Interface And Graphics :: [VB2010] - Convert Colors Values To Integer?
Mar 31, 2012can i convert colors values to integer?
View 6 Repliescan i convert colors values to integer?
View 6 Repliesi whant do my own shadow effect. i can do the shandow. but how can i plus 2 bitmap images(1 above the other)?
View 15 RepliesI want four rows in a row to share a color in a datagridview and alternate between two colors every fourth row. What I'm doing is this:
Code:
Public function FormCells() As DataGridViewRow()
Dim NewRow(Forms.length - 1) As DataGridViewRow
[code].....
i wanted use some api graphic functions. but how can i use the hdc argumenter, if the picturebox don't have it?
View 11 RepliesI'd like to check for all colors in an image. I've already came up with this:
Code:
Dim lst As New List(Of Color)
Dim img As Bitmap = System.Drawing.Bitmap.FromFile("C:image.jpg")
For x = 0 To img.Width - 1
[code]....
Unfortunately this needs to sweep through all the pixels, and it's EXTREMELY slow... method to get all colors in an image without sweeping through all pixels?
Is there an easy way to display the rgb code of system colors in VB2008?
That is, I am looking for some code that will retrieve the names of the colors that are used in the system colors and display their rgb codes (and maybe show a sample), so I could display, for example, what the rgb code for "control" is.
Problem1: I have a picturebox on a form. I have also managed to draw several PNG files with transparency onto the picturebox (see below). However, If I move the form outside the border and move it back, the image is gone. My source so far:
Dim k1 As New Bitmap(My.Resources.image1)
Dim k2 As New Bitmap(My.Resources.image2)
Dim drawMe As Graphics = PictureBox1.CreateGraphics
Dim bgcolor As Color = Color.FromArgb(128, 128, 128)
drawMe.Clear(bgcolor)
[Code]...
I'm drawing polygons,lines,etc. and I have to have the points of each precise - up to 12 decimals. Since a Point only takes integer values, I'm not sure how to handle scaling. I have a working user control, but rounding the decimals so I can put them into points is causing incorrect calculations (area, ect.).
View 4 RepliesI am developing a software that would scan the image in a picturebox and obtain the rgb values of each pixel in the image and convert each rgb values to HSL values. I am using vb 2008 express edition. I am still a student. All I have done is to obtain the image in a file and paste it in the picturebox. Below is my code. I dont really know how to start with the process of obtaining the rgb values of each pixel and converting them to HSL values and averaging the HSL value.[code..]
View 1 RepliesI am working on a Windows application written in VB with Visual Studio 2005. I have a number of fields where the user needs to enter currency amounts. I am using a MaskedTextBox with the following currency mask. msktxtAssessedVal.Mask = "$ #######.99"
The problem that I am having is that when the users type in the value, the cursor always starts at the leftmost position and appears to force as many digits as the mask. The typical data values can vary anywhere between 9,999,999.99 and 20,000.00. If the users do NOT have a value that has 7 digits left of the decimal point, they need to move the cursor to the correct position before they start typing in the value. These users are used to quickly typing in their data, then tabbing to the next field so the current behavior is not acceptable. We previously used a ComponentOne MaskedTextbox, however, their controls now are no longer free and the boss will not pay!!!
Does anyone know if there is a way for the maskedtextbox or any text control to detect where the user types the decimal and format the data accordningly?
Im working on a project that needs to print a report of one client.Everything went smooth untill i came across my multiline input text data.When i display it in the PrintPagePreview the text go's outside my page. Even when im printing it only the halve of my text is displayed. I googled and looked everywhere but i can't get a clear fix for it.
[Code]...
I used to program with Visual Basic 6, so I have alot of old programs that I'm updating, plus I'm learning the new VB2008 methods. I'm writing a program that replaces the old "BitBlit" function which is no longer supported by Visual Basic 2008. It involves three picture boxes, one holds the sprite bitmap, a second holds the mask (silhouette) of the sprite bitmap, and a third has a background image.
[Code]...
drawing text on a window which is not the current form's window.I remember doing this in Win32 api with getwindowdc(handle) to obtain a DC for the Window, then textout() on the DC.
View 2 Replieshow to create a user interface in a game such as the application XFire using Visual Basic?
View 3 RepliesI'm working on a design project where I have to use a Graphical User Interface that contains a drag and drop form. It consists of having a window dropped on a wall. Both of them are images to scale. I would like to know what kind of code I would have to use to show the x and y coordinates of one of the points of my window when dragged so when I drop it, I'm dropping in it on the desired coordinate of the wall.
View 2 RepliesOk, I want to create a class that will handle a special rectangle graphic.In my form, I want to have two of these special rectangles. So, basically, I need two instances of that class in my form, right?I manage to initialize two, alright. But, how exactly am I supposed tomanage drawing/graphics etc in a class, and the results to be displayed in my form?
View 13 RepliesUsing graphics paths for designing...but am getting an error when trying to add a shape to : _shapelist.add(createshape())
It says : Value of type 'system.drawing.drawing2d.graphicspath' cannot be converted to '1-dimensional array of system.drawing.drawing2d.graphicspath'
I want to draw a string like WWW with 3 different colors. If i use e.Graphics.DrawString("WWW", RichTextBox1.Font, Brushes.Green, 150, 150) it will print in a color but i want to print in 3 different colors.
View 4 RepliesI was wondering if I could elicit some tips on how to procede with an interface design approach.That is. What is a good way to go about establishing a "work area" where one can have multiple "floating forms" in this area.Can you have a form which occupies the entire windows desk top and the other forms "float" in this space? the "floating" forms would need to interact with each other where pressing buttons etc on them would affect other forms on the "workspace") Or what would be a good way to start accomplishing that? Or is there a better way to get the same effect?
View 4 RepliesI'm trying to make a .dll that contains a lot of basic functionality that a program can use. Currently i am trying to use interfaces to make a lot of this functionallity independend of the program using it but i hit a snag. The Basic idea is that a programmer will create his own object using the interface discribed in my .DLL file. Then implements those functions as he likes. He can then instanciate a controller (found in the same DLL) and sends his custom object implementing the interface to that Controller. The controller can then be started and will take over all the work. I do not know what type of object is send to the controller and idealy i want to program it in such a fashion that i shouldn't care as long as the object send implements that interface.In code I am trying to achieve the following: (quite simplyfied)
.Dll:
Code:
Public Interface MyInterface '<----Decleration of the interfaceFunction GetData() As Integer
Function SetData(Data As Integer)
end interface
[code]....
this propperly. I know that the second i set the interface adaptor in the Controller VS comes nagging that it can not be converted to a "MyInterface" Class. Obviously i am doing something wrong. I can change the datatype that the controller expects to the "MyController" type but that would completely ruin the whole idea of flexibillity. I am hoping someone sees what i am trying to do and can point out where i made the thinking error.
Is this where i would post a picture of my interface and get feedback on changes for easier use? If not is there someplace on this forum or any other forum to do this?
View 1 RepliesSo I decided to make my famous tile selector project, but instead of drawing in a form's graphics, do it inside a tabpage.Well, I managed to get it working, but it seems to... flicker.Normally, setting the form's DoubleBuffered property to True would help a lot there, but apparently, the tabpage has no such property.
When I invalidate the tabpage, I draw two images and fill one rectangle.Following past advice, those two images were created before, just once, and are stored in a variable so I don't create them every time I invalidate the tabpage.
Ok I have this: This makes a sub called 'graphicspaint' then writes "demo version" to a picturebox1
Code:
Imports System.Drawing
Imports System.Windows.Forms
[code]......
Is it possible to see the different colors (when using the graphics class) in a palette somewhere? It's hard to choose from the names only (DarkCyan, IndianRed ect, what is this!? )
View 7 RepliesA c# class's single dimension byte array contains socket level instrument sensor data as per:
public static byte[] frameData
1. Is there either a program or a way of using vb.net where I can load an image and get a reading of every hexadecimal value for every pixel location in the image? Quick example, sometimes, I'll load an image into Microsoft paint and I try to determine which colors are being used in certain locations of the image but all I can do is guess.
2. If it is possible (especially using vb.net), is there a way to build an image by manually coding hexadecimal values for every pixel location, then, saving the image? The thought here is that I can build my graphic and then try different color schemes until I'm happy with its presentation.
I've a dynamic integer array to which I wish to add new values. I've looked elsewhere but couldn't find anything definitive.
Dim TeamIndex(), i As Integer
For i = 0 to 100
'TeamIndex(i).Add = <some value>
Next
lets say I have a form (form1) with lables a-z which are all designed with default text "0". So they all show 0 on program startup. which is fine. I also have a dialog with 2 TextBoxes; I want my program to update the default text/value on (only)form1 labels x, y and z to whatever was put into the textboxes when i press the OK button on the Dialog, so these specified labels show the 'new' value on next startup. Is it even possible or should I save the values to a file which loads the values in the specified labels on startup?
View 5 RepliesI load my picturebox with a jpeg. If I put my DrawObjects() sub into picturebox paint event.When ever a picturebox.refresh or picturebox.visible = true (vb.net seems to draw my DrawObjects() first, then load the jpeg Image over my drawing - erasing drawing) Is there a way to get the picturebox to redraw the jpg image first then draw on it, in picturebox paint event?
View 10 RepliesI'm trying to set an Integer value from my.settings.The values comes frpm a listbox, and then inserted to settings (set to specialized.StringCollection)The problem is when i'm trying to get the values and apply them to my function.Error code: Conversion from string "65 & 71" to type 'Integer' is not valid.To me it looks right, but maybe i'm missing something.
Code: Dim test2 As Integer Dim test As System.Windows.Forms.Keysm trigglist As New StringBuilderor Each item As String In
[code].....