I am using VB.Net to create one radiobutton for each line in a text file.
For i = 0 To SFLines.Length - 1
SRadioButton = New RadioButton
With SRadioButton
.Text = SFInfo(i, 1) & ", " & SFInfo(i, 0)
.Location = New Point(10, ((i + 1) * 17))
[Code] .....
This does not work. I need a Select button that will display some info about the array element based on the radio button selected.
i have problem that i know once someone answers, i will kick myself, but here goes. i need to move the text next to the radio button to the left of the radio button, that part is easy just make sure the the "right to left" is maked yes, got it. but, the problem is i am making a seating chart and the seats are labeled 10-a, 10-b etc.... when the right to left is set to yes my text reverses and becomes a-10 and i can't seem to figure out what is set in the properties the is causing the alpha to be placed before the numeric.
View 2 RepliesI have one radio button and one listbox .i want code for display listbox depends on the radio button check true and false.
View 3 RepliesI need to click a radio button for Metric and have "mm" appear on my form beside a box where the user will enter numbers. I have 3 radio buttons, American "in", Metric "mm" and Decimal "dec". I want the "in" or "mm" or "dec" to appear as text on the form beside the boxes where the user will put in the numbers.
View 1 RepliesIs there a way to set the radio button text to center, I want to show it on the top of radiobutton hole?
View 2 RepliesI have a label.text that generates random words. The user has to count the letters in the displayed word and select
View 2 RepliesI am stuck on how to assign values on a label or text box.The issue is the following:I have two tables, one called A and the second one called B.Table A has tree fields: id, name, lastname...Table B has five fields: id, level1, level2, level3, level4..The idea is to save A.id into level1, level2, level3 and level4. A.id can be the same or not. I know how to assign and save the values on the DDBB using DDL, but when I want to show the values using labels, I get the first value always, this is becuase the select command is configures in that way. If I use ddl instead label, it works, but I do not want to show the value using ddl. I want to use label to show the values, and ddl to modify or add new data into the DDBB.[code] As you can see the level1 uses label, and level2 uses ddl, it was the only way to get the value for level2, otherwise if I use label on level2 it display level1 value instead.I would like to know if there is any way to assign different value using anything but ddl.
View 6 RepliesI made 'quiz' form: 1 question/label and 3 answers/radio buttons, next and previous buttons.Data is from data set. One question and 3 answers are in one row. After next button is clicked, new row is loaded. The problem is when click 'previous' button: instead of text from data base, checked radio button text is 'True'. The same is when the quiz is completed and I want to review mistakes.
View 1 RepliesI have a Radio Button List that lists different business categories. The last option is the Other category. When the user selects the Other category, I want to be able to enable a text box that the user can then enter further information to explain the Other selection.[code]...
View 2 RepliesI have a question regarding radio buttons. I am creating a little prog that has three separate radio button groups. After selecting one button in each group, I would like a text box to display a value. The text box value will be a number between 50 and 350 or so.
View 19 RepliesI'm a beginner so please take it easy on me. I was wondering what the code is for the text of ANY selected radio button to appear in the multiline textbox that is already set up. Is that at all possible? If so, can you do the same for check boxes?
View 1 RepliesBasically I want to change a text if certain radio button is selected
Private Sub Form2_Shown(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Shown
If RadioButton1.Checked = True Then
Label11.Text = ("Boca Juniors")
End If
End Sub
I'm pretty sure the Form2_Shown is not correct but I dont know what else to put.
trying to write a simple form for calculating professor's salaries depending on their degree and position.my problem is that the when i select a check box, the value is not being updated until i select a different radio button. it probably doesn't make much sense here,
Public Class frmMain
Private Sub optLecturer_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles optLecturer.CheckedChanged[code]....
the values being assigned to my salary label are correct, but are not being updated until i select a new radio button. im not entirely sure how to get around this so that the value is updated as soon as i select the check box.here's when the program looks like:
I am wondering how do i Return a value that is set in a Radio Button and Add it to what Decimal a User inputs into a Text box?
Public Class Form1
Private Sub txtbasic_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtbasic.TextChanged
End Sub
[code]....
i have 2 Error and 1 Warning Function 'OverTime Doesn't Return a value on all code paths.
1 Expression is not an array or a method, and cannot have an argument list
2 Expression is not an array or a method, and cannot have an argument list
I've been looking through the FCL for a method that will allow me to erase a line of text from a text file and replace it with another line of text. Neither the StreamReader nor StreamWriter have a method for replacing or removing Text from a text file, as does the string object. Are there any available methods for erasing just certain lines of text from a file, and then replacing them with others?
In my code, I'd like to locate a certain line in the text file, and then at that point in the text file, use a For...Next Loop to replace each successive line of the text file with new text:
Dim user_data_file As String = "user_data.txt"
edit_input = New StreamReader(user_data_file)
Dim edit_line As String = edit_input.ReadLine
[CODE]...
However, I can't find any methods that will allow me to do this.
Basically what I'm trying to do is read a text file line by line. After each line is read, it will put each line into a separate text box. I've been trying to do this for a while and so far I haven't been able to. I tried using a for loop, but that just put all my lines in to one textbox.
View 8 RepliesI'm reading a text file with StreamReader, line by line. If a condition is met, then I do an operation and then start reading the file again from the first line. I realize I could close and then re-open the file, but surely this would be very slow.
I could do this easily in VB6, but pulling my hair out trying to do this in vB.net. It seems that 'Seek' is the function to use, but it doesn't work.
I've seen other examples, where it works, but you must open it a different way -- with a file number.
Imports System.IO
Dim I as Integer
Dim LineText as String
[Code].....
I am trying to add text from a text box into a list box when the radio button unseperated list is selected. i can do this easily. howeve ri now wnat to put text into the list box from the text box when the sepereated by comma radio button is selected
[Code]...
i would like to store contents from a text file line by line to arrays before copying them to another text file. what i have is currently like this:
[Code]...
Currently I'm only able to store the whole content into one variable, would like to store the content line by line in arrays.
I have to create a new program that reads to Text files. These text files are in the form of a report (with column headings). The purpose is to compare each record line by line to see if their have been any changes made. The record is based on an Account#. Over time these files will be considerably large. What is the best way to do compare records from each file. I'm thinking loading each file into an array and processing them that way.
View 7 RepliesBasically, I'm creating an application which takes a list of words in .txt format, such like this:
Abc
Def
Ghi
Jkl
mno
What I want to be able to do is modify the words, one by one, so that I end with
Abc1
Def1
Ghi1
Jkl1
mno1
or whatever the user wants.
I created this app in C++ to get the logic, since I am more confident with that
I must use streamreader to read text file line by line into array.
Here's what I've got.
Private Sub Button2_Click(sender As Object, e As EventArgs) Handles Button2.Click
Dim numbers() As Double = New StreamReader(txtfile.Text)
Dim numbersarray() As Double
[Code].....
I just joined this forum as I've been looking for a nice and serious VB forum for a long time
I'm having troubles making a program to search a text file line by line for a specific string.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim objReader As New System.IO.StreamReader("C: est.txt")
[Code]...
as you can see in the code its supposed to read a text file and if the line contains the same string as in the textbox then its gonna make a messagebox.
now the problem, if the line does not contain the specific string but the next or any line other line does, then it should automatically read the next line on "Else" and that's where I'm lost
for a "Readnextline" command or something like that?
I have a list of random numbers in my text file.I read it like this.
Dim FILE_NAME As String = "C: est.txt"
Dim TextLine As String
If System.IO.File.Exists(FILE_NAME) = True Then
[code]....
How can I separate that in to 2 listbox?In my ListBox1 I want add lines with starting number like this ( 0905, 0906, 0915, 0916, 0917, 0926, 0927 ) And in my ListBox2 is with numbers start with this ( 0909, 0910, 0912, 0918, 0919, 0920, 0921, 0928, 0929 )How can I compare lines by multiple choices like that?
Ok, I saw this code on the net
Dim sFileName As String
Dim srFileReader As System.IO.StreamReader
Dim sInputLine As String
sFileName = "D:UsersArbenDesktopSerieA.txt"
srFileReader = System.IO.File.OpenText(sFileName)
[Code]...
under the code I pasted at the top, but I get the text on line1 in all labels, like all labels become 1, while the text should be 1, 2, 3 and so on. So anyone can help me do that, each label gets the value of the next line in the txt file
the following code was to be entered to read each line of the file "line by line" It did not work for me as instructed and I am trying to understand why?
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
Dim FILE_NAME As String = "C:UsersOwnerDocuments est.txt"
Dim objReader As New System.IO.StreamReader(FILE_NAME)
Dim TextLine As String
[code]....
I have one combobox, two buttons (Add and View) and listbox. When I click button Add text from combobox is added to text file. This is code for Add button:
[Code]...
i need my program to enter text into a txt file but, i can not seem to find out how to make it press enter, and i what i mean is my program adds to the text like this...[code]
View 2 RepliesI have a text file like below;
606;16
101 GAZ MET.MED. - VIC.BRANESTI 2011-01-11T11:00:00
102 BRASOV - TARGU MURES 2011-01-11T10:30:00
[code].....
i got vb to read the text file but it reads the whole thing and displays it on a text line,how can i make it so it reads it like 1 line at a time after every click,so if my text file is like this
hello
goodbye
then i dont want it to display both, i want it to display hello and if i click a button again then it displays goodbye?
