In a application i'm working on i need to be able to select a graphic (a line to be specific) and then i need to change or move it but i cant find how to add a click event to the line when a draw it. Basicly i want to click on the line to select it (make it fatter or an other color) and then be able to alter it in position and size (lenght). Is there any way or what is the correct way to do this?
View 6 Replies
I'm trying to make a mini map for a 2d space shooter of mine; I've for the math down (I think) for when an item should appear on the mini map, but the problem is the graphic. As it stands, the graphic spills over the edge of the mini map graphic and disappears only when it's fully outside. I need it to crop the image, or at least not show it off the mini map graphic.I thought of using the sourcerect rectangle of the spritebatch.draw, but it seems to me that would only work for the right and bottom section, as I can adjust the size of the rectangle. I haven't tried this yet, but I will soon. Can the location of the source rectangle be changed in relation to the graphic that it is a part of being drawn so that I can use that to crop the left and top sides?
View 5 RepliesI'm a web designer and I was asked to make a GUI design for a Visual Basic desktop application. I'm looking around but cannot find good documentation for designers. Can anyone make me some suggestions about where to start?
View 2 RepliesI am struggling with VB.NET's graphics paradigm.There are several times in my code when I need to determine the width of some text. Under VB6 I would use the .textwidth() method pretty much any time I wished.Under VB.NET it appears that the paint event is the only place I can gain access to an initialized graphics object and from that the measurestring() method.
View 3 RepliesI want to rotate a graphic at a point and I used the centerX and centerY to define the center of rotation.
Here is what I wrote:
Dim rotate_mirror as new RotateTransform(CSng(txtbx_rotate_by.text))
rotate_mirror.centerX = 5
rotate_mirror.centery = 55
blk_mirror.RenderTransform = rotate_mirror
blk_mirror is the graphic I want to rotate. Unfortunately, It does not work.
How can I set a button, so that when it is pressed, it stays in the pressed down graphic state. Then when pressed again it returns to the normal not-pressed visual.Make a button stay like this until pressed again: url....
View 3 Repliesmy interface is like this, i've put 4 text boxes above, followed by a Generate Button in the middle and a multiline text box below the Generate button (please see the attachment)
so all i want is when i click the Generate Button, i want the data entered inside the above 4 text boxes to display in the multiline text box at the bottom in 4 seperate lines and not in 1 row. Also i would like to have some line spaces.
this is the code i used
Code:
' This is used to display in Bold
OutputTextBox.Text = "" & TextBox1.Text & ""
' This is used to display TextBox2.Text
[Code]....
Just wondering, is it possible to put some tabs above the big multiline text box at the bottom, say like 4 tabs and each tab consists of a big multiline text box inside it. And then when clicked the Generate Button which displays different data ...
I'm trying to rotate a mirror, which I represented by a line across a specific point. I translated the point of rotation to the center, rotated by an angle indicated in a text box and then translated it back to its original position.
Here is my code :
Quote:
HTML Code:
Dim theta As Single
Private Cntr_X_blu_Mirror As Single = 5
[Code].....
I hope the code is good. The problem I encountered is that the line becomes smaller and smaller as I rotate it. and that's bad! Sometimes it even grows longer [I think when I rotate it in the oposite direction!]
Also, when I rotate it at 90 degrees, the rotation does not resembles a 90 degree rotation. It seems to be inclined at 45 degrees instead!
insert images in a combobox. I understood the code, but what I'm asking is how do I add multiple images per line of the combobox?? I mean the way, the smileys are displayed in dropdown grid in Yahoo! messenger or the sort when you click on the smiley button..
I'm using Microsoft Visual Basic 2008 Express Edition with .NET Framework 3.5
I'm trying to bring up a simple right-click menu on a listbox and I'm having little luck with it. I created a basic ContextMenuStrip named "ContextMenuStrip1" and I'm trying to call it in the ListBox's Mouse Click method:
Code:
Private Sub ListBox1_MouseClick(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles ListBox1.MouseClick
If (e.Button = Windows.Forms.MouseButtons.Right) Then
ContextMenuStrip1.Show(MousePosition)
End If
End Sub
So here's what it's actually doing. The right mouse button doesn't seem to activate MouseClick at all for this object. It is caught in MouseDown, but when I try to call this from that method, the ListBox Index doesn't change. How can I get a right-click to be called from the MouseClick (Not imperative) and how do I get the ListBox to change the index with a right-click?Also, the menu looks like one of Office's right-click menu that can have an image to the left of the text. When I don't have an image the text is about 50 pxls or so away from the left edge. This looks weird. Can I change that?
This is a working example which draws a rectangle on different location every timer_tick and I fully understand now how it's working:
Code:
Dim i, timercount As Integer
Private Sub PictureBox1_Paint(ByVal sender As Object, ByVal e As System.Windows.Forms.PaintEventArgs) Handles PictureBox1.Paint
[code]....
Now I'm looking for a way to draw this rectangles without refreshing them every single tick. I've just started using Visual Basic and I really don't know how to call/raise PictureBox1_Paint event every timer_tick or how to store drawing data in member variables?
In my Main class I have this event which as you can see simply closes the form. It is triggered from a ToolStripMenuItem called miExit.
Code:
Public Sub miExit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles miExit.Click
[code].....
I would like to build a line chart which can redraw or change during a period of time with dynamic data. So that the x, y axis will change if out of range. The graph may be somehow similar to Matlab. I am using vs2005.
View 2 RepliesI look at hundreds of VB.Net user interfaces through the internet and they all look horribly unsophisticated from a graphics point-of-view.Compare this to the backgrounds seen on tv broadcast that use blurred line gradients to create graphics that have some interesting appeal and draw the eye to them (at least my eye).I've attached some sample screenshot grabs below that I have annotated with magenta rects showing the interesting sections.What types of graphics routines can produce these types of graphic effects? The options that I have identified so far:
1.) More carefully done line smearing (see below..)
2.) Line drawing with a VB.Net version of the "Bresenham's line drawing algorithm"(as passel mentions in this post) (that might allow a specialized set anti-aliasing routines - like a wu algorithm).
3.) Line drawing with some Gaussian blurring as seen in the attachment to this post from my Perlin Noise thread.
4.) Possibly a gradient shaped by a vector GraphicsPath?
5.) Some other VB.Net gradient generating method?Possible the use of multiple passes with an alphafade brush?
6.) Last resort: manipulating the colors of individual pixels with lockbits marshal copying (highly undesirable).
I've done a fairly complete survey of whats out there on the internet for VB.Net samples for drawing lines to see if any of them combined line drawing with gradient effects and found very little.I played around with some code I found that did line drawing through mouse dragging and managed to achieve what I call the "line smearing" effect.I've attached my Line_Smearing_Demo below..As yet I have been unable to combine lines with shaped bezier curves,to produce Guilloche/Lissajous/complex Spirograph patterns like those seen on this page.
I need to visually moves the cursor using keyboard keys.
1) I need to get the mouse to where the button is
2) Simulate the mouse movement to the button from whereever it is
3) and simulate a button click.
Only after I select a button I can start drawing on my form. I have a code here, when I hold the Ctrl key and press the arrow keys, the mouse will start drawing straight lines. But what happen when I need to use controls like buttons, comboboxes etc.?
I've got this code which draws a line and it moves down to a point then two curves are drawn coming off of it. I need to get it to repeat itself after a short period, so there's a constant flow of lines moving down then becoming curves.[code]
View 3 RepliesIs it possible to detect a mouse leave to the left. For example: I have a label and when I hover over it the text changes to "Hovering", and when I leave the label from the left I want the text to change to "Exit left" or if I leave the label from the right that text changes to "Exit right".
View 1 RepliesBack in the VB6 days, I could count on frmWhatever_Resize() to be fired when a form is loaded. That doesn't still seem to be the case. Since my resize event is filled with all the code I want that adjusts the size and placement of things, I decided to just call it from the end of the form's load event. That has no affect. I'm guessing that the form isn't actually shown until form_load is finished?
is there some other event that is fired when a form is shown, so I can call my resize code there?
Problem drawing dotted path lines, with even dots along the path line.I want to draw a path line that can be any shape (square, round, outline etc), and along this path line I want even dots to appear.
I also want to be able to resize the shape (as in the example attached)This is very easy to do using "DrawPath" and defining points for the path and using a pen defined as dots.The problem I have is I want the dots to be evenly placed along the path, on any shape or size I draw.In the example I have created, I create a square with 4 points and draw a dotted path.There are 2 buttons that allows me to resize the square (larger or smaller) this helps show the problem more clearly.
The path starts at the top left corner and finishes back at the top left corner, the dots are evenly placed along the path, except the final dots at the end of the path. (Sometimes the dots are even and other times they are not even).The shapes I want to draw can be any size and any shape, but I have used a square in this example to show the problem I have. point me in the direction I need to go that allows me to draw the dots and give the impression that they are even all along the path, for all shapes and sizes.
In the pictures below if you change the size of the shape, one will have even looking dots, the other will not.
[Code]...
Apologies as this has probably been answered a million different times a million different ways already. I'm trying to control the mouse. I wish to move the mouse to a given pixel position (x, y) and cause a click. I don't want this to be limited within a form, as I want to control another application. I'm using VB 2005.
View 4 RepliesThe scrollbar that comes with the ListBox is too small for touch screens, so I use my own scrollbar instead. But when you do this on various forms you end up repeating a lot of code. So my solution was to create a custom scollbar that has a property I can set to the control I want it to be a scrollbar for. In vb6, I can use the withevents keyword to get access to the control's events so that all the scrollbar related code can be in the custom scrollbar object I created, except...I had to create a refresh method for the consuming code to use to let the scrollbar know when the number of items changes. The scrollbar doesn't need to be told how many items there are because it has access to the control, but for a listbox there is no event to tie into when an item is added/removed so not 100% of the scrollbar related code could be encapsulated.
View 2 RepliesIm working on a project that needs to print a report of one client.Everything went smooth untill i came across my multiline input text data.When i display it in the PrintPagePreview the text go's outside my page. Even when im printing it only the halve of my text is displayed. I googled and looked everywhere but i can't get a clear fix for it.
[Code]...
I used to program with Visual Basic 6, so I have alot of old programs that I'm updating, plus I'm learning the new VB2008 methods. I'm writing a program that replaces the old "BitBlit" function which is no longer supported by Visual Basic 2008. It involves three picture boxes, one holds the sprite bitmap, a second holds the mask (silhouette) of the sprite bitmap, and a third has a background image.
[Code]...
drawing text on a window which is not the current form's window.I remember doing this in Win32 api with getwindowdc(handle) to obtain a DC for the Window, then textout() on the DC.
View 2 Replieshow to create a user interface in a game such as the application XFire using Visual Basic?
View 3 RepliesI'm working on a design project where I have to use a Graphical User Interface that contains a drag and drop form. It consists of having a window dropped on a wall. Both of them are images to scale. I would like to know what kind of code I would have to use to show the x and y coordinates of one of the points of my window when dragged so when I drop it, I'm dropping in it on the desired coordinate of the wall.
View 2 RepliesOk, I want to create a class that will handle a special rectangle graphic.In my form, I want to have two of these special rectangles. So, basically, I need two instances of that class in my form, right?I manage to initialize two, alright. But, how exactly am I supposed tomanage drawing/graphics etc in a class, and the results to be displayed in my form?
View 13 RepliesUsing graphics paths for designing...but am getting an error when trying to add a shape to : _shapelist.add(createshape())
It says : Value of type 'system.drawing.drawing2d.graphicspath' cannot be converted to '1-dimensional array of system.drawing.drawing2d.graphicspath'
I was wondering if I could elicit some tips on how to procede with an interface design approach.That is. What is a good way to go about establishing a "work area" where one can have multiple "floating forms" in this area.Can you have a form which occupies the entire windows desk top and the other forms "float" in this space? the "floating" forms would need to interact with each other where pressing buttons etc on them would affect other forms on the "workspace") Or what would be a good way to start accomplishing that? Or is there a better way to get the same effect?
View 4 RepliesI'm trying to make a .dll that contains a lot of basic functionality that a program can use. Currently i am trying to use interfaces to make a lot of this functionallity independend of the program using it but i hit a snag. The Basic idea is that a programmer will create his own object using the interface discribed in my .DLL file. Then implements those functions as he likes. He can then instanciate a controller (found in the same DLL) and sends his custom object implementing the interface to that Controller. The controller can then be started and will take over all the work. I do not know what type of object is send to the controller and idealy i want to program it in such a fashion that i shouldn't care as long as the object send implements that interface.In code I am trying to achieve the following: (quite simplyfied)
.Dll:
Code:
Public Interface MyInterface '<----Decleration of the interfaceFunction GetData() As Integer
Function SetData(Data As Integer)
end interface
[code]....
this propperly. I know that the second i set the interface adaptor in the Controller VS comes nagging that it can not be converted to a "MyInterface" Class. Obviously i am doing something wrong. I can change the datatype that the controller expects to the "MyController" type but that would completely ruin the whole idea of flexibillity. I am hoping someone sees what i am trying to do and can point out where i made the thinking error.
