When I'm working in 2005 All the Libarys look like they are there however when I'm working with 2008 It looks like the The Whole Thing Was Narrowed Down to about 3 Namespaces any Suguesttions On Why or How this is happening?
View 1 RepliesWe have an VB.net application that is being moved from one box to another. It runs great on the old box. The new box is configured the same as the old one but is on newer hardware. When I run the application on the new server it complains that the adobe toolkit that we use can not be found.
View 2 RepliesI getting an error which is:
Error 1 Task failed because "AL.exe" was not found, or the correct Microsoft Windows SDK is not installed. The task is looking for "AL.exe" in the "bin" subdirectory beneath the location specified in the InstallationFolder value of the registry key HKEY_LOCAL_MACHINESOFTWAREMicrosoftMicrosoft SDKsWindowsv6.0A. You may be able to solve the problem by doing one of the following:
1) Install the Microsoft Windows SDK for Windows Server 2008 and .NET Framework 3.5.
2) Install Visual Studio 2008.
3) Manually set the above registry key to the correct location.
4) Pass the correct location into the "ToolPath" parameter of the task. OutlookBar v2 2005.
I have a solution which upon a button push, loads a PDF into the application for viewingThe loaded PDF is an index page linking to other PDFs. This all came off a CD of a VendorMy client want me to create a "Job Book" of all the CDs from these vendors.Here is the issue.When select the button for a particular document, the front page of the PDF (Index Page) load fine. The loaded PDF has buttons as links to the various pdfs so when I select a button within the loaded PDF I get a message stating it cannot find the pdf requested. The buttons within the index pdf are all set to relative path so all the folders should be available. but alas the program does not find them.
View 2 RepliesCreated for Bill Smith Bill Smith 100 Maple St. Nowhere, MI 49091 Program Information undecided about Your Career Path? I can find the position where "Created for" occurs in the string
VB
Private Function FindText(ByVal strText As String) As String
Return InStr(strText, "Created for")
End Function
I am trying to get the first and last name that occurs right after the "Created for" in that string but I have not found a good way to do so. Essentially there are multiple files in a directory that I am spinning though and changing the name of the files to match the name in the file.
Once again I've ran into a (at least for me) weird problem, which I can't figure out.I have a form which allows users to send an email with an attachment and also stores the email in an accessdatabase. When sending an email without an attachment, there is no problem and all is saved to the database.
But when sending an email with an attachment, it produces an error that the database is not found, and therefore nothing is saved to the database.
[Code]...
I have a crawling program that fetches urls to parse the html and came across an unusual error since I started this. For a specific set of urls from a site when fetching using HTTPWebRequest and HTTPWebResponse I get the error The remote server returned an error: (404) Not Found This is unusual since it works when pasting it in my browser. Not sure if code is needed to posted but let me know if so.
View 1 RepliesI've got this
Public Function VendorIdOf(ByVal SimpleId As String) As String
Dim result As String = Nothing
Using drc As New SqlCommand("Select VendorId From Vendor_T Where SimpleId = @SimpleId", _connection)
[Code]....
"Object reference not set to an instance of an object."
Why is that? I would expect a null value to be returned if the row does not exist.
Also - out of curiosity - how come this can be written two ways?
result = drc.ExecuteScalar().ToString()
or
result = drc.ExecuteScalar.ToString
What's up with those paren's?
I am printing my form by using the printdocument of VS and the printform found in powerpacks. I never got the preview to work so when ever I want to print I send my information on a new form (form1) which I have altered ( colour borders ) so it is printable. To print form1 I have added a toolstrip with a print button so when the user sees all is ok on the form1 he clicks on it which hides the toolstrip and prints form1. All this sequence works fine. The problem I have been getting lately is that I can print on the first try but when I call another form to print the toolstrip ( with the print button ) is always hidden. I have to exit the application and re enter to get it to show up. Any solution to this or even how to print in a better way. (have the preview to work for example ). I have tried to use printdialog to print but I have never been able to send the document to print.
View 4 RepliesSometimes webbrowser goes to page not found and stops. Is there a way to do if it's page not found do refresh!
View 1 RepliesI have added bat_fix_w7.reg as a resource file, with binary type, now when i run the code it gives me err System cannot found the file specified, but when i checked my F: drive the file is there than why 2 line is generating err.
My.Computer.FileSystem.WriteAllBytes("f:FixBAT.reg", My.Resources.bat_fix_w7, 0)
Process.Start("regedit /S f:FixBAT.reg")
I want to add hex data to regedit.
My.Computer.FileSystem.RenameFile("New FolderBlank.txt", "New FolderBlank1.txt")
Try
Catch ex As Exception
[code]....
How would I change the following code so that if the process isnt found, it will pop up a msgbox
[code]...
I have a program that looks for a file named 'license.dat' upon startup. The program first checks the directory it's in, and if the license file isn't there, it prompts the user to select the license file with a file browser dialog. I have tested this code and confirmed it working in a number of different OS environments.Recently, I received reports from two users (one in Germany and one in Italy) that the program can't find the license on their computers, even though it is present in the program's directory and they manually selected it with the file browser dialog. The only commonality I'm seeing here is a lack of English OS, but beyond that I'm stumped.This is the code I'm using:
If System.IO.File.Exists(System.AppDomain.CurrentDomain.BaseDirectory + "license.dat") = False Then
File dialog code goes here
[code].....
I have following code somewhere in my VB.NET 2008 program to create an array of files found in a folder:
Dim objFolder As New IO.DirectoryInfo(strXMLImportPath)
Dim arrXMLFiles2Import As IO.FileInfo() = objFolder.GetFiles("*.xml")
...
UpdateFileQ(arrXMLFiles2Import)
[Code] .....
When setting "option strict" to on, I'm getting following error on the line:
lbFileQ.Items.AddRange(dirlist)
Overload resolution failed because no accessible 'AddRange' can be called with these arguments:
'Public Sub AddRange(items() As Object)': Option Strict On disallows implicit conversions from 'System.Array' to '1-dimensional array of Object'.
'Public Sub AddRange(value As System.Windows.Forms.ListBox.ObjectCollection)': Value of type 'System.Array' cannot be converted to 'System.Windows.Forms.ListBox.ObjectCollection'.
Although everything works fine with option strict set to off, I'd like to correct this problem. Also note that array "arrXMLFiles2Import" is used later on in the program, so I can't change anything on that.
I'm creating a search application that needs to have a fuzzy search. Basically if there are 0 results, I need to provide a suggestion, much like google. For example, if I type "Californea", I need my program to suggest "California" after doing a query on my DB for similarity.
View 12 RepliesIm trying to publish a project but im getting this error.An error occurred while signing: Failed to sign binReleaseapp.publish\setup.exe. SignTool Error: No certificates were found that met all the given criteria.
View 1 RepliesI found a custom ListBox that, strangely doesn't have an InsertAt method and I would like to add one. The custom ListBox uses an object instead of just a list of strings like a normal ListBox. I was curious what the logic behind inserting a new item at a particular index would be.The only thing I could come up with was add the new ListBoxItem at the end, then using the specified index, I could either keep moving ListBoxItem objects to the bottom, with the Add() method, from that index till the ListBoxItem at that index equals the one added, or I could use that index number in a "calculation" till I know I've moved the correct number of objects.
View 14 RepliesUsing VB6 to create a file and then open the file just created fails when run on a Vista client with Windows 2008 Server. The same code will work when run directly on the Windows 2008 Server or when using an XP client. If a Sleep 10000 is placed after the close, the program will work. What is the problem here? The code is as follows:
Option Explicit
Private Declare Function GetTempFileName Lib "kernel32" Alias "GetTempFileNameA" _
(ByVal lpszPath As String, ByVal lpPrefixString As String, ByVal wUnique As Long, _
[code].....
I am trying to populate a datagrid from a .txt file. I managed to do it with the split function Split(sr.ReadLine, " ") when I have all the rows identical with only one space, but the problem I have is that the txt file is not delimited and the "spaces" varies some time. This is a sample of my data:
Col1 Col2 Col3
1 Mary Yes
1234 John Yes
999 Leo No
So my question is how to delimit or split the line based when it finds the next character and ignore the empty spaces. This is the code I have.
OpenFileDialog1.Filter = "Text File|*.txt"
OpenFileDialog1.Title = "Open File..."
OpenFileDialog1.FileName = "test"
[code]....
I'm beginner in Visual Studio 2008. I want to question why VS 2008 doesn't find toolbox input box.
View 1 RepliesI am filling a datagridview with a xml file, sorting the grid based on Column 1 then trying to compare a date in Column 4 against the date in a label using the below.
[Code]...
I am entering the date into the grid, example format(30/01/2011) and writing the grid to the xml file.
I am using VS2008 front end and MySql 5 database When I attempt to run this sproc I get the following error message:"Procedure or function 'Test_sp' cannot be found in database 'EVOLUTION'." Yet the Stored procedure is definitely there.I have tried changing the name of both the sproc and in the sub below but it makes no difference.This is the first time that I am trying to use a sproc and I can't get it right.All other communication to and from the database is fine.
Dim Cmd As New MySqlCommand("Test_sp", Datacon)
Cmd.CommandType = CommandType.StoredProcedure
Cmd.Parameters.Add("@Acl_Key", MySqlDbType.String).Value = "ABC"
Cmd.Parameters.Add("@Acl_Desc", MySqlDbType.String).Value = "My Description"
[code]....
I'm trying to search for text that is known to be in a TextBox.
Once it is found, I want to return the line number it was found on.
Also, I would like to know how to delete all blank lines from a TextBox.
These two problems have been plaguing me for the last 2 days.
Currently I am using this code to check for Firefox on a 32 bit machine
Code:
Dim Firefox32 As String
Firefox32 = My.Computer.Registry.GetValue _
("HKEY_LOCAL_MACHINESOFTWAREMozillaMozilla Firefox 5.0in", "PathToExe", Nothing)
MsgBox("The value is " & Firefox32)
If the value is found then the above message is fine, but if the entry is not found I want it to display a message like: "Firefox could not be found" instead of "The value is: " What code would make this appear?
[Code]...
(using vb.net) On our intranet site we have an app that loads customer or vendor information and then allows the users to edit info and add/update/delete contacts. I'm not sure what really changed to this program lately, but I keep getting this error:
Method not found: 'Int16 DBLayer.DBTools.ExecuteNonQuery(System.String, DB)'.
This occurs when i try editing any customer info and the vendor contacts, but the program works when I try editing the vendor info/addy. Here's the program code. There's a seperate program on our webserver that contains the classes used. Here's the main code that calls the classes:
TO ADD CONTACT
M2MInterface.M2M.Customers.AddContact(Session("CustVendID"), txtFName.Text.ToUpper.Trim, txtLName.Text.ToUpper.Trim, Tools.RemovePhoneNumberFormat(Phone), Tools.RemovePhoneNumberFormat(Fax), txtEMail.Text, txtNotes.Text, False)
TO UPDATE CONTACT
[code].....
i have 2 computers - a Server and a Client pc which is running on local area network with MICROSOFT SQL SERVER 2008 R2 Developer kit at the main pc and Client computer will need to connect to SQL SERVER at main pc using connection string.Let me named server computer as 'MAGNA-PC' and the client pc as 'LAC-PC' and database name is 'db_referafriend' so the code for MAGNA-PC(server) connection string is:[code] i GOOGLE and YOUTUBE for almost 2 weeks before i post . I know that i need to configure the sql configuration manager and enable tcp/ip also add a new port at firewall to allow remote connection also add the sqlserver.exe and sqlbrowser in firewall and I have also chosen "Using both TCP/IP and named pipes" under Remote Connections in the SQL Server 2005 Surface Area Configuration. and all of this doesnt work!
View 10 RepliesI am trying to run a fortran .exe in VB with the Shell() command. The fortran .exe, when ran, it asks you for a file name. It works perfectly on it's own, but when I try calling it through VB Shell(), it does not work.. (i.e. I cannot get VB to get the file name in it.)
Added info:I am using VB9 but I'm writing in compatibility to .NET. As for the Fortran .exe, when you call it, it opens a command window where it asks for a file name (which I got as a string in VB and I'm trying to pass it in), then you press Enter and it's done. Basically the .exe takes a text file and creates a new text file. We've also tried adding & mystring when calling the exe, but it gives a "file not found" error.
Ok so I basically wanted to make a simple console app and i wanted to execute its function from Run
VB.NET
Sub ConvertTest(ByVal Link As String)
MsgBox(Link)
[code].....
I am trying to load a pictue into a picture box by using code but it keeps saying it cannot find the picture. This is what I have
PictureBox1.ImageLocation = "E:100_2838"
PictureBox1.Load()
I go and find the picture on my computer right click on it and find its location and copy and paste it into the .imagelocation adding a and the picture name and every time it says picture cannot be found? I have tried loading it from C: or from my jump drive E: