Making An Application Install To Be Used By Mutliple Users?
May 30, 2009
I created a simple application that when a user logons onto their Windows account, the application pops up to display the computer usage agreement.آ The user at this time has the option of accepting it or declining it. If declined they are logged out of windows, and if they accept they can continue using windows. When I installed the application logged on as the administrator, it only installed in the administrator profile, thus not allowing the application to be run from startup under any other account except admin.آ My first question is, how can I install this application that is it accessible to all user accounts? The second question is how can I program the application to freeze windows until the user clicks the accept button, without puting a timer event that if the accept button is not clicked in a certain amount of time to log off the user.
View 2 Replies
ADVERTISEMENT
Apr 17, 2009
I wanted to know how I can make a stand alone exe without making the user install the application. So that the program can be ran from a disk or flash drive. Currently I can run it just fine on the PCs, I'm developing it on. But when I take it to another, that has the targeted framework, it crashes.
[Code]...
View 24 Replies
Oct 9, 2009
he wants it to install for all users of the PC..do I control that ? or do you just change the install path tonot me the local users when you instal
View 7 Replies
Apr 3, 2012
1.I�d like to publish a free vb.net desktop application for the users to download and use meanwhile I�d like to collect usage information ex: user ip address, user�s registration information, used features, time spent� if the user allows the report to be sent back.
2.Also , in order for the user to be able to use the application, he�ll have to register it then, everytime, before the application loads, it gets verified online that it was registered, maybe validate the registration information or a valid user name and password, no critical personal information. The target of this step is for the application to be used exclusively by the registered user and maybe on his computer only.
View 2 Replies
Apr 4, 2012
1. I�d like to publish a free vb.net desktop application for the users to download and use meanwhile I�d like to collect usage information ex: user ip address, user�s registration information, used features, time spent� if the user allows the report to be sent back. 2. Also , in order for the user to be able to use the application, he�ll have to register it then, everytime, before the application loads, it gets verified online that it was registered, maybe validate the registration information or a valid user name and password, no critical personal information. The target of this step is for the application to be used exclusively by the registered user and maybe on his computer only. Any alternative way to achive the target is just fine.
View 1 Replies
Mar 30, 2010
With the on-line one click install feature will the application install on a MAC?
View 2 Replies
Aug 27, 2010
While trying to install my application, when system tries to install .Net Framework, it gives an error.Is there any source where I could download uninstalled .Net Framework 3.0 and provide my clients with application?
View 1 Replies
Aug 9, 2009
I want to make a extractor/installer for example the users will press Install and it will extract myprogram.exe at C:/windows/system32/ automatically when they press install.
View 7 Replies
Mar 19, 2009
i need to send strings to another application and OK Clicks and all that but i dont know what to use or where to find the resources.
View 2 Replies
Jan 31, 2011
I am making program that will show Original system install date and calculate how old is system...How can I code that in VB 2010?
View 3 Replies
Jul 8, 2009
I'm making a setup project for my application. I have a file, dbconnection.xml, that I want to be installed to C:Program filesmyAppdbconnection.xml regardless of where the user chooses to install the application. I've added the program files 'special folder' and have a subfolder, myApp, under that where I place this xml file.
For whatever reason, no matter where the user installs the application to, the XML file is placed in the install directory, not in c:program filesmyApp.
View 3 Replies
Jun 8, 2011
I have designed and published my small created app with WINDOWS FORMS using VB 2010 EXP on Windows 7. I can only install the app on the machine that I used to develop the app.I want to install the app on another computer but I cannot. I usually have error reports.
Example:Unable to install or run this application. This application requires Microsoft Common Language Runtime 4.0.3 to be installed on your computer.
what can I do to be able to install the app on a different computer which does not have .Net and does not have visual basic 2010 installed.
View 13 Replies
Jun 16, 2009
Are the below two queries functionally the same?The first one doesn't return any data, but the second works fine with same exact input.Can someone point out what's wrong in my first query? [code]
View 2 Replies
Sep 9, 2011
I am converting an ASP.Net web forms project to MVC3. The master page contains multiple content place holders at different locations.I replaced the first content place holder with @RenderBody() but I am confused with what to do of the second one.
One approach might be to separate views and place a @Html.RenderAction() for each content place holder method.
View 2 Replies
Jul 29, 2010
I have a lot of forms set up, probably about 10-15 so far (more to come). Some forms 'lay' on top of other forms, and each form contains multiple controls. I am discovering that my approach is not very likely to succeed in what I am thinking of doing.
Here is one example: LeftControlPanel form contains 5 controls, but 5 other forms 'lay' on top of it and use transparencies to load up bitmaps. Since I cannot parent the forms that 'lay' on top of the form, I cannot figure out a good way to move them.Is it logical that when I move LeftControlPanel to a different x location, I would just move all the forms that 'lay' on top of them as well?Seems like a clunky approach of moving one form since parenting the transparency forms will remove all the transparencies that are set up...
Is there a bit better logic I might be missing, or bite the bullet and start moving multiple forms at once?
View 1 Replies
Jul 26, 2010
I am new to VB and have built an application that contains a textbox and a couple comboboxes which allows users to enter vaules. These values are passed into sql procedures. I would like to put this SQl process into a backgroundworker to free up the GUI.[code]
View 6 Replies
Oct 18, 2010
i am wondering if there are any case studies / white papers available comparing web applications to remote desktop applications on running on comparable hardware? What I am trying to get at is if a web application can support more users, as far as hardware resources go, than the same windows based application running on terminal services?
View 3 Replies
Jul 3, 2010
I've created a news ticker control, which reads from RSS feeds and scrolls the text Horizontally. The plan is to have 3 of these on my Windows form, which will each display their own information.
The control is created as a label, which is populated with the text, and then scrolls right to left using a timer, once the label gets to the end of the text, and disappears of the left side, the rss is re-read, and then the cycle resumes. The problem is that with multiple copies of this controls on my form, once one gets to the end of it's run, all three freeze while the rss is reread, rather than just the control that needs to do it.
Is there a way to run each of these controls independently (threading?)? Or is there a glitch in my code causing this? (below - some elements not included, but it should be fairly obvious what is happening!)
[Code]...
View 7 Replies
Nov 25, 2009
How can I paste a multiple line text into a single cell?I tried sendkey {F2} but Excel does not run macro in edit mode.
View 1 Replies
Jun 21, 2010
I am very new to VB.NET. That said, I have developed a windows form that utilizes an SQL Server back end. I am developing using Visual Studio 2008 and the 3.5 Framework. The SQL server is 2005.I do not have any warnings or errors, and the project compiles without error. When I run the install package on another computer, everything appears to install correctly, and the shortcut is placed on the desktop. However, when opened, the cursor goes into wait mode for a few seconds then returns to normal and the form does not open.I am using windows authentication for the SQL server, and the user of the other computer is the owner of the database I am developing for, so that person has access. I am using the following when making a connection to the SQL server: Dim cnnSQL As New System.Data.SqlClient.SqlConnection(My.Settings.ConnectionString)
View 5 Replies
Feb 11, 2010
Problem in installing my application
View 9 Replies
Oct 26, 2011
The publish folder contains three items.
A folder titled 'Application Files' A file which is after application named followed by the extension of 'application'A file titled setup.exe
I expected that I would only have setup.exe. Or is this how things go with Visual Studio 2010? Anyway, if I take this package to another computer and double-click on setup.exe, the application will be installed at the following path:
C:Users(account name)AppDataRoamingMicrosoftWindowsStart MenuProgramsMicrosoft
Is that an appropriate path where an application should be installed? How can I make it so that the application will be installed at C:Program Files(application name) ?
View 10 Replies
Dec 14, 2009
I am making a exe application and i am using mysql as my database. So the thing is, when i change to a new computer, i need to change the file path for the database connection string to that computer.
like below:
Dim connectionString As String = "Data Source=----------SQLEXPRESS;Initial Catalog=Flexlink;" & "Integrated Security=SSPI;"
i need to change the data source = --------------- SQLEXPRESS to the computer name that i am using for my project.
May i ask is there any method such that the user dont have to go in to the source code to change the computer's name like those normal installer?
Just install and the application will run according like any exe file that we buy.
View 1 Replies
Sep 16, 2010
I have an vb.net application that I want to install on other Computer. The backEnd is SQL server. so the error is on other computer (Provider :: SQL NETWORK INTERFACE ERROR 26 -error LOCATING SERVER, INSTANCE SPECIFIED)
View 2 Replies
Aug 7, 2009
when i m instal my application to other computer its Require Dotnefx3.5 and Windows instaler its require internet to download missing componant to install Before running my application so how to install my application with these other component (who need my application)
View 24 Replies
Mar 13, 2011
I have made a rendering application and it NEEDS dx9c to run... so i want to add dx9c install into my setup project, so when the application installs after the setup has installed the main application it will then install dx9c, I have a folder in my data folder called dx9c with full runtimes inside and the dxsetup.exe, I have tried making a custom action and pointed the action at the dx9c/dxsetup.exe from the data folder into commit folder but this errors on when launching the dxsetup.exe "invalid command line" and uninstalls the whole application.
View 1 Replies
Apr 19, 2010
I have a VB.NET 3.5 Win Form app that I want to put on a CD and distribute. I don't want the application to install since it is only going to be run a few times ever by a user. So is there a way to just run the application from a CD?
View 2 Replies
Jul 18, 2011
Using VB.Net 2010 (not Express)I'm at vthe point where I'm starting Beta Testing. I createds the build and then a publish (to a network share).Now the testers are getting an error during install complaining that "System Update Required"...Unable to install or run the application. The application requires that assembly Microsoft.VisualBasic.PowerPacks.Vs Version X.X.X.X be installed in the Global Assembly Cache
View 2 Replies
Mar 15, 2012
I need help with regards to application distribution. The application i have made is in vb.net with sql server as database. I have 2 laptops . i want to install the application on both computer So that one computer will be for administrator and other for employee.
View 3 Replies
Aug 26, 2009
I am trying to figure out what all the files do so that I can use Inno Setup to create an installer. y plan was to install all the files to a temp folder. Then run setup.exe.However, I was not sure what to do about the uninstaller? Inno will want to uninstall as well, which I think I can have it run a file on uninstall. So I was thinking maybe I should put some or all of the files into a permanent folder instead of
setup.exe
laptopTracker_1_0_0_13.application
laptopTracker.application
[code].....
View 10 Replies
