In Mastering VB2010 on arrays, a command is show indicating the reversed contents of an array can be assigned to another array.
ReversedArray = System.Array.Reverse(ArrayName)
I can't get this to work and part of the problem is how to set up (dim) the ReversedArray. When I enter this I get a squiggly line under the right side of the equation and an error message saying no data is produced by the expression.
I get the same error with a copy command:
CopiedName = System.Array.Copy(Name, CopiedName, 10)
How do I set up working code to reverse or copy the contents of an array?
i have an array of booleans whose current boolean values I want to preserve but add additional length to the array? How can I achieve that? My code looks like this:
Dim Array() As Boolean Dim ArrayInterimShort() As Boolean ReDim Array(119)
I am trying to create a code where I placed sets of numbers in an array.I'll use a masktextbox to have the user enter the numbers to match what's in the array. If the user enters the number, ex: social, and the data is correct (matches the numbers in the array), something happens if the number entered in the masktextbox does not match any of the number sets in an array then another thing happens.The masktextbox so far only validates format and gets number only, however, I want the number entered to match whats in the array.
I use a VARBINARY(MAX) column, because I have no idea what is going to be put into it. All I know is that as of this point in time, the data will be one of many traditional data types(Integer, String, DateTime, etc.)I also have another column that is meant to indicate the DataType so the .NET application can handle the data and validate input accordingly.Right now, for testing, I have a DataType table in my database that stores the "supported" datatypes for the VARBINARY column, and a foreign key linking to the column meant to indicate the DataType. This works perfectly, but it feels akward.
The following code produces a sound that's like a tone or a soft bell, indicating that an action has completed successfully: System.Media.SystemSounds.Beep.Play() Any code for the opposite? You know like if you tried to do something in Windows that was invalid. Is there some kind of default sound indicating an error that I can invoke on a Windows computer in VB.Net similar to the one above only discordant?
I am trying to use a class that I created. However, I get an error indicating the class name or rather "contactClass is ambiguous. How do I correct this?The following error of code:
Public newcontactClass As New contactClass Recency
WRITE A PROGRAM THAT TAKES AN INTEGER VALUE AND RETURNS WITH ITS DIGITS REVERSED.. ex. input 7631 output: 1367POSITIVE NUMBER ONLY...Could you guys give me a hint on what i'm supposed to do here?
Am learning arrays at the moment and I have the below piece of code that goes through drive C: and displays the files in in a list box.
I want to try and expand it to use array.sort so that it gets the files, puts them into an array, and then I can sort by filename or file size. I have been rattling my brain over this - as to how do I put the files into an array.
Would like an explanation if possible as more interested in learning it rather than the answer.
Private Sub btnclick_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnclick.Click Call Clearlist()
Im working a lot with normal strings and during my development process strings with lengts of 10.000+ characters are being processes which makes it a my application run slower.Is it possible to shorten the length of any of string, in a way in which it also can be reversed?
I am having a hard time displaying the contents of a text file that i read into an array. I read the text of the text file into an array but then i need to display it but i can't seem to get it. I also need to create a criteria to match whatever letter is entered into the textbox and display the contents of the file only beginning with that letter. I know i have to use a substring to read only the first letter but I can't even display the contents of the file from out of the array. Here is what i have so far.
Dim sr As IO.StreamReader = IO.File.OpenText("CRAYONS.TXT") Dim color(50) As String Dim arrynum As Integer
I've got an array of type double with about 30 entries(numbers) in it.I need to multiply them all together. Sort of like "=product(A1:A30)" in Excel (formula).
I'm a sorta newcomer to visual basic and programming in general and I'm having a hell of a time trying to figure out how to put a listbox into an array. And just so we don't make any assumptions yes this is for school and no I'm not looking for anyone to do my homework for me. I just need some direction on how to do this step so I can make progress.
Anyway, the program is a data of students and I gotta do the code for alphabetically sorting by last name in ascending and descending order. I have to make it so whenever the A-Z button is pressed it will sort whatever is in the listbox, be it 1 record or all.[code]...
Am learning arrays at the moment and I have the below piece of code that goes through drive C: and displays the files in in a list box.
I want to try and expand it to use array.sort so that it gets the files, puts them into an array, and then I can sort by filename or file size. I have been rattling my brain over this - as to how do I put the files into an array.
Private Sub btnclick_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnclick.Click Call Clearlist()
I have a need to verify SSN's that are entered based on a reserved range (these are used for advertising and will never become valid). The input is from a masked text box formatted as 000-00-0000. I may be wrong, but I figured the most logical method would be to remove the hyphens and convert the string to an integer, then compare the starting point and end point of the range.
'Valid SSNs 'Currently, a valid SSN cannot have an area number between 734 and 749, or above 772, the highest area number which the Social Security Administration has allocated. This should not be confused with Tax Identification Numbers which include additional area numbers. [Code] .....
how to use DrawString (or any other method) to draw text that's reversed? For example, instead of having black text over a background image, you draw a black filled rectangle over the image, and then use DrawString to "punch through" the black rectangle exposing the image underneath.
I discovered that java uses a reversed way of storing data. For example, the integer value 2 has the following byte values:
In "Windows" format: [2] [0] [0] [0] In "Java" format: [0] [0] [0] [2]
The binary readers of both languages seem to use the same different format. Now my question: What is the easiest way to read binary values (Integer, Single, etc.) in VB .NET from a java formatted file? I already made functions like these:
I've created a program that allows a user to input numbers and then outputs the highest and lowest number when the user is done (the user indicates this by using a sentinel value of -99). My only problem is that it keeps putting out the numbers reversed (largest as smallest and vice versa).
The code is below. Module Module1 Sub Main() 'Declare Variables Dim number, smallestNumber, largestNumber As Integer 'Get numbers from user [Code] .....
Is it a no-no to have a module within a module like I do there? So far there is no mention of such in the book but I can't find an example of it happening yet either? The instructor wants modules to perform the input and return of information and the only way I could figure out it doing both of those things (rather than using the main module for user input) was to call the module that figures hi/lo within the module that asks for the numbers. I'm really unsure on this part.
I'm working on a program that has to get a set of images and then scan them to find pixels that match colors in an color array. Anyway I think I got everything working but how to load the images in as bitmaps. See the images are dynamic, they change there filenames so I can't call them with a static call like Dim bmp2 As New Bitmap("c:button.gif").
So I am using a loop to feed the images into an array for bitmap but thats not working, anyway that I can do this as, right now the program gets all the filenames for the images from a text file that is sent in to us. All I need to do is have the program check each image for pixels that match our color list. But I cant get the images into the bitmap array.
I am having a hell of a time figuring out where I am going wrong in copying the contents of arrays to listboxes.
I am using textboxes to input team numbers and team names.
The code for that is as follows (used in a button after the data has been entered in the text boxes:
Teamname, Teamnumber and numteams have been previously declared as public variables (string,integer and integer) in a module as they are used throughout the project. Numteams has had a value ascribed to it in a previous form
ReDim Teamname(Numteams) ReDim Teamnumber(Numteams) Dim thisteam As Integer
[Code]....
I have had to put in the "" for the Teamname variable as otherwise I was getting an error saying "Value cannot be null". I am also not sure what is causing that.
When I do that, I get 0 in the listboxes for all the teamnumbers except the last one which is right and blank strings for the team names except for the last one which is also right.
I have an array of info with each element containing a structured variable. Once the array is full of info it is passed to a procedure "DisplayStructure" which I'm trying to get display a MessageBox with the info in it, separating each element on a separate line. I can't get it to display even one element on one line. The structure is called Employee and what comes up in the MessageBox is Employee.Example or Example.Employee, can't remember which.[code]...
in VB 2010 how do I display the contents of a 2 dimensiomal array. As a VB6'er, I miss the flex grid control and I can't seem to adapt to the Data Grid view for displaying array data.
I'm trying to teach myself arrays as I have not extensively worked them. So I thought of a basic program to hash the contents of an array and list the output of the array word next to the hash value of it.
I have this: Dim split As String() = temp_string.Split(",") ''#feed all info into global variables patient_id = split(0) doc_name = split(1) lot__no = split(2) patient_name = split(3) How do I clear all the contents of split() ?
I have a 1-dimensional array that is essentially is written to a csv file. My problem is that after I have loaded the entire array...I wish to write it to the csv file and I'm not sure how to set it up.[code]...
I have developed a vb.net dll (.net 3.5) which does the following : - I have data of several stock market companies. - They are stored in several folders under a main folder. - These files are random access files. - There can be around 4000 files in total for example.
I wrote a program which reads a current csv file and stores contents in array. Then I store name and path of companies in folders (which I was talking about). Then I match one company from csv (stored in array) to companies in user's folder (again reading from array). If found I insert data in the file (random access file). This whole process takes for eg. 2 min my system. A similar program was written years ago by someone in powerbasic which takes slight less time if run one but if run for multiple csv files it takes only a few seconds doing the same thing for other files. When I do the same thing (by writing code to .net dll) and making a dummy app to run it, no matter how many times I run it takes same time. And is way slower than the earlier one (PB) one I was talking about. But if I paste the same code in my win (.net) app and not use .net dll then it runs a bit faster.
I need to show status so if I pass my form's label reference to .net dll and it updates it does that slow down process a lot. As I mentioned I am trying to process the files and it takes longer in .net. What should I do to get best performance? Unfortunately due to unexplainable reasons I cannot change the format or use a db. The files which I am reading/writing (random access files) are use by other products so I have to stick to that format. What I am doing is storing the location of those files in array so that I don't have to search folder again. that is not taking time. But opening reading and writing files is time consuming if I am doing it for few thousand of them. A similar program in powerbasic (developed years ago) runs fast. Running code thru .net dll is slower than running it thru program. Why?
