I am trying to bind an Access database to a MSChart control in VB Net 2008. I have a test database populated with four fields SAMPLE-DateTime, Values-Number, MAX-Number and MIN-Number. I'd like to only display the rows that fall within a specific date range but I'm running into a problem when i try to execute the following command:
cmd = "SELECT SAMPLE,VALUES,MAX,MIN FROM TABLE1 WHERE [CHECK_DATE] BETWEEN 01/01/2009 AND 01/01/2011"
I'm receiving an error when trying to query a range of dates from a MS SQL DB in MVC Entity Framework. Unable to cast the type 'System.Boolean' to type 'System.Data.SqlTypes.SqlBoolean'. LINQ to Entities only supports casting Entity Data Model primitive types. This is our query:
[Code]...
I have three tables,
Products(ProductID, ProductName)
Orders(OrderID, OrderDate)
OrderDetails(ProductID, OrderID) Junction table between Products and Orders.
For example, there are Three ProductID in Products table A01, A02, A03
Four OrderID in Orders table
1. 01/01/2009, 2. 03/01/2009, 3. 05/01/2009, 4. 07/01/2009.
OrderDetails data as below:
A01 -- 01/01/2009
A02 -- 01/01/2009
A01 -- 03/01/2009
[Code]....
then I want to display the date that A03 is not ordered from range 02/01/2009 till 08/01/2009 which could have the result like this.
DateMissingOrder for Product A03 in range of date 02/01/2009 to 08/01/2009:
03/01/2009
07/01/2009
How can I do this in LINQ to SQL Visual Basic?
I am getting the error:"Range variable 'sender' hides a variable in an enclosing block or a range variable previously defined in the query expression."for this
Imports System.Data.SqlClient
Imports System.Linq
Public Class Form1
[code]....
I can select any other item from the table without the error. "sender" has the same properties as "receiver" in the SQL table.
I want to retrieve query from MS.Access database criteria is between some date range,but I get the following error when execute my reader:Syntax error in date in query expression 'D_ate BETWEEN # @DateFrom # AND # @DateTo #'.
Dim StrSQL As String
StrSQL = "Select * from Pla_Comp Where D_ate BETWEEN # @DateFrom # AND # @DateTo #"
myCommand = New OleDbCommand(strSQL, conn)
[code]....
I am trying to bind an Access database to a MSChart control in VB Net 2008. I have a test database populated with four fields SAMPLE-DateTime, Values-Number, MAX-Number and MIN-Number. I'd like to only display the rows that fall within a specific date range but I'm running into a problem when i try to execute the following command:
[Code]...
In my fresh installation of Visual Studio Professional 2005 Visual Basic I have typed this code
dim olddate as date
olddate=datevalue("01-01-2006")
I receive an error: index out of range exception
On an other pc with the same fresh installation this do not happen. Why ? I have tried with other funtions : ctype, cdate but I receive the same error, while on an other pc this code is fine.
I'm having the following error message with a date value in production server. "The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value" In the development server the problem never happened. Both production and development servers have the same OS (Windows Server 2003), updates and settings including the regional settings options. The regional options is set to Arabic (Saudi Arabia) and the date is customized to use (English) gorgerin calendar. The non-Unicode is set to Arabic (Saudi Arabia).
My solution contains an ASP.NET web application and a class library. In my class library project I'm trying to get a list of rows from the database (SQL 2005) and I'm using a date rang [Code] Is there a way that I can use to manipulate dates regardless of the regional options settings?
I use the above code to restrict the user to enter the past date. but i am getting this error message
If NewBookingDataGridView.Item(3, 3).Value.ToString() < Now.Date.ToString() Then
MsgBox("you are trying to save records of past date.")
error is ** Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index**
i use a database in access and I use a query for adaptor and dataset.
The query is next:
Select * from table1, table2 where table1.idsomething=table2.id and table2.name= 'Name1' AND datebirth>=#07.25.1988# AND datebirth<=#07.31.1988# order by datebirth asc
The error is: Syntax error in date in query expression
In the database the format date is dd-mm-yy.Why I have this problem? What is wrong at the query?
I'm trying to run a query from a search form by date and I'm receiving the following error:[Teradata Database] Partial string matching requires character operands.The code for the search is:
ElseIf OptDate.Checked = True Then
sSQL &= "DATE_SUBMIT Like ('" & txtDateRec1.Text & "%')"
End If
[code] when i try to add date into db >> is showing me that error ( Syntax error (missing operator) in query expression '10/07/2011 07:45: )
View 9 RepliesWould it be possible to search a table, confining to a specific date range based on a date-time column, and get a count of the 10 most used words in a particular var-char column excluding a list of words?All in SQL?Currently I am pulling out the records that match and sorting through the contents outside of SQL, I would think where I can do it directly on the server it would be more efficient.(SQL 2008)
View 4 RepliesI have several records in a database that have Start and End Dates
09/15/2011 - 09/30/2011
10/15/2011 - 10/22/2011
11/01/2011 - 11/15/2011
When user stores a record, I need to make sure dates don't overlap.My simple code checks date ranges within a specific record (e.g. user enters 9/16/2011 or 10/21/2011, I throw an exception.)But, on the slim chance a user gets creative (e.g. 10/14/2011 - 10/23/2011 or even 10/14/2011 to 11/16/2011), now they have circumvented my check.BTW, the user could enter 10/14/2011 to 10/23/2011 if they were editing the record that contained values 10/15/2011 - 10/22/2011.So, I'm trying to solve this riddle with a linq query. However, what I have isn't working exactly right.
UPDATE Nevermind about code not working. While trying to provide an example to expand on Miika's repsonse, I found my answer. So, giving credit to Miika for pointing me in the right direction and posting my working code below:
Here's my code:
Private Sub CheckForOverlap(myMonth As Messages.MyMonth)
Dim am As New MyMonth()
Dim amCollection As Messages.MyMonthCollection
[code]....
I am trying to get a list of dates from a provided StartDate and EndDate in my database, and use these dates to link to dates in a database (to display another variable on the y-axis of the chart) and to populate the x-axis of a chart (with the list of dates). Is it possible to get a list of dates in VB and pass them into a chart this way?
View 2 RepliesMy approach is to setup three different queries and save to three different variables and then save the data in the three variables into the new table. I have the new table setup in ms access.As you can see from my code, I had tried many different ways to generate my sql statement but none of them works. Now I am trying to figure out which part of the sql statement goes wrong by testing one by one. The two that is uncomment:
1)Dim SDFH As String = "SELECT SegmentCode FROM SegmentPlantTable WHERE DatePlanted < cdate('" & Date.Today & "')"
2)Dim SDFP As String = "SELECT SegmentCode FROM HarvestTable WHERE DateOfHarvest <
[code].....
i just want to ask how can i populate a listview n vb.net that has a is limited by a date from and date to.i have a datetimepicker for start date and datetimepicker for end date and i want do list all the entry of my database in listview that is within the range of the start date and end date.
View 5 RepliesI have following code and I can filter data on grid but when I pick same date in 2 datepicker it shows nothing.
[Code]...
How to get if the date entered is in the range?
Ex. the month of April, the number of days is only 1 to 30. What if the user will enter the date range of 4/1/2011 to 4/31/2011 in the mask textbox? I am using Mask textbox because datetimepicker will not accept empty value and it cannot be empty either.
I'm asking this because I encountered an error when querying in MS SQL SERVER 2005. It says "The conversion of char data type to smalldatetime data type resulted to in an out-of-range smalldatetime value." I thought it was the casting or conversion problem. I've observed the SQL when transacting and I found no difference with my code.
So then, I just figured it out that my date exceeded the number of days of the April month.
Can somebody show me how to loop through days between two DateTimes in VB?
View 3 Repliesi am having problems getting my calendar to work, passing a start and end date for a rental car and displaying on the form the number of days chosen and the amount for the total. This is the first form problem I have done. I cannot see what I am doing wrong. It does not figure number of days and the amount just stays zero.
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
[code].....
I have following code and I can filter data on grid but when I pick same date in 2 datepicker it shows nothing. How can I fix the problem.
[Code]...
I have two DateTimePickers controls.I am wanting to loop from one date to the other, displaying the date in a msgbox.[code]
View 4 RepliesI'm trying the fetch only the date within the current and return how many rows Dim dc as new dataclassesdatacontext dim q=from p in dc.worktime where p.name.equals(session("name") and p.date ).count what I should I put after "p.date" ? And if I want to search for the record which there are record that are insert five days earlier, how to do that ? use (datetime.now - 5) ?
View 3 RepliesTrying to work out if there's a nice way of doing this, preferably in Linq rather than loops, which is what I've done for now.
I want the number of days my Product is active between two dates.
Product has many ProductHistories, ProductHistory has values for DateActive and DateInactive. DateInactive can be null, and often will be, to show that this history is ongoing. Histories won't overlap.
I want to sum the maximum of my startDate or the ProductHistory's DateActive, and subtract that total from the sum of the minimum of endDate or ProductHistory's DateInactive (endDate by default if DateInactive has no value).
Worked example:
Get active number of active days between 2011-01-01 (1st Jan) and 2011-02-01 (1st Feb)
Histories:
Active 2010-12-25 : Inactive 2011-01-05
Active 2011-01-15 : Inactive 2011-01-20
Active 2011-01-25 : Inactive null
[Code]....
i have an app that pings all IP's on my network and then adds all alive hosts to a list, then my WMI query runs for all of them ips and gets some information. it all works fine except for when it gets to printers and switches/routers which obviously dont support WMI. Is there some way i can check if a device supports WMI and skip the query if it does not?
View 2 RepliesI have a datagrid view with some data in it. The first column (0) is called 'Date' and contains the dates I want to work with.What I would like is to be able to filter (only display) the data between a date range selected by the user using 'Datetimepicker1' and 'Datetimepicker2'
This is the code I have. its not right of course, but it may help explain what I'm trying to achieve, I wonder if someone could give me a pointer?
[Code]...
i dun know wats wrong wit my code.....i would like to search the date which located between 2 date time picker and make it goes into print preview.
Dim CustomerFound As Boolean = False
Dim daterange As String
daterange = "[Date of Booking] >=#" & Datetimepicker1.Text & "# AND [Date of Booking] <=#" &
[code]......
I would like to select transaction id based from its creation date. All transactions are displayed on form load event on a datagrid. The select function should be executed on 2 datetimepicker (the first should be the start date, the last should be the end date).So there are three controls on a form, 2 datetimepicker and a datagrid. I managed to load all transactions into a datagrid, and managed to select/filter those transaction based on id, but not date.the table is called 'transaction_details', it contains 'transaction_id', 'transaction_date', and few other columns. transaction_id is the primary key.
View 2 Repliescode CrystalReport by two DateTimePicker but get error "Mismatched data types in criteria expression"
This is the code
Private Sub btfechascrystal_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btfechascrystal.Click
[code].....