got a property with Localizable set to false however it still appears in the resource file,If I look at his msdn link it says :.. "By default, members that have no localizable attribute or are marked with the LocalizableAttribute se
View 4 RepliesSo i created resource file New --> new file --> Native Resource Template Then added icons with custom id, like "x", "u_100", .. so i understand, what the files (in my case icons) is.. And i saved as 32-bit resource file (*.res) So i have a question, how can i use these files inside of resource file in my apps? i know how to add icons in to my app.. Me.Icon = New Icon(C:/icon.ico)
View 6 RepliesI've set the property for my form to Me.ShowInTaskbar = False, and the app still shows up in the taskmanager.
View 2 RepliesI have a control which validates the data entered and it is working. I created a Close Button and set the Cause Validation property to False. The validation keeps on running even though the property is set to false. As a matter of fact, it happens to all the controls as if there is a bug in VB.Net.
View 10 RepliesCan someone clarify if there is ever a need for the below?
When setting a textbox "Visible" property to False is there any reason why I should also set the "Enabled" property to false.
I am stumped on this one. I have a panel (pnlKeyPad) that won't change the visible property when I try to set it to True. But when I try to set the Dock Property to DockStyle.Fill it succeeds. I have tried them in different orders, setting the parent property to the splitpanel and nothing seems to fix it. The panel is on a splitpanel that is visible. The panel is set to visible = false by default.
Any ideas of why this panel won't switch to visible when I specifically set it to visible?[code]...
In VB6, you can set the Default property of a command button to True / False, and when you push the enter key, it will click the button for you.
What property is this in VBNet / C#?
I know how to turn a control's visible property to true or false, the only thing I don't know is: If I have, for instance, 40 group boxes in which only one is visible, when I click on a button, the first group box visible = false and the second group box visible = true, and when I click on it again, the second group box visible = false and the third group box visible = true, and so on I don't want to write the codes for every controls, since it will be quite time consuming, I want to use fewer codes to achieve this objective,
View 10 RepliesHaving an issue with my data gridview. I've set the visible property of the ID column to false, and in the designer the column is hidden, yet it still shows up when i run it. Now if i set it to True it shows the column twice.
View 3 Replieshow to retrieve the selected row cell value if it is visible property is false in gridview ?
View 1 RepliesI added 7 bmp files in the Resources tab of the Project Properties I have 7 PictureBox controls, for each control I set the Image property to a certain bmp saved in the Resource section.Everything was fine, however all of a sudden I got this warning message for each PictureBox
"The type 'My.Resources.Resources' has no property named 'lla_nodev'."lla_nodev represents the "lla_nodev.bmp" file I added in the Resource The worst thing is that the Form is unabel to load in the designer view, so cannot I modify it. The application is able to run though,with apparantely no problems in run time.
I have a resource file that I include in my shared code library that has all of my re-usable classes in it (all the resources go into their own namespace). Now, what is the best practice regarding resources... should I include them in the same DLL, or should I have a seperate resource DLL and/or are there any benefits from seperating them out into their own file.
View 8 Repliesvb.net 2005 sql 2005 developer.I've done at least 30-40 grids for my clients so i am not exactly new to this.i have an empty bound grid. bound via the drag and drop ide.I click on a button that does an addnew to the bindingsource of the grid.The new row appears filled with empty cells.I want to know how to determine what is the state of the row.
Immeadiately after the addnew, the rows.count is now 1. the value for dgv.rows(0).IsNewRow is false?At this point if i do a bindingsource.canceledit the row dissapears and all is well.If i enter a valid value for some of the rows but not for all of the rows,i hit the uparrow, something happens and the dataerror event is fired. again if i execute a bindingsource.canceledit then the row dissappears and the integrity is ok.If instead of using the up arrow, i click away to lets say cancel button, some strange things begins to happen.The dataerror routine files before the cancel button click event fires.If the row contains valid data then the dataerror event is not fired and the cancel button click event fires.So i am trying to have one button called "delete row".I want it to be able to remove the current row regardless of what state it is in.
If it is still in its add mode then a cancel edit will do. If it has been updated from the grid down to the datatable, then the same is true, a bindingsource.canceledit will work If the row has been pushed out to the sql server, then i have to remove the row in a different way.One such way is to use the datagridview's rows.removeat method.I need to distinguish between a row that is brand new and has not been edited at all from one that is new but has data in it and then the one who has been updated all the way to the server. Bindingsource.CancelEdit and DataGridView.Rows.RemoveAt([currentrow]) are my tools IsNewRow doesnt seem to work.after the bindingsource.addnew, where is the row in the binding source? the Item collection does not have it. The currencymanager.count is still zero?
VB GridView control will not allow code in the vb code file to access a data column that has its visible property set to false. When it is set to true, the data column can be accessed with no problem. Any suggestions as to how to correct this? I have looked through the documentation, text books, and I have not found anything that gave me any clue as to what the problem could be. I thought that the property was just applied to the column, not that it would remove the column from being accessible.
[Code]...
I currently have the following code but I would like to get away from going to a physical location. If I have the icon as a resource, how can I programatically add the icon? I don't want to use the form's designer to do this.
Sub Form1_Load()
Dim ico As New System.Drawing.Icon("C:Resourcesicon.ico")
Me.Icon = ico
End Sub
I want to have a text file perhaps a ini file where I want to set a value to either True or False so a boolean. How can I do something like this. I want it to be a in text file so I can change. If it's in settings I'll need to change each users settings I want each user's application to read this text file.
View 3 Repliescan anyone please explain to me how I get the file path to an embedded video resource file I have?Currently I know how to get this while debugging, but I am unsure how to refer to it when built.It needs to work no matter where the application files are.[code]
View 3 RepliesI have my file imported into the application. And when i try to include it into my application.(EX: My.Resource) It wont work. It wont show up the Data.txt. How would i make it so i can import my file into the source and use the file to
View 1 RepliesI'm trying to output a resource file to a physical file on my hard drive. Here is what I have so far from researching but I think I'm doing it wrong.
Dim ms As New System.IO.MemoryStream(My.Resources.File1) Here is how I would do it in VB6, but I'm trying to catch up with the times and move on to the new stuff.
Dim c() As Byte
Open Sysdir & "mswinsck.ocx" For Binary Access Write As #3
c = LoadResData(103, "Custom")
[Code]....
I'm trying to use a .pdf file I've added to my project but can't figure out how to get it to show using the webbrowser control. Here is what I'm using to call it:
View 9 RepliesI need to refer to some strings using an "indirect string" in the registry. It should be in this form:
@filename,resource
MSDN: "If the resource value is zero or greater, the number becomes the index of the string in the binary file. If the number is negative, it becomes a resource ID."How can I find out either of these numbers for my resources that only have names in VB? I also need the ID/index for the exe's icon.
Is it possible to make sort of an installer where you have your files you wan to install in the Project resurces file and then copy and paste them into a directory?
View 16 Replieshow to running an .exe file that ive benn emmbed into my resource?mean when i click the button it will be open..
View 2 Repliesdear sir i have problem n resource file i develop an alarm clock but the problem is a playing auidio
View 5 RepliesI am preparing a project.I buried my necessary files in the Resource folder.
Now , how can I run a file in that folder?
Right now i have a line of code, in vb, that calls a text file, like this:
Dim fileReader As String
fileReader = My.Computer.FileSystem.ReadAllText("data5.txt")
data5.txt is a resource in my application, however the application doesn't run because it can't find data5.txt. I'm pretty sure there is another code for finding a .txt file in the resource that i'm overlooking, but i can't seem to figure it out.
I have added m.wav as a resource file & now want it to play onstartup?
View 1 RepliesI want to add an xls file as resource to my vb.net project.
I added the existing file and when i write the code which will help the user to download the file , i am not able to see the resource listed in the dropdown .
Dim b() As Byte = My.Resources.abc
System.IO.File.WriteAllBytes("C:abc.xls", b)
MsgBox("abc downloaded in C:", MsgBoxStyle.Information, "Project")
I added a rtf file as a resource in my vs 2008 app. However, when I try to run the program and load the rtf file into the richtextbox I get an error about not being able to find the file. I created the namespace for my.resources and am using the following code to load the resource rtf file:
View 2 RepliesI have added two images as a resource in my project. I'd need to copy these images to a certain folder when the program is started. I'm not familiar about using resources, so far I have managed to set a picturebox to show one of these images like this:
Dim res() As String = GetType(Form1).Assembly.GetManifestResourceNames()
pBoxTest.Image = New System.Drawing.Bitmap( _
GetType(Form1).Assembly.GetManifestResourceStream(res(0)))
But I don't know how to get the url of that image so that I could copy it from it's url to another place.If I now try to find out the location of that picturebox's image I get an empty string: MsgBox(pBoxTest.ImageLocation)This should work in any computer where the program is run so of course I can not just hardcode the path of this resource.