Keep Getting Errors When Try To Write Checkings & Savings Prog?
Jun 18, 2011Public Class frmBank
Dim sr As IO.StreamReader 'sets variables throughout the program
Dim FromFile As String
[code].....
ADVERTISEMENT
Write Program That Does Count Down On Number Of Seconds Entered In D Prog
Jun 13, 2011I have to write a program that does a count down on the number of seconds you entered in the GUI I have most of the code and it basically has to countdown the seconds i type in the txtStart. Attached is the program design..This is what i have so far with the code. It converts seconds to hours and minutes and seconds, but it doesn't do the countdown.[code]
View 2 RepliesErrors With Write() Function
Apr 27, 2010I have a bit of a problem with the following bit of code. Basically the last line (Return Write...) is giving me the error 'Expression does not produce a value'.[code]...
View 1 RepliesData Errors In File After Write?
Jul 4, 2011I am having problems writing correct data to a file. I create a string of characters (approx 5000 bytes long). The string is a mixture of text characters and numbers converted to bytes. I then:
a) write the string to a readable text file
b) display the string contents to the console
c) write the string to a file - BDF.bin (I tried both IO.BinaryWriter and IO.StreamWriter but get the same error)
The byte pattern for the text readable file and the data displayed on the console match and for the most part , data bytes in the StreamWriter file are correct (first 4096 bytes are OK) but there are some extra bytes and some wrong bytes.Here is a comparison of byte patterns (hex values character written to the file) starting at byte 4096
Console: 45 44 52 31 00 00 00 00 01 00 00 00 90 01 00 00
Binary File: 45 44 52 31 00 00 00 00 01 00 00 00 C2 90 01 00
The byte patterns match, however in the binary file, there is an extra byte (C2).To display the console data, I read one character at a time from the string and display it using hex(asc(mid(string,i,1)))I view the binary data in the BDF.bin file using a hex editor program. I even tried 2 other hex editors and all showed the same byte info.
Write Disk Errors To The System Event Logs?
Sep 8, 2010I am trying to write disk errors to the system event logs.I have a list of errors reported to the event logs if disk issues occur.So i just want to write dummie errors to the logs so I can do testing.I am able to write to the logs but the description comes up as follows:
[Code]...
Download Makes Prog Non-responsive?
Jul 27, 2011i have a problem.. i use this code to download:Dim dl As New System.Net.WebClient dl.DownloadFile({online_file}, {local_file})now, it does download the file. my work is done. the only downside is that, until the download is finished, the program crashes!if i download a 5kb .txt file, all is ok, you wouldnt even notice
if i try to download a 15MB .rar file though.. now the program crashes for a long time! when the file is fully downloaded it works just fine again.how can i make it so that downloading doesnt make the application non-responsive?(and if possible, how can i make it see how many kb is downloaded? like at this second its 15kb of 2048kb)
VS 2008 Make .net Prog Connect To An Access Database
Apr 27, 2010Been trying to make my .net prog connect to an access database. I cant figure out why I keep getting this generic error message. A first chance exception of type 'System.Data.OleDb.OleDbException' occurred in System.Data.dll Heres my code.This is my class to create the connection to the database:
[code]...
Daylight Savings Change?
Mar 8, 2009Dim StartTime As Date = New Date(2009, 3, 8, 1, 59, 0, DateTimeKind.Local)
Dim EndTime As Date = New Date(2009, 3, 8, 3, 1, 0, DateTimeKind.Local)
Dim TimeDifference As TimeSpan = EndTime - StartTime
[code]....
Converting Daylight-savings Date?
Jun 30, 2011I have a string "2011-06-30 09:55 EDT" that uses the US daylight savings format. Date.Parse cannot convert this because this is a non-standard format (EDT instead of EST). Is there a way to convert this string using Parse?
View 3 RepliesDetermining Daylight Savings Time?
Mar 13, 2011I have a simple app that just shows the current time for specific locations around the world. I need to have it adjust for daylight savings time. I *THOUGHT* I'd already coded this but....
I thought I would use "Today.IsDaylightSavingTime()" and add 1 hour to the clocks. It isn't working?
If Today.IsDaylightSavingTime() Then
HawaiiOffset = HawaiiOffset + 1
PacificOffset = PacificOffset + 1
[Code]....
Clocks Routine & Daylight Savings Time
May 28, 2011I have a form that has clocks for Hawaii, Pacific, Mountain, Central, Easter, GMT/UT, UK, Germany, Mumbai, Manila and China.I assigned a timer to tick the seconds and wrote the following code for the tick:[code]
View 8 RepliesGet True Or False On Daylight Savings In Another Timezone?
Mar 28, 2010I am trying to get a program to recognize daylight savings in Sydney NSW Australia, but everything else in the program to stay on my current timezone settings Brisbane Qld Australia. All I ned it to do is to check a box (true or false).I have tried typing in dates and coding but I need it to think for itself, I don't want to have to change it every year.I'm using Visual Basic 2008?
View 10 RepliesVS 2010 Prog Appends A Textfile - User Able To Delete Or Modify While Form Open?
May 17, 2012Prog appends a textfile. Don't want user able to delete or modify while form open. How do I do this?? - As long as form is open user cannot modify or delete textfile. But so the file can be edited from within form
How do I do this. Here is my code so far
Public Class Form1 Dim FILE_NAME As String = "C:UsersBirthdayDocumentsinfo.txt" Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
[Code]...
Asp.net - "System.Web.HttpException: Request Timed Out" Errors On Response.write
Jul 22, 2009I am getting an intermittent "System.Web.HttpException: Request timed out." error when my code hits the line response.write():
sMessage = "Searching...0% complete."<br>
sSetVal = "<script>document.getElementById('MessageDiv').innerHTML='" & sMessage & "';</script>"<br>
Response.write(sSetVal)
Note that Response.BufferOutput = false is set when the page first starts executing (well before the above code executes).The code is used to update a progress message while other threads execute long-running processes. One thread runs continuously and checks the status of the other threads. As the other threads finish, this thread outputs updated status messages to the end user. I realise that this could (should) be recoded using ajax, but it is a legacy app and that is not an option at the moment.
This code is run 10,000+ times a day, and the error only occurs about 5 times - so I suspect the response object is being blocked by other threads when the website gets busy. However, I don't know which performance counters to check in the performance monitor. Or is this problem caused by something else? I am using IIS 6, asp.net v2 and vb.net?
DateTime - Call To Determine Daylight Savings Time?
Sep 3, 2010Is there a way in VB.Net to determine if the timezone the current system has daylight savings time in effect? Of course I can get the offset from GMT using the "z"/"zz" formatting option, but that doesn't tell me if DST is in effect for the current timezone or if the current timezone is in standard time...or if DST/Standard time aren't even an issue in the timezone for the system.
View 4 RepliesTimeZone Info Object Reporting Daylight Savings Rules
Feb 2, 2011I need to write some code to tell the user when daylight savings starts and ends in another timezone, this is what I came up with but it keeps selecting the last Else line. The other lines are working fine, the problem is only with the lines, daylight savings today and not tomorrow. There is probably a much neater way of doing this but I thought this would work.
Private Sub Auto_Time_Change()
Dim sydneyTime As TimeZoneInfo = (TimeZoneInfo.FindSystemTimeZoneById("AUS Eastern Standard Time"))
If TSSlblTimeZone.Text = "Normal Time" Then
If CurDate.AddDays(1).Day = "1" Then
[Code] .....
Show The Growth Of Savings In A Bank Account Using Input From Two Text Boxes?
Mar 29, 2010I'm using VB 2008 express edition.I have to show the growth of savings in a bank account using input from two text boxes that will be deposit amount and interest rate. I have attached a picture of my form.I have declared my variables and now I'm working on my processing.When the compute button is hit, based on the deposit amount and the interest rate, the amount of years it takes to double the money and the amount of years it takes to become a millionaire with that amount will be displayed in the lower text boxes.
Here's some of my math reasoning...
Doubling time formula : 2P = P(1+ i)^n I tried solving for ^n and got: n = logP(1 + i)/log2P
Is this correct? How do I express logarithms in VB?As for the amount of years that it takes to become a millionaire, can I simply take the deposit amount for example $500 dollars and divide 1,000,000 by 500 to get 2000 so it takes 2000 deposits of 500 dollars each to reach 1 million. Is my arithmetic correct?
ASP.NET UpdatePanel Timeout And 500 Errors With Custom Errors?
Sep 23, 2011I have a .net application that uses customerrors web.config module to display meaningful messages for errors. It works without any issues for 500 errors/exceptions caused by non-ajax and ajax components (updatepanel). However, in a scenario where updatepanel's asynchronous request times out, there is no error raised at all. I was able to see the timeout in firebug and come up with a solution that would at least display the error message as an alert and then redirect the user to the 500 error page using javascript but it's not quite doing what the rest of the application does in case of an unhandled errors like these. I basically just want everything to go through "LogEvent" mechanism so based on the severity of the error, it does the necessary work.This 500 error page doesn't have anything in the Server.GetLastError() for these timeout scenarios. Is this an expected behaviour? Can it be changed so I do have access to these timeouts in Server.GetLastError() OR maybe just run this error through "LogEvent" mechanism? Is there a better/more graceful way to handle this issue?
Below is my code to give you an idea, not exactly what I have in my application but pretty close.
Web.Config
<customErrors mode="On" defaultRedirect="~/Errors/ErrorUnknown.aspx" redirectMode="ResponseRewrite">
<error statusCode="500" redirect="~/Errors/Error500.aspx" />
</customErrors>
[code]....
Writing File/Folder Sync Prog, Result Text Boxes Not Updating Untill After All File Action Is Done Even Though Update Code Comes Before Copy?
Apr 12, 2011I am working on a program using VB.Net 2010 which will enable me to setup groups of files & folders for back up with syncing capabilities etc. I have a concept program which is based on some sample code I found out in one of the VB.Net forums. I have modified it from a command line based program to a form based program. At the moment I consider this code to be a "concept" program which once I have the various copy/sync routines developed and debugged will be integrated in to another program I wrote for
creating "Back Up" groups to automate the process. There are some 3rd party programs that do similar things that I want to do such as Microsofts Sync Toy, but none of them offer the grouping and exclusions options that I am going to program in to this backup/sync program.
So here is my problem, I have the included code taking two folders, a source and a destination, and copying everything from the source to the destination. It will skip over any unchanged files/folders and will delete anything found in the destination folder that is not found in the source folder and it will update all files in the destination folder that have a newer version in the source folder. In other words it will mirror image the source to the destination but will be smart enough not to copy unchanged items from the source to the destination thereby saving a lot of time. The sync part of the program is working fine, the displaying of the progress and results is not.
[Code]...
Publish Build Errors (But No Errors In Debug Or Build) VB 2010
Jan 4, 2012So when i build or click debug on my program. No errors come up and its smooth. So i decide to publish my programme. However. I come up with a bunch of errors during the publishing.
Here they are:Error 1 Cannot publish because a project failed to build. 1 1 Simple CALC
Error 2 Unable to copy file "binReleaseSimple CALC.exe.manifest" to "binReleaseapp.publishApplication FilesSimple CALC_1_0_0_0Simple CALC.exe.manifest". The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.
Mystream.write(t) Doesnt Work - Doesent Write Anything To My H.txt Text File
Dec 27, 2011I have a trouble making this code work. When executed, it just creates a correct (with the correct name) file with the extension .txt but the the actual text inside .
Imports System.IO
Public Class Form1
Public mytext As String
[code]...
The strange thing is that while debugging, h, t string variables have the correct values, but somehow mystream.write(t) doesnt work (it doesent write anything to my h.txt text file...
Write And Saves It And Gets The Xbox 360 Achievement Pop Up Saying "Gotta Write This Down?
Jun 29, 2009Ok i saw this guy on youtube that made a achievement generator for his computer. For example, he goes to notepad and write something and saves it and gets the xbox 360 achievement pop up saying "Gotta write this down" and all that. Cud this have been coded thru VB.NET or something?
View 1 RepliesWrite Some Javascript Code In Response.write When SqlDataSource1_Deleted?
May 23, 2012i have a notification j-query plugin .. i taste it in my page (working 100%)but when i want to use it in a event SqlDataSource1_Deleted with the response.write method it does not work
Protected Sub SqlDataSource1_Deleted(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.SqlDataSourceStatusEventArgs) Handles SqlDataSource1.Deleted
Response.Write("<script type='text/javascript'> showNotification({message: 'This is a
[code].....
Write A Program To Write In A Xml File?
Sep 14, 2010I want to write a program to write in an xml file in this format:
<?xml version="1.0" encoding="utf-8" ?>
- <Orders>
<Item id="1" SKU="998123" Description="Super Widget" Quantity="100" />
[Code]....
Errors In VB App?
Aug 18, 2009I am writing a app in VB and get errors with inserting or deleteing records. I can do a try catch in by app, but I would like to know how to make the cryptic error messages that I get back from my tableadapter queries into messages that make sense to the end user.
Ex. ERROR [23000] [Microsoft][ODBC SQL Server Driver][SQL Server]The DELETE statement conflicted with the REFERENCE constraint "FK_License_Vendor". The conflict occurred in database "AssetsSQL", table "dbo.License", column 'VendorID'. ERROR [01000] [Microsoft][ODBC
[code].....
How To Fix .Net Errors
Apr 1, 2010i get this big error whenever i run my program on another computer. Basicly it says im missing a dll. Is there a code that if there is a error i will just continue running insted of pulling up this window and saying .Net Framework Error.
View 2 RepliesADODB Errors ?
Jan 13, 2012For some reason this is giving me errors..
Private Sub Button4_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button4.Click
Dim ConnectionString As New ADODB.Connection
Dim rs2 As New ADODB.Recordset
[CODE]...
Calling Dll But Got Errors
Sep 21, 2011So I've made an dll file from an .vb file .dll file : Public Class ControlDigits
[Code]...
Errors In DAO Recordsets?
Apr 3, 2012i just started programming using DAO recordsets and almost everything works great, most of what I did is database stuff.including movefirst and other stuff like that. But when my boss came and deleted everything in the database and clicked on movefirst i got an error that says no current record. is there any way for me to trap that error
Dim AccessEngine As New DBEngine
Dim db As Database = AccessEngine.OpenDatabase(DatabasePath)
Dim dbs As Microsoft.Office.Interop.Access.Dao.Recordset = db.OpenRecordset("myTable",
[code].....
Errors Msg For Toolkit
Aug 18, 2010why ( toolkit script manager ) the error is:
Could not load type 'System.Web.UI.ScriptReferenceBase' from assembly 'System.Web.Extensions, Version=3.5.0.0, Culture=neutral