Image In My Toolstrip Button Cannot Show In Runtime
Jun 2, 2009
I know this may sound really stupid, however, I really do not know. Though I have been programming with VB2005 for about the last 4 years or so, I have never used toolstrip at all. Just simply never has a need to, until now. So, I tried it by simply clicking it in the toolbox, which is simple enough, and choose the toolstrip button for the toolstrip as well. I change the button image to the image I have and want, which seems to be piece of cake operation. Everything looks good in design time. However, when I ran the program, I have the toolstrip simply look blank (no show of the button or the image at all)! The button was there alright, as when I clicked it, it responded. However, it just simply not visible at all, nor the image. When I ran my mouse over it, it did change color (which I guess indicate it is there), but no image either.
I used a toolstrip and set an image for it's button but I removed this image from resource in solution explorer and all toolstrip is gone. I removed images that have !sign in resource tab of properties but toolstrip is not visible in design view. how it returns? before I had typed tooltip instead toolstrip and I edit it now.
I'm developing a windows application using vb.net (VS 2005 and windows XP) I've set images (transparent png files) to buttons.I do it importing images into the resources of the project I could do it for most of the buttons of this project, but today I noticed new images I set, not showing in run time. In the development form I can see all images on buttons, but when I run the application, buttons with new images are missing. This happens to the new images I import and set as button images. I tried few times new images I set are not showing.
i had placed image and backgroundimage in button control in vb.net if button is in disable state,image also shown as disabled(there is no color of image) state.but i want an image as enable (ie.image should be in color) and at the same time button will be disable?
I have a funny one. I have create a form and placed some buttons on it. I placed a background image on some of them. They show perfectly. NOW.. i tried to add a new button with a background image on it. The button shows and works fine, but the image is not display. I even tried coping one of the exsisting buttons.. the same.I placed a pictureBox on with a background image..
In my project, I was first using two ListViews with a few buttons on the side to control actions (add files, remove files, etc). Now, I thought it looked neater if I incorporated those buttons into a ToolStrip, and put the ListViews into a SplitContainer.So I did... One SplitContainer, on the left side a ListView (docked Full) + ToolStrip (docked Top), on the right side exactly the same.
All of a sudden, (it seems to be pretty random), the right ListView (never the left one) seems to jump 'on top of' the ToolStrip. It looks as if the Z-Order changes so that the docking screws up, but after looking at the Document Outline, it is all still fine. The ToolStrip just seems to disappear from view completely. I have no idea where it went.Then, when I select the ToolStrip in the Component bar (what is that called? where you can see the control icons only for controls such as Dialogs etc), it suddenly pops up again, in the right place! And the ListView scales down a bit so everything is correct once again...
As soon as I select another control, the Listview jumps back up and the Toolstrip disappears again...At first I thought well, not really a problem since I can just select the ToolStrip from the component bar... Nope... It seems that the ToolStrip is also hidden during I thought it was just a one-off bug and deleted the whole SplitContainer to build it up again. Five minutes later, it happened again.I decided to throw away to complete project and go back to a slightly older version (with the Buttons instead of the ToolStrip) and try it again.Nope, same problem! I have tried to reproduce the bug in a clean project, but no luck...
This is the first time i am using ToolSTrip in VB.NET. I have set some navigation buttons like First, Prev, Next and Last. i have set Image property in buttons. but at runtime these buttons are not visible, i can not see any button, even if i set Display Style property to ImageandText, the Image is not displayed but text is visible.
I would like my ToolStrip button to actually look like a button instead of this flat thing that is the default. I would also like for it to depress when the user clicks on it, just like a standard Windows form button. I've spend a couple of hours searching
I created a toolstrip with some buttons. I have a form with some objects (like textbox,checkbox,button etc.) and when i get the focus on last item,when i finish to compile i need with tab on keyboard to get focus on save button on the toolstrip.
I want to select a button("Exit") on the ToolStrip after pressing a button ("ButtonFocus To Exit") outside the toolstrip. I used ExitToolStripButton.Select() on ButtonFocusToExit.Click but which seems like its selecting the button ("Exit") but when i pressed enter it never execute the code in "ExitToolStripButton_Click" .
So the button is still not active. Can anyone have fix to it?
Im using buttons from A to Z in a toolstrip which I need to capture the text property of the button which trigger click event. I do it this way which took a long coding to mention all buttons (A-Z) click events.
vb Private Sub az_btn(ByVal sender As Object, ByVal e As System.EventArgs) Handles A_ToolStripButton.Click, B_ToolStripButton.Click ... Z_ToolStripButton.Click 'shows text property of the clicked button MessageBox.Show(sender.ToString) End Sub
how i can make a button (UpdateBtn) in my toolstrip Act like a NotifyIcon so i can use the BalloonTip features i have looked on goggle all over and cant find a single thing about it (unless im looking for the wrong thing) im thinking it either cant be done or no one has bloged about it yet
In wndProc method WM_MOUSEACTIVATE is not working. When I click on Toolstrip button m.Msg is not returning the value 33 and m.Result is not returning value 2. know how to handle the WM_MOUSEACTIVATE
I really want to make use of the toolstrip and databinding but these two technologies keep conflicting with each other. I think the root cause is something to with the fact that the toolstrip buttons don't recieve focus in the normal way.
I invite you to try the following:-
1. Create a form and put some text boxes a tool strip with a save button on it.
2. Write a query or sproc to get a datatable back and bind your text boxes to the field in the datatable.
3. In the code behind your Save ToolStripButton put some code that makes an arbitrary change to a field on the dataset (it doesn't matter whther this field is bound to a text box or not). eg:- m_DataTable.Rows(0).Item("CommissionRatePerc") = "0.0000"
4. Put a breakpoint in the save and run the form.
5. Make some changes in the text boxes. Do not leave the last text box but rather click save while a text box whose contents you have edited still has focus.
6. When your code hits the breakpoint, query the value of the data table field that is bound to the text box you were editing when you clicked save - it will still contain the unedited value. Unless you do something about it that unedited value is going to get saved back to your DB.
We did get around this problem by explicetely setting the focus to another control on the form before saving. That worked most of the time because it prompts the text box to flush it's value back to the datatable (nb EndEdit does not work, although you'd have expected it to). However, and this is the reason I suggested you add a line of code that changed a value in the underlying datatable in step 3, if you change a value in code in this way before the value from the text box get's flushed back then it doesn't seem to matter what you do, the user's current edit is simply lost. They will still show in the text box, though, leading your user to believe that the change has been committed when it hasn't. Our final solution is that we never ever change a value in the adtaset in the code behind our toolstrip buttons. That's working but it's a pretty big restriction.
i am creating a table in vb.net code (htmltable) with htmltablerows and htmltablecell. I gave on image control but thatr control cant have the .imageurl property, which i need cause i have a handler image.ashx which brings image from the database. heres' the code -
TD = New HtmlTableCell Dim img As New HtmlImage() img.ID = "image_" & rd("ID")
[code]....
on the last line, "img.ImageUrl" i get this error -'ImageUrl' is not a member of 'System.Web.UI.HtmlControls.HtmlImage'how do i fix this?
I'm trying to update pictures boxes with images of controls stored in an imagelist owned by a control. The images stored in the control.imagelist do not showup in the picturebox. I'm working on simplifying the code to post, but for now could use help.If I store the image in a member variable owned bythe control it woks fine.Something to do with persistance of images in control owned imagelist? [code]
I have a Main form, called Main.vb, that is a Parent Form. I have another form called Notes.vb. Inside Main.vb I have a toolstrip with a button on it called Notes. I'm wanting to change the checked status of the Button to either True when the Notes.vb window is open inside the parent or to false when it is close. Is this possible?
i m working on a payroll software, and for user facility i want to provide calculator and Microsoft excel file with our module, so there is no need to explciltly open the calculator,,whenever it is required,,,,,i want the code that provide me calculator by clicking a tool strip button on mdiform?
i have a textbox and a button on tool strip. i wan to set focus on the button when user enters data in textbox. after enter key is pressed it shoul focus on the button.
I want to be able to click on one toolstrip button and hide it while making another visible.I tried the .show and .hide expressions but they come up with an error.
I have a favorites bar in my web browser and when I display them on a toolstrip as a toolstripbutton but the bookmarks are stored as a string collection in my.settings and It only displays the url of the bookmark (not the document title of the site)Is there a way to have a toolstripbutton that has the text of the Document Title of the url and the url as the tag of the toolstrip button?
Can anyone help me to make a program which include a Button shows the current Month and the year and when clicking the button it shows a DialogBox ith a MonthCalender (this one I have done - the Monthcalender shown on a Dialogbox).Further I want to change the month shown as a Text of the Button when I click other Buttons to make the calender to go backwards or forwards,
Another thing I want to know is how to make the TreeView which expand / reveal another line or something on clicking the "Plus".I am learning only VB 2005 / VB 2008, please give the codes etc for VB 2005 only.
BTW, Can you tell me how to paste a picture in this writing place? I tried to paste the picture to shoow what exactly I want to do, but I couldn't do it.
I have entered an image in sql server database successfully. Now i want to retrieve this image from database and show it in an Image control. I don't want to put any ListBoxes on the page. I wrote in ASP dot Net..
Dim MS As MemoryStream Dim IMG As System.Drawing.Image Dim FS As FileStream
I usually use standard button and do the settings like causevalidation etc if required.
i decided to use toolstrip and inserted some buttons but end up that it doesn't do the validation for control and also doesn't call leave event of textbox control.
so my question is, anyway to use regular button functionality for toolstripbutton or there is a way to add regular button on toolstrip.
