Get If The Date Entered Is In The Right Range
Feb 1, 2011
How to get if the date entered is in the range?
Ex. the month of April, the number of days is only 1 to 30. What if the user will enter the date range of 4/1/2011 to 4/31/2011 in the mask textbox? I am using Mask textbox because datetimepicker will not accept empty value and it cannot be empty either.
I'm asking this because I encountered an error when querying in MS SQL SERVER 2005. It says "The conversion of char data type to smalldatetime data type resulted to in an out-of-range smalldatetime value." I thought it was the casting or conversion problem. I've observed the SQL when transacting and I found no difference with my code.
So then, I just figured it out that my date exceeded the number of days of the April month.
View 14 Replies
ADVERTISEMENT
Jun 3, 2012
I am trying to make a Windows Form in VS 2010 that is used to determine whether someone is entitled to a prize/medal/award whatever you want to call it. So basically if someone clicks on a check box to say they attended an event and they enter a date range between saying they attended the event between 01/01/2010 - 01/02/2010 and the requirement for the award is that they attended the event for more than 20 days then because the statement is true I would want a box to pop up and say person is entitled to receive a particular award. There are multiple awards available based on different conditions so to be eligible for so the result would be dependent upon which boxes and date ranges are selected.So For Award1 the logical argument is something along the lines of
IF Event1CheckBox = Checked AND
Attendance => 20
Result = Entitled to Receive Award1 Else = Not Entitled To Receive Award1
[code].....
View 1 Replies
Oct 4, 2011
I am creating a Calender application using the monthly calender control.I am trying to implement a search for the calendar so a date can be entered into a text box which intern moves the calender to show the date entered. I have been try to figure this out with no luck, is it even possible to do?
View 2 Replies
Jan 13, 2009
I have a need to verify SSN's that are entered based on a reserved range (these are used for advertising and will never become valid). The input is from a masked text box formatted as 000-00-0000. I may be wrong, but I figured the most logical method would be to remove the hyphens and convert the string to an integer, then compare the starting point and end point of the range.
'Valid SSNs
'Currently, a valid SSN cannot have an area number between 734 and 749, or above 772, the highest area number which the Social Security Administration has allocated. This should not be confused with Tax Identification Numbers which include additional area numbers.
[Code] .....
View 4 Replies
May 13, 2010
I have an access form that shows a data table. when the form is opened, I want to filter the data in the date column to show only the records that don't have a date entered into the field.
View 8 Replies
Feb 22, 2010
I am trying to get my program to validate the hexadecimal range entered by the user, the range being between 00 - FF,
View 17 Replies
Jun 6, 2011
I need to compare the date that is entered with today's date minus some number of work days.
I used dateinterval.day, but that is the actual day, not the work day. i don't see a "simple" way to get work days.
For example, my number is 3, so i want 3 work days (M-F) not 3 days.
View 3 Replies
Apr 12, 2012
I'm working in visual studio 2005 and developing a windows form that has a datagridview on it.
One of the cells is a Calendar Column type (custom made). I pulled the code for it off the internet - it basically allows the user to select the date from a small calendar.
When the date is changed, it gets the correct value and it also saves into the database with the correct value.
The problem is that it doesn't load onto the grid with the correct value. In fact, no matter what date I enter in, it always displays it as 1 day earlier. e.g. If I saved it to the database as 4/19/2012, it displays it as 4/18/2012.
I verified that there's no other column in the query that retrieves the data for the grid that contains the value it's displaying.
View 23 Replies
Jun 21, 2010
What I am trying to create is a log in system, and in one of my forms I want to limit the date entered into a form. For example a user cannot enter a date more than seven days from todays date Which is what i achieved but what i am stuck on is preventing a user entering a date in the future
[Code]...
View 5 Replies
Jul 14, 2009
Would it be possible to search a table, confining to a specific date range based on a date-time column, and get a count of the 10 most used words in a particular var-char column excluding a list of words?All in SQL?Currently I am pulling out the records that match and sorting through the contents outside of SQL, I would think where I can do it directly on the server it would be more efficient.(SQL 2008)
View 4 Replies
Nov 7, 2011
I have several records in a database that have Start and End Dates
09/15/2011 - 09/30/2011
10/15/2011 - 10/22/2011
11/01/2011 - 11/15/2011
When user stores a record, I need to make sure dates don't overlap.My simple code checks date ranges within a specific record (e.g. user enters 9/16/2011 or 10/21/2011, I throw an exception.)But, on the slim chance a user gets creative (e.g. 10/14/2011 - 10/23/2011 or even 10/14/2011 to 11/16/2011), now they have circumvented my check.BTW, the user could enter 10/14/2011 to 10/23/2011 if they were editing the record that contained values 10/15/2011 - 10/22/2011.So, I'm trying to solve this riddle with a linq query. However, what I have isn't working exactly right.
UPDATE Nevermind about code not working. While trying to provide an example to expand on Miika's repsonse, I found my answer. So, giving credit to Miika for pointing me in the right direction and posting my working code below:
Here's my code:
Private Sub CheckForOverlap(myMonth As Messages.MyMonth)
Dim am As New MyMonth()
Dim amCollection As Messages.MyMonthCollection
[code]....
View 1 Replies
Dec 1, 2011
I am trying to get a list of dates from a provided StartDate and EndDate in my database, and use these dates to link to dates in a database (to display another variable on the y-axis of the chart) and to populate the x-axis of a chart (with the list of dates). Is it possible to get a list of dates in VB and pass them into a chart this way?
View 2 Replies
Aug 15, 2011
i just want to ask how can i populate a listview n vb.net that has a is limited by a date from and date to.i have a datetimepicker for start date and datetimepicker for end date and i want do list all the entry of my database in listview that is within the range of the start date and end date.
View 5 Replies
Apr 14, 2012
Haveing troubles with an assignment. I am writting code that will allow user to enter a score and the program returns a grade based on the score entered. I can get it to work using "IF" statements but want to use code for ranges. My "IF" code is as follows.......
[Code]....
View 2 Replies
Jun 23, 2010
I have following code and I can filter data on grid but when I pick same date in 2 datepicker it shows nothing.
[Code]...
View 9 Replies
Apr 29, 2011
I have a textbox where a user is supposed to enter a date. How can I check whether the entered date is in the correct date format?
Like this: 02/02/2008
not like this 022/22/-1
not like this 2009/02/02
not like this 02/Jun/2015
not like this 02/abc/2010
(I don't want to use DateTimePicker or MonthCalender).
EDIT 1 I tried it like this
Private Sub txtHireDate_Validated(ByVal sender As Object, ByVal e As System.EventArgs) Handles txtHireDate.Validated
Dim dateString As String = txtHireDate.Text
Dim formats As String = "MM/dd/yyyy"
[code]....
But its showing some errors?
View 2 Replies
Jan 16, 2009
Can somebody show me how to loop through days between two DateTimes in VB?
View 3 Replies
Jun 9, 2011
i am having problems getting my calendar to work, passing a start and end date for a rental car and displaying on the form the number of days chosen and the amount for the total. This is the first form problem I have done. I cannot see what I am doing wrong. It does not figure number of days and the amount just stays zero.
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
[code].....
View 3 Replies
Jun 23, 2010
I have following code and I can filter data on grid but when I pick same date in 2 datepicker it shows nothing. How can I fix the problem.
[Code]...
View 6 Replies
Jun 9, 2011
I have two DateTimePickers controls.I am wanting to loop from one date to the other, displaying the date in a msgbox.[code]
View 4 Replies
Jun 8, 2011
I have a datagrid view with some data in it. The first column (0) is called 'Date' and contains the dates I want to work with.What I would like is to be able to filter (only display) the data between a date range selected by the user using 'Datetimepicker1' and 'Datetimepicker2'
This is the code I have. its not right of course, but it may help explain what I'm trying to achieve, I wonder if someone could give me a pointer?
[Code]...
View 4 Replies
Sep 16, 2009
i dun know wats wrong wit my code.....i would like to search the date which located between 2 date time picker and make it goes into print preview.
Dim CustomerFound As Boolean = False
Dim daterange As String
daterange = "[Date of Booking] >=#" & Datetimepicker1.Text & "# AND [Date of Booking] <=#" &
[code]......
View 4 Replies
Jan 27, 2009
I would like to select transaction id based from its creation date. All transactions are displayed on form load event on a datagrid. The select function should be executed on 2 datetimepicker (the first should be the start date, the last should be the end date).So there are three controls on a form, 2 datetimepicker and a datagrid. I managed to load all transactions into a datagrid, and managed to select/filter those transaction based on id, but not date.the table is called 'transaction_details', it contains 'transaction_id', 'transaction_date', and few other columns. transaction_id is the primary key.
View 2 Replies
Jan 5, 2011
I am trying to bind an Access database to a MSChart control in VB Net 2008. I have a test database populated with four fields SAMPLE-DateTime, Values-Number, MAX-Number and MIN-Number. I'd like to only display the rows that fall within a specific date range but I'm running into a problem when i try to execute the following command:
cmd = "SELECT SAMPLE,VALUES,MAX,MIN FROM TABLE1 WHERE [CHECK_DATE] BETWEEN 01/01/2009 AND 01/01/2011"
View 7 Replies
May 1, 2011
code CrystalReport by two DateTimePicker but get error "Mismatched data types in criteria expression"
This is the code
Private Sub btfechascrystal_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btfechascrystal.Click
[code].....
View 2 Replies
May 22, 2010
I'm wanting to loop through a range of dates set by date time picker. This is my code and as the SD.Value.Date is 23/05/2010 it shows Sunday for me. However on the Loop it keeps showing Sunday and Never stops.
Dim SD As Date = StartSearchDate.Value.Date
Dim ED As Date = EndSearchDate.Value.Date
Do While SD.Date <= ED.Date
MsgBox(SD.DayOfWeek.ToString)
SD.Date.AddDays(1)
Loop
View 3 Replies
Aug 31, 2009
I have below code in vb.net.
[Code]...
I want to check at client end whether the entered date in text box is future date. I mean this textbox should allow future date only. code the above problem using jquery or vb.net
View 1 Replies
Mar 30, 2011
Have a column of dates which i need to compare to a specific time of the year, which establishes what calculation needs to be applyed then depending on the outcome apply conditional formating to highlight an adjcent cell, but need to remove the YY element as the contents spans multiple years.
if the date in A1 is between 1st Jan & 14th Mar use -8
if the date in A1 is between 15th Mar & 15th Oct use -17
if the date in A1 is between 16th Oct & 31st Dec use -8
Then deduct the above value from B1 to give a target for each row (from 3 onwards)if the target is < the value in n then change background orange in f
View 1 Replies
Feb 15, 2012
I have a calender which highlights the selected date from the database. It currently highlights the start date only...I would like it to highlight the range of dates (start date - send date)[code]I think the query and where statement used is not pulling through the correct information but not entirely sure where or how to correct it ...
View 1 Replies
Feb 15, 2011
I have to display all days base on a date range. For example my date range is "January 1, 2011" to "February 28, 2011". Now what i want is to display all the dates base on that range, what i meant about "display the dates" is like this.
January 1,2011
January 2,2011
January 3,2011
[Code]....
View 3 Replies
