I have a need to verify SSN's that are entered based on a reserved range (these are used for advertising and will never become valid). The input is from a masked text box formatted as 000-00-0000. I may be wrong, but I figured the most logical method would be to remove the hyphens and convert the string to an integer, then compare the starting point and end point of the range.
'Valid SSNs
'Currently, a valid SSN cannot have an area number between 734 and 749, or above 772, the highest area number which the Social Security Administration has allocated. This should not be confused with Tax Identification Numbers which include additional area numbers.
[Code] .....
Haveing troubles with an assignment. I am writting code that will allow user to enter a score and the program returns a grade based on the score entered. I can get it to work using "IF" statements but want to use code for ranges. My "IF" code is as follows.......
Ex. the month of April, the number of days is only 1 to 30. What if the user will enter the date range of 4/1/2011 to 4/31/2011 in the mask textbox? I am using Mask textbox because datetimepicker will not accept empty value and it cannot be empty either.
I'm asking this because I encountered an error when querying in MS SQL SERVER 2005. It says "The conversion of char data type to smalldatetime data type resulted to in an out-of-range smalldatetime value." I thought it was the casting or conversion problem. I've observed the SQL when transacting and I found no difference with my code.
So then, I just figured it out that my date exceeded the number of days of the April month.
Imports System.Math Public Class Form1 Dim var_ghost As Object Dim var_number As Double Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load [Code] .....
My question is; when you enter a variable to inputbox like "100.5" it shall return a numeric value at line1 and "100,5" too. But when I need to check for entered value is a real number or not (Look line2) CDbl("100.5") returns 1005 CDbl("100,5") returns 100,5.
I am trying to make a Windows Form in VS 2010 that is used to determine whether someone is entitled to a prize/medal/award whatever you want to call it. So basically if someone clicks on a check box to say they attended an event and they enter a date range between saying they attended the event between 01/01/2010 - 01/02/2010 and the requirement for the award is that they attended the event for more than 20 days then because the statement is true I would want a box to pop up and say person is entitled to receive a particular award. There are multiple awards available based on different conditions so to be eligible for so the result would be dependent upon which boxes and date ranges are selected.So For Award1 the logical argument is something along the lines of
IF Event1CheckBox = Checked AND Attendance => 20 Result = Entitled to Receive Award1 Else = Not Entitled To Receive Award1
I have 14 values, that change constantly. I need to know how to check each value against each other to see if they are within 250 of each other. [code] I want these two values in the listbox to blink red in the list box. but i always want each value to check every value in the list box. i dont even know where to start short of programming each possibilty with a if than statement and that would take forever
I had created login form in vb.net. There are two fields username & password. I want to check username & password enter in the login form, from the first.mdf (database file). If it is correct then message is displayed. I had written code for this but I got error in the code.
The code of login form is below: Imports System.Data.SqlClient Imports System.Data.SqlClient.SqlConnection Imports System.Data.SqlClient.SqlCommand Public Class Login Inherits System.Windows.Forms.Form [Code] .....
I want to check at client end whether the entered date in text box is future date. I mean this textbox should allow future date only. code the above problem using jquery or vb.net
I have the following error for every cell: "the number in this cell is formatted as text or preceded by an apostrophe" To duplicate the error: I have to store this results that come from a Web services as strings array: Sample: (3 by 3 array)
I have over 4,000 xml files that needs to be converted in to a character based on a value and entered in to a rich text box. It will do this, until it runs out of files to read. I have tried "try" statements, "if" statements...
I have a UI that uses datagridviews / bindingsource / datatables of typed dataset for data entry. The dataset itself is serialized to a varbinary(max) in SQL. (i.e. no tableadapter, backend schema).I would like to limit the number of rows the user can enter into some of the grids (the data is used to fill PDF forms and I don't want them entering more rows than the forms can accomodate.).I have subclassed the datagridview, added a rowlimit property and tried to manipulate the AllUsertoAddRows property
Imports System.Windows.Forms Public Class dgv Inherits System.Windows.Forms.DataGridView[code]......
The behavior I see is that the messagebox comes up after leaving the max row even when the user is trying to leave the grid. I can lose the messagebox and deal with notification some other way but I thought someone else may have come up with something a little more sophisticated to handle simply causing attempting to add to many records to navigate out of the grid to the next UI control.
Have a column of dates which i need to compare to a specific time of the year, which establishes what calculation needs to be applyed then depending on the outcome apply conditional formating to highlight an adjcent cell, but need to remove the YY element as the contents spans multiple years.
if the date in A1 is between 1st Jan & 14th Mar use -8 if the date in A1 is between 15th Mar & 15th Oct use -17 if the date in A1 is between 16th Oct & 31st Dec use -8
Then deduct the above value from B1 to give a target for each row (from 3 onwards)if the target is < the value in n then change background orange in f
I am coding a lottery number generator for a homework assignment. My project needs to have functions that return random values based on a range given. The first function I am coding is for a pick 3 lottery game.The function should return three random numbers between 1 and 9. I have coded the function but it only returns one number. When the debugger runs it says my function does not return a value on all codepaths.
I want a textbox to have autocomplete. I want the completion to be based off of text that has been previously entered into the textbox. My method of saving seems to work but when i close the program and re run it the autocomplete suggestions arent there anymore.
I have an MSAccess 2007 DB to record our employees Personal Days Off (PDO). Until now I have only had a form to record each single day taken. This results in time consuming repetitive entry when an employee takes multiple consecutive days or weeks off.
My database consists of two tables:tbl_PDO (to hold the Worker, DateTakenOff and TimeTaken) tbl_Employees (containing the Employees contact info, Name, Address, etc.) A form for Single date data entry with tbl_PDO as the record source and the following fields: (This is the original entry method one day at a time and works as it should)cboWorker(with Record Source tbl_Employee[Worker] DateTakenOff(ShortDate) TimeTaken (in hours) A form for Date Range entry with tbl_PDO as the recored source and the following fields: cboWorker(with Record Source tbl_Employee[Worker] StartDate EndDate TimeTaken (in hours) I have been trying to work with bits and pieces of code Ive found online to create multiple rows in a table based on a date range.[code]...
We have a Try/Catch block of code in our web application to trap a certain exception. What we want to do with this exception depends on the current time. If it is between 4:30PM and 3:00AM we will want to send an email, otherwise we will throw the exception.
Try 'Yada Catch ex as WebException Dim Time As DateTime = DateTime.Now
Here is the problem, I have an Access form and a textbox for an e-mail address. The email address is not required, I only want to check for a valid email address when a value or address has been entered into the e-mail filed. Example: If e-mail is not empty or if email field has a value, then check for the follow elements, matched the email address with the required format. If the e-mail field is empty, do not look for anything, move on.
I'm looking for a library for Autocomplete support in text controls which remembers all previous entries of the user and provide auto-complete support for it.For example for "recent files" I use [URL] and it works great. Do you know something like that for this purpose?
UPDATE : This is a .NET Winforms application and I'm using normal Text Control.
When user stores a record, I need to make sure dates don't overlap.My simple code checks date ranges within a specific record (e.g. user enters 9/16/2011 or 10/21/2011, I throw an exception.)But, on the slim chance a user gets creative (e.g. 10/14/2011 - 10/23/2011 or even 10/14/2011 to 11/16/2011), now they have circumvented my check.BTW, the user could enter 10/14/2011 to 10/23/2011 if they were editing the record that contained values 10/15/2011 - 10/22/2011.So, I'm trying to solve this riddle with a linq query. However, what I have isn't working exactly right.
UPDATE Nevermind about code not working. While trying to provide an example to expand on Miika's repsonse, I found my answer. So, giving credit to Miika for pointing me in the right direction and posting my working code below:
Here's my code:
Private Sub CheckForOverlap(myMonth As Messages.MyMonth) Dim am As New MyMonth() Dim amCollection As Messages.MyMonthCollection
Haveing troubles with an assignment. I am writting code that will allow user to enter a score and the program returns a grade based on the score entered. I can get it to work using "IF" statements but want to use code for ranges. My "IF" code is as follows.......
Would it be possible to search a table, confining to a specific date range based on a date-time column, and get a count of the 10 most used words in a particular var-char column excluding a list of words?All in SQL?Currently I am pulling out the records that match and sorting through the contents outside of SQL, I would think where I can do it directly on the server it would be more efficient.(SQL 2008)
WRITE A PROGRAM THAT TAKES AN INTEGER VALUE AND RETURNS WITH ITS DIGITS REVERSED.. ex. input 7631 output: 1367POSITIVE NUMBER ONLY...Could you guys give me a hint on what i'm supposed to do here?
In Mastering VB2010 on arrays, a command is show indicating the reversed contents of an array can be assigned to another array. ReversedArray = System.Array.Reverse(ArrayName)
I can't get this to work and part of the problem is how to set up (dim) the ReversedArray. When I enter this I get a squiggly line under the right side of the equation and an error message saying no data is produced by the expression.
I get the same error with a copy command: CopiedName = System.Array.Copy(Name, CopiedName, 10) How do I set up working code to reverse or copy the contents of an array?
Im working a lot with normal strings and during my development process strings with lengts of 10.000+ characters are being processes which makes it a my application run slower.Is it possible to shorten the length of any of string, in a way in which it also can be reversed?
how to use DrawString (or any other method) to draw text that's reversed? For example, instead of having black text over a background image, you draw a black filled rectangle over the image, and then use DrawString to "punch through" the black rectangle exposing the image underneath.
I discovered that java uses a reversed way of storing data. For example, the integer value 2 has the following byte values:
In "Windows" format: [2] [0] [0] [0] In "Java" format: [0] [0] [0] [2]
The binary readers of both languages seem to use the same different format. Now my question: What is the easiest way to read binary values (Integer, Single, etc.) in VB .NET from a java formatted file? I already made functions like these:
I've created a program that allows a user to input numbers and then outputs the highest and lowest number when the user is done (the user indicates this by using a sentinel value of -99). My only problem is that it keeps putting out the numbers reversed (largest as smallest and vice versa).
The code is below. Module Module1 Sub Main() 'Declare Variables Dim number, smallestNumber, largestNumber As Integer 'Get numbers from user [Code] .....
Is it a no-no to have a module within a module like I do there? So far there is no mention of such in the book but I can't find an example of it happening yet either? The instructor wants modules to perform the input and return of information and the only way I could figure out it doing both of those things (rather than using the main module for user input) was to call the module that figures hi/lo within the module that asks for the numbers. I'm really unsure on this part.
I am creating a Calender application using the monthly calender control.I am trying to implement a search for the calendar so a date can be entered into a text box which intern moves the calender to show the date entered. I have been try to figure this out with no luck, is it even possible to do?