Panel Sliding And MouseEnter ?
Jun 10, 2011
I am having two issues with making my Maze Game in VB.NET. I want the levels to be difficult to solve so I am making some *sliding* (NOT MOVING) Panels to interrupt the players.These are my problems:
1. I want the Panel to slide (Sliding Up and then Down, then Up and Down, then Up...) forever, but it doesn't. It will only slide the times I have written the code.
2. I want the MouseEnter event to work when the mouse touches the Panel during the Panel is sliding.
3. Is it right to use a Timer?
Here are some details and the codes which I have used:
I have first made an Integer = 6 for the speed of sliding.The timer is not enabled and started. It will be started and enabled when Button1 is clicked.
Timer's interval: 100
Panel's name: Panel1
Timer's name: Timer1
When the user clicks Button1, Timer1 starts, which will slide Panel1. (My code is for moving the panel. I need to slide the panel. IT'S WRONG![code].....
View 3 Replies
ADVERTISEMENT
Jan 20, 2011
I have a panel that I have made double-buffered so that any controls on it don't flicker when it slides in and out from the left side of the form.The problems I'm having is:SOLVED When the MouseHover event is triggered, the panel doesn't slide out, it goes from its initial size to its full size without incrementing.SOLVED The MouseLeave event is triggered when I mouse over any control inside the panel.
The MouseHover event of the panel:
vb
Private Sub pnlMenu_MouseHover(ByVal sender As Object, ByVal e As System.EventArgs) Handles pnlMenu.MouseHover
If blnDocumentsMenuExtended = False Then
Do Until Me.pnlMenu.Width = 28
[code]....
View 5 Replies
Apr 13, 2011
In my application I have 4 panels. Each of which have a "mini-app" such as a calculator, sticky notes, etc.My GUI could use improvement so I had an idea of making the Border of a panel glow where if your mouse enters or focuses on the panel or its children the border glows.I have not yet worked with glowing type elements and am not sure how I would do this. I just want the border to glow like the Start button at the bottom left corner of your screen in Windows 7. The start button glows on mouseover and focus. To my knowledge I believe they just use two images, but how did they use the animation for "glow effect"? [code]
View 8 Replies
Jun 6, 2009
I need to center the red panel in the middle of the dark grey panel, when you resize the form the red panel should be in the middle, and the red panel can't be resize, anyone have a code or property to do this?
View 2 Replies
Apr 23, 2009
My tabcontrol is in the center of my winform.I need to get the control to smoothly slide to the form's left border on button click.
View 2 Replies
Feb 20, 2010
I have a Form called 'Form1' and I want an addition pane/panel that slides over the Form from left to right which has additional controls on it. But I cant get the desired result.For example - the exact thing I need is in the .NET environment you have many sliding panels such as the 'Toolbox' that slides over on the Form. I want this exact replication so that it slides over 'Form1' from left to right when the user hovers over it
View 2 Replies
Nov 23, 2009
I have a Form I have alot of controls on it. Some of the control I want to place inside a sliding pane (somewhat like a docking pane thats the same as the "Toolbars" sliding pane in .NET) how can I add one of these sliding panes to my Form?
View 10 Replies
Jan 25, 2011
I'm having problems with sliding a variable sized window over a 2D array in vb.net. my porblem is when I take the first element of the array at 0,0 what ever the size of the window is it needs to be smaller because the element in question has to be the center of the sliding window. ex: arrar size(40,43) window size 5x5 ( window size is NxN N=3 wins size is 3x3) so array(0,0) with win size 5 so 2 col and 2 rows need to be cout out and a new window size of 3x3.
Public Function getPIXELSinWINDOW(ByVal Wsize As Integer, ByVal x As Integer, ByVal y As Integer)
Dim tempARRAY As New ArrayList()
Dim Xwidth As Integer = Wsize[code].....
View 1 Replies
Mar 17, 2009
i have a panel which in runtime would slide to show it.. but the animation seems not visible...
Dim intanimate As Integer
Private Sub btn_delete_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btn_delete.Click
Me.Label7.Text = "Delete Criminal Record"
[code]....
View 4 Replies
Mar 19, 2011
I am making a TabControl with different textures and a sliding look. But I am having trouble with following points :-
1. How to make buttons click able at Design time, so as to switch to different tabPages [which are panels in this case]
2. How to add a property ex. TabPages() as Panel collection Editor [like TabPages Collection editor in case of TabControl]
I tried,
Public ReadOnly Property TabPages() As List(Of Panel)
Get
TabPages = p
ref()
End Get
End Property
Where p is another List of panel and ref() checks new addition of control in p -> adds it to UserControl.
3. How to get the upper-right corner arrow to quickly add a tab in Design mode.
View 6 Replies
Oct 17, 2009
OK, if any of you use Facebook, you'll know what I mean, you click Share after you type in what you want, and it pushes everything else down, fades in, and slides. I need that to happen, and I need it to happen with labels because I can get the code for a textbox to work, but without the awesome effect.
View 2 Replies
Mar 15, 2012
I am looking to add a sliding drawer effect in a Winforms project.To explain myself further, I am looking to have a tab on the bottom of my form, then when the the tab is clicked the rest of the tab or tab control is shown. Any ways on how to do this or even having a docked tab will work as long as the docks/tabs width does not span across the whole form like all the other examples I have seen.I seen an example of a sliding panel when clicked by a button although I cant find the example anymore.
View 2 Replies
Mar 30, 2012
I need a 'low-coded' way on how to use 'MouseEnter' and 'MouseLeave' event (in Visual Basic 2010) on a Web Browser, but strictly as OBJECT. So I don't need any of those HTML stuff... I just want one small Web Browser to dissapear when I take my mouse off him...
View 1 Replies
Feb 28, 2007
I want to change the default row backcolor when either the MouseHovers over it, or Mouse clicks on the row, then return it to the default color when the mouse leaves.
View 4 Replies
Nov 19, 2011
I'm trying to make an image fade in/out when the user hovers over the button. The fadein works when I enter the button but not when I leave it. How can I make this work?
Animation Code:
Private Sub GreenBg_animation()
Dim myduration As Duration = New Duration(TimeSpan.FromMilliseconds(250))
Dim da As DoubleAnimation = New DoubleAnimation
da.Duration = myduration
Dim sb As Storyboard = New Storyboard
[code] .....
Button code:
Private Sub btn_2_MouseEnter(sender As Object, e As System.Windows.Input.MouseEventArgs) Handles btn_2.MouseEnter
GreenBg_animation()
End Sub
View 1 Replies
Dec 9, 2011
I wonder if I can pack the following MouseEnter events into one.
[Code]...
Onion is a recent refuge from Mac OS X and hates Mac App Store. System: Windows 7 x64
View 2 Replies
Dec 2, 2011
I have text for ToolStripStatusLabel1.Text in a file which is read into an array.
There is an array of PictureBoxes, which are used for the MouseEnter event.
I am trying to display different text in the status when the mouse is over a certain image. In the code below, the Array.IndexOf() generates "Index was outside the bounds of the array.". The commented line will change the text when I change the Index but, it changes it for all images.
View 2 Replies
May 25, 2010
I'm trying to make my application become the active window if it currently isn't as soon as the mouse enters the main form of the application (so there is no need to click the title bar of form itself to make the window the currently active one if it's not).
It only sorta/kinda work .... I have to enter the form with the mouse 3-4-5-6-maybe 7 times ... then the window finally becomes the active one.
I know the MouseEnter event is firing each time the mouse enters the app, but the main window isn't becoming active most of the time.
Private Sub frmMain_MouseEnter(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.MouseEnter
rtbStatus.AppendText("Just got a frmMain.MouseEnter event" & vbCrLf)
[Code]....
View 10 Replies
Nov 30, 2011
I have an array of picture boxes with images. I want the status bar to change when the mouse enters the image. I am stuck on displaying the correct text when the mouse is over a pictureBox.
hr1StatusText is an array of text read from a text file. Everything works but I can't figure how to iterate through the text for the status bar.
The code below works displaying the text for all PB's as long as the index is changed. What I am looking for is to display hr1StatusText(0) for PB(0), hr1StatusText(1) for PB(1), etc.
Public Sub Tile_MouseEnter(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.MouseEnter
Dim TileMouse As PictureBox = DirectCast(sender, PictureBox)
ToolStripStatusLabel1.Text = hr1StatusText(0)
End Sub
View 1 Replies
Jun 30, 2010
I'm using MVVM.
<ItemsControl ItemsSource="{Binding AllIcons}" Tag="{Binding}">
<ItemsControl.ItemTemplate>
<DataTemplate>
<StackPanel>
[Code]...
I'm able to capture the command. However, I want to execute the command binding when the mouse enters the stack panel, not when I click a button.
View 3 Replies
May 8, 2011
I want to change the background color of an element when the mouseEnter event fires. How to make the color of the background darker?? I thought I can use an opacity mask, but it's a gradient, but I need it to be solid. Also it has to be in visual basic code, not in xaml.
View 2 Replies
Feb 14, 2010
setting the form opacity programatically in the MouseEnter and MouseLeave events.The problem isn't with the actual events, the problem is that the events occur in places where I don't want it to happen.So in my project, I have a form with 3 user controls in it. The user controls are docked in the form so no actual space from the form is available to the user.
I have the methods:
Form1_MouseEnter(~) Handles Form1.MouseEnter, UserControl1.MouseEnter, UserControl2.MouseEnter, UserControl3.MouseEnter
Form1_MouseLeave(~) Handles Form1.MouseLeave, UserControl1.MouseLeave, UserControl2.MouseLeave, UserControl3.MouseLeave
when you enter the form, the form opacity is set to 1. And when left, the form opacity is set to 0.7 .However, what happens right now is obviously that when the user changes the mouse position from one user control to another, the form opacity flickers (turns to 0.7 and back to 1 really fast).
View 15 Replies
Feb 18, 2011
When i use my UserControl in a project my Mouse Enter & Leave events aren't firing, i assume i fix this with a raiseevents in my usercontrol. However when i try to do this it says something about "cannot raise base event from derived class".
View 7 Replies
Nov 24, 2011
I would like to add an effect where a panel sweeps out of the way to make room for another panel. This is sort of like a sliding effect, and I think at one point in time this could be seen on Apple's website under their product pages. I came up with some code, but it isn't working.
[Code]...
View 1 Replies
Apr 21, 2009
When a user is editing a given piece of data, they're allowed to add messages/comments. These are stored as child records in a SQL database. Clicking on the Add Message button brings up a panel (pnlMessage) courtesy of the AJAX ModalPopup Extender. This takes some input and, when the "Send Message" button in the panel is clicked (I learned the hard way to NOT make that the 'OkButton' property), the message is stored in the database and an email is sent to the intended recipients. No problem there.
However, I need to be able to allow the user to add new email addresses (so long as they are registered in our database). I have another ModalPopup / panel combo (pnlSearch) that's tied to a button on the previous panel (pnlMessage).
The user is supposed to be able to add an email or click on a search button to populate a list to choose from.
The pop-up panel (pnlSearch) comes up just fine, but clicking the "Lookup" button (which instigates the search and returns a collection of records that the user is supposed to pick from) closes the panel.
Previously, I ran into the problem of having the Button.Click event never firing when I put the Button into the "OkControlID" property (the CancelControlID works fine since I don't want to do anything). Removing the "OkControlID=Button" line allowed it to work perfectly with the Button.Click event firing as expected.
So now I have the Search panel with a button for "OK" and a button for "Search" - but the panel should stay up and visible after the Search.Click does it's thing. Am I missing some property that basically says "don't close the panel when this button is clicked"? Of course, if I bring up the panel again in the same session, the results from the previous effort are there (the search results).
View 1 Replies
Oct 4, 2010
I have a TopBar, A LeftBar, A VScrollBar, A HScrollBar and a Panel inside a SplitContainer Panel.The issue I'm having is that when my SplitContainer Panel is small enough to enable one of the ScrollBars, I will slide the ScrollBar and then when I resize the Split Panel, my Panel1 is staying where I scrolled it too.I'm having troubles thinking of the correct code to fix this.
[Code]...
View 1 Replies
Mar 2, 2009
I was trying to move some dynamic control within the parent container like panel or a group box how do i do that?
View 12 Replies
May 8, 2009
I'm working on a visual studio 2008 VB.Net project (.net framework 2.0), and am having some trouble with the Panel control using a fixedsingle border. As a small example of the problem, suppose I have one Panel2 contained inside of Panel1. If the Left position of panel2 is set to 0 (meaning it's border is up against the left edge of Panel1), the left border will show as bold, and slightly indented.
<Global.Microsoft.VisualBasic.CompilerServices.DesignerGenerated()> _
Partial Class Form1
Inherits System.Windows.Forms.Form[code].....
What I'd like to see is just a single line, not bold or indented, where the two panels borders are equal.Is there a property or custom paint technique I could use to achieve this behavior?
View 3 Replies
Jun 18, 2012
i have the following code sliding from the bottom of the main form position to the middle of the main form.
main form
Dim Viewform2 As New Form2
Private Sub Form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Load
[Code].....
View 4 Replies
Jun 18, 2012
i have the following code sliding from the bottom of the main form position to the middle of the main form.
main form Dim Viewform2 As New Form2
[Code]...
no code, just a form thats width 292 and height 266 This code works but its very choppy when the slider form slides up. Also, i am unable to get the opacity correct as well where it fades in and then out when it leaves.
View 4 Replies
