management_ProjectLondon.mdb"
The above path is a fixed path which connects my program to the database. Now when I create a set up file and try to run on another machine it wont recognize this path . have placed the database in the same folder that of the program.
I was studying visual basic 2008 and had reached almost 60% of it when I was told that my course curriculum included visual basic 2005. I will now have to reinstall visual basic 2005(.net framework 2) instead of visual basic 2008(3.5 .net framework). I was wondering- will it be completely different vb2005 and vb2008? I really wanted to stick to vb2008, I was getting the hang of it. Also, I was wondering, can I run my application vb2008 in .net framework? Is there any way around? Also, I used advanced installer to build a setup file for my application? Now the question is will the other computer(the one which will install from the set up) need .net framework of 3.5(since I built apps in vb2008)?
View 1 RepliesI am trying to read and display a file using MapPath as follows :
Response.ContentType = "Application/pdf"
Dim FilePath As String = MapPath("../Document/123.pdf")
Response.WriteFile(FilePath)
Response.End()
This procedure will work fine and display in the browser. However, if I save the file to C:Document123.pdf, how can I access this file using relative path in MapPath function. Is there an option to access the file which is saved out of IIS server? I am using vb.net 2003.
I finished an important project (Visual Studio 2008 Professional Edition) and now I have to deliver it with an appropriate installation program. My product is composed by a lot of projects and each of them generates an exe file with its images, help, xml , database etc. A main exe calls a sub exe for the work it has to do passing appropriate parameters. I think is not suitable to use a click-once feature and I have looked for the deployment wizard but I didn�t found a complete documentation and moreover some example step by step.where can I find that documentation, tutorial and example ? It�s possible to customize the forms generated by the wizard ?
View 8 RepliesI am using .net 3.5 and vb.net 2008 I have a program that copies access databases (.mdb) over from one server to another to be used ofr a ArcGIS webservice. The databases are edited on one server then nightly copied over to the webserver so they can be consumed in an intranet page).
The program is just a windows form that runs copy command in the load procedure. The program itself is run form the scheduler as an admin user for the machine but no one is actually logged in when it runs at 1 at night. I then get this kind of error reported to me:
[Code]...
What do you think is the best free setup and deployment package for VB.NET? Which is easiest to use?
View 4 Repliesbest free setup and deployment package for VB.NET? Which is easiest to use?
View 2 RepliesIn Visual Basic 2010, when I do Build/Build [project name], sometimes the resulting exe file is put in ..in and other times it's put in ..inRelease. Why does it do this and how can I control it?
View 3 RepliesI have written a small VB.NET simulation program that uses an XML file to configure the simulation. I want to include this file in the project build so that when the application is installed, there will be a default XML file in the required directory.
When I do the Project Publish (within VB 2010 Express), there is no option for including any extra data files in the process.
Is it possible to do this with VB 2010 Express ... or should I try some other project builder/installer.
Is it possible to create an uninstall option in the setup package?
View 1 RepliesI need to Install a MSI Package as a Prerequisite For an Installation Using Wix Setup...How Can I do it....? I first need to install this MSI package and only want to Continue the Set up,If this Installation Would be Successful...
View 2 RepliesI have developed an application which includes CR to display reports. I just found out to run these report, CR runtime engine needs to be installed. I would like to know if possible to include the installation of CR Runtime Engine in the set up of my application? I have noticed the pre-requisite option in VS 2010. But how to add CR Runtime Engine installation to my set up?
View 2 Replies