How can I add a loop to this sequence to make the program give a total of the figures in the domestic and international columns when the word "ALL" is typed into the month textbox, instead of a number. The domestic total should go into the domestic textbox, the international total should go into the international textbox and the total of the domestic and international should go into the companytotal textbox.
[Code]...
How can I add a loop to this sequence to make the program give a total of the figures in the domestic and international columns when the word "ALL" is typed into the month textbox,instead of a number. The domestic total should go into the domestic textbox, the international total should go into the international textbox and the total of the domestic and international should go into the companytotal textbox.
'Basic Info:
'Month Domestic International
'1 100,000 150,000
[code]....
I am working with VB 2008. I want to be able to run this program say in N: and it will show me in an excel sheet the following:
Folder Path Size(GB) Count of Files
N:Clients 0.53 308
where clients contains subfolders and files and the size is the total of all those files within each folder and the count is the total within each folder also.
This works fine as it is but i have to select one by one the top level folders and some of them are huge so it takes forever to give me an answer.
1) I would like to see in my spreadsheet the following by only select the network drive n:
Folder Path Size(GB) Count of Files
N:Clients 0.53 308
N:Software 10.7 15430
N:Billing 0.98 105
2) I would also like to know if this is the faster method.
3) I tried adding a progress bar so that the user can have an idea of how much this will take but i had to remove because it was not working.
4) I would like to see the folder name, size of folder and count of files in the listview.
Here is the code:
Imports Microsoft
Imports Microsoft.Win32
Imports Microsoft.Win32.Registry
Imports System.Collections
[code].....
I'm trying to add all of the totals within a list box, which would then be displayed in a label.[code]
View 3 RepliesIs there any way to create a total row at the last of grid view without using loop
I mean if I want to get the sum of a column of a datatable then can I do it without using loop.
I am trying to filter a dataset by adding together numbers within a specified field (say field1) within the dataset until i reach a specified number.
The filtered dataset should either be precisley equal to the number or most likley less than. In short if a row exceeds the number it should revert to the previous record.
I have no probs with general filtering and using data adapters to access the data. But im struggerling with the loop side of things.
I have a class project that I have been working on for a while, and I can't figure out how to add each cost from lstCosts together to show a total cost of the selected workshops in lblTotalCost. Using the current loop that I have, it only adds the last cost in lstCosts. Is there a way to add the indexes together?
Code:
Public Class Form1
' The registration fee for each workshop
Const intSTRESS As Integer = 595 ' handling stress
Const intMANAGEMENT As Integer = 695 ' time management
Const intSKILLS As Integer = 995 ' supervision skills
[Code] .....
How do I code the total cost to give me a pound sign with the total cost at the moment when the total comes up for an example it gives me 3.6 when I need it to show £3.60 here is the code I have so far. [code]
View 2 RepliesThe pay rates for the project are:
a. Level 1 - $10.00
b. Level 2 - $12.00
c. Level 3 - $14.00
d. Level 4 - $16.00
e. Benefit Deduction Rate - 0.10
f. Overtime Factor - 1.5
For ease of program maintenance, all of the above rates and factors must be stored in module level constants. All references to pay rates in the program must refer to the module level constants.
When the Calculate button is clicked:
a. The value in the Hours text box must be validated to insure that it is numeric value greater than zero.
1. If the value is not valid, a message box must appear as shown below and the user must be offered the option to continue processing or quit the program.
2. If the user chooses to continue processing, the focus must be set to the Hours text box.
3. If the user chooses to quit, the program must close immediately.
b. If the value is valid, the program must calculate and display the total pay in the Total Pay label.
1. The pay rate is determined by which Job Grade radio button is checked.
2. For hours less than or equal to 40, the total pay is the hours times the pay rate.
3. For hours greater than 40, the total pay is 40 hours times the pay rate plus the hours in excess of 40 hours times the pay rate times the Overtime Factor.
4. If the Full Time radio button is selected, the total pay must be reduced by the Benefit Deduction Rate.
5. The value displayed in the Total Pay label must be formatted with a dollar sign and with two decimal
places.
6. The focus must be set to the Hours text box.
Why i get an error when i try to run this code
Code:
Also the message box, both yes and no close the program.....
I am using visual basic 2008 amd creatomg a datagrodview format like below [code] Now I wnat to get total balance in total column after less discount in percentage with ENTER EVENT proceedure and get the whole total column balance in a textbox i.e Net BalanceTextBox. Please tell me how to calculate discount in percent % and get total in total column and also tell me how to move cursor in next cell instead of bottom row in datagridview.
View 2 RepliesI have 3 columns in a unbound datagridview, "length" "height" and "Total". Total = length x width and the final total in TextBox outside of the Grid. I found question simalar in this forum and tried the code but i am getting errors.The following is the code i am using
Public
Class Form1
Dim UnboundColumn[code]...
Does anyone know why the domestic figure is showing up in both the domestic and international textbox? And why the totals of the domestic and international figures keep coming out to zero? [Code]
View 4 Repliesi was just wondering how i would do this task. It seems fairly simple but i dont no how to to do it. In my system i have a table where i have a total figure of the stock. what i am trying to do is when my saler order takes 5 i want it to project this in my overal amount. How would i do this. I am not asking for codes just a method of doing it
View 6 RepliesThis DEMO will stop itself after a short while,Warning to anyone with photo-epilepsy, it is a bit flickery!!Do you see the peaks as moving clockwise or anti-clockwise from the top?!!ow i am looking to do this without hogging 100% CPU time in a DO LOOP.I would also like to use SetPixel but that is only available with a BITMAP.
View 1 RepliesBelow is my code which is almost complete. The only thing that I need to do is set up an autoupdate feature that keeps an ongoing average of each temperature that I enter in. I have no idea how to do it!
Option Strict On
Imports System.Convert
Imports Microsoft.VisualBasic.ControlChars
Public Class Form1
[code]....
I'm trying to do something that is turning out to be out of my league at the moment. I need to draw geometric figures. These geometric figures have all the coordinates of their corners. Say I have a trapezoid, and I would want to draw it. The drawing would be done in a picturebox or a panel or a groupbox (some part of the form where only the geometric figure will be).
I saw the method on how to do that Here and that's exactly what I'm trying to achieve, but there it's drawn on a newly created form, and I need it in a picbox, panel or groupbox as I mentioned above. I also need the drawn figure to be at the center of the picbox/panel/groupbox.
The coordinates of the lines should be like (xa.text,ya.text) to (xa.text - xb.text, ya.text + yb.text) if I'm not wrong for the first line of the geometric figure and so on.
I am trying to input a text file of figures into a 2-dimensional array. I want to do this so I will then perform percent changes on the respective columns. The text file contains columns and then numerous rows for each columns each number is separated with a tab. The text file looks something like this.
2.2 5.5
3.7 6.3
9.2 9.1
So I need to be able to input the text file, turn it into an array and then find the total percent change. From 2.2-3.7-9.2
I'm currently trying to write a really simple game on which the player has to pursuit some figures on the screen. Since i'm just writing the prototype version i'm using a Panel wich i redraw 1000 times per second. Now, i want that every level is similar but not the same as past level, so i created a Level Class that contains the game objetcs of Player Class and the Figure Class, wich are the ones that have all the movement subrutines. So, with a Timer, 1000 times per second, i get the input from a joystick, pass it to the player objetc and update the position of the figure object. All this stuff is reported to an internal Panel that every level object has, wich i refresh and then pass it ByVal to the panel that the player actually sees. The problem i have is that after the first level ends, when the second level starts running, i can see the last frame of the fisrt level flashing behind the figures and it makes the game run a bit slower after every level. I tried keeping a copy of the inicial state of exterior panel and use it to clean the one i'm using on the levels but it didn't work...
View 11 RepliesHere's my situation: I'm tryring to build a very simpe minigame in which the player has to pursuit and catch certain figures on the screen. This figures are currently showed as images on PictureBox wich i pass ByRef to some classes where the movement subrutines are. I have all the graphics in PNG, with transparent background, format and they look fine on the background, but when 2 or more of this figures are over the same place on the screen every PictureBox covers the underlying figure, so all i can see is one figure over the background.I was wondering if theres a way to solve this... Maybe using more powerfull libraries or something like that.
View 4 RepliesI'm new to forums as well as new to VB 2008. I'm in process of making a order calculator which will total any values you selected in combo boxes/checkboxes and then display it in a selected area. There are 3 things that I want to achieve: 1. Be able to add another total to an existing total (currently I'm able to see only one total when I hit "Calculate" button)2. Display how many orders I have made so far (new total counts as one order)3. Be able to add up checkboxes selected to an overall total. (when I try to add up one checkbox with another it seems to be stuck on 1.5 pounds which I assigned for each "side order")
View 4 RepliesI'm doing a web application in which the user must make a series of figures such as rectangles, text boxes and lines, Is something like like google docs draw
View 2 RepliesMakes the following statement about the code below:
**"The computer evaluates the loop condition in the Do...Loop statment to determine whether the loop instructions should be processed. In this case, the inputsales <> String.Empty condition compares the contenst of the input sales variable to the String.Empty value. As you know the String.Empty value represents a zero length, or empty, string if the inputsales variable is empty, the loop condition evaluates to True and the computer process the loop instructions. *If on the other hand the inputsales variable is not empty, the loop condition evaluates to false and the computer skips over the loop instructions.
Based on the code I think it is the opposite: ...that while the inputsales value is not empty it should evaluate to true and process the loop and if it is empty it should evaluate to false and skip the loop?
See below.
Option Explicit On
Option Strict On
Imports System.Globalization
[CODE]...
I am working in a point of sale system in Vb express 2008. I want to convert the Amount in Figures to Words like: How to conver the amount of $ 1,550,325.45 to Amount in words as DOLLARS: ONE MILLION, FIVE HUNDRED FIFTY THOUSAND, THREE HUNDRED TWENTY FIVE AND FORTY FIVE CENTS.
View 2 RepliesI am working in a point of sale system in Vb express 2008.I want to convert the Amount in Figures to Words like:How to conver the amount of $ 1,550,325.45 to Amount in words as DOLLARS: ONE MILLION, FIVE HUNDRED FIFTY THOUSAND, THREE HUNDRED TWENTY FIVE AND FORTY FIVE CENTS.Please advise how to code for that in Vb express.
View 5 RepliesI am developing a small application with VB 2008 and MS SQL 2005. For reporting using RDLC reports. Everything is going well except page wise total.I need page wise total on each page and each(all) page wise total should be displayed on last page. I need the report output like this.
SrNo. Amount
1. 200
2. 200
3. 200
[code]....
Note : No. of rows/page are not fixed.For group Total I have used Sum function of rdlc table with scope table_Group2 & for Grand total I have used Sum function of rdlc in table footer with dataset scope.For page wise total I have used textbox in Report footer (=Sum(ReportItems!amt.Value). How to get page wise totals on last page again.
I know I am missing the obvious. I would like a label to show how many cycles in loop are left.
[Code]...
I am constructing a program, i am new to Visual Basic, but i have past programming experience. I was wondering if anyone knew how to form a loop that could...lets say calculate the answer when two numbers are added together,and it would repeat this thousands of times, etc. And if there is a way, would it be possible to calculate the time taken to complete this loop.
View 5 RepliesI have written a function that gets the alexa ranking of a given url, now this function works perfectly but I want to loop through a ListView of urls and grab the alexa rank of each item (url) with my function.The code works great if I put a MessageBox in the loop to test that the function is returning a value but when I remove the MessageBox the loop does not work.I need it to loop through adding each result without a MessageBox stop in each loop.
vb
For Each Item In ListView1.Items
Dim result As Integer
result = GetAlexaRank(Item.Text)
[code].....
So I made a simple patform game where the player has to jump quickly while the platforms move to the bottom of the screen, as to not touch the bottom of the screen. But, I need to know how to create a loop to loop the locations of the platform. This means that after twenty or so platforms, the same platforms come up again, so that the player will have an "endless" game. I've declared all the platform's locations relative to the location of the first repeating platform:
[Code]...
I assigned an integer as 1, and looped my program using:[code]I can recieve the packets without looping, but once i loop, i receive nothing.
View 29 Replies