How do I read/get text/line between specific text. For example:
my html-file contains
<title>This is my Title</title>
I have found a code, which I needed to convert from C#, but it doesn't work:
Private Shared Function GetTitle(html As String) As String
Dim r As New Regex("<title.*?>")
Dim Title_start As Integer = 0
[Code].....
I have already loaded the html-text into a rtb, so perhaps is easier to extract it from there.
I want to read a specific line from an html source code. Im storing the source into a string file and i want to read the line X.So im using this method that i found on net
Public Shared Function ReadSpecifiedLine(file As String, lineNum As Integer) As String
Dim contents As String = String.Empty
Try
Using stream As New StreamReader(file)
[code]....
I have atext file to read
its like this:
T02
X200876Y-140576
X220177Y-124676
X178377Y-124076
X136477Y-121376
X135377Y-110975
X135476Y-120376
this is part of the file. I want to read everything after T02
how can i read after T02?
if i can make a prog that connects a website read each text below a line containing "3-letter words", "4-letter words", "5-letter words", "6-letter words"
leyend * = comment (ignore it)
e.g
3-letter words
*aby, abi, bay, bai, babi, ...
what is in line * i need to make the prog read that and output to notepad.for example
Imports System.Net
Imports System.IO
Dim req As System.Net.WebRequest = System.Net.WebRequest.Create("http:www.a2zwordfinder.com/scrabble.html")
[code]....
In VB.net I'm trying to read in a specific line from a file. An example of the line in the txt file is:
[PATH] = "/this/directory/run.exe"
how to open the file for reading and writing in VB, but I need to parse out the path in the "" (quotation marks).
have problem with getting a single line text from html webpagei have searched for it but when i try that code:
Private Shared Function GetTitle(html As String) As String
Dim r As New Regex("<title.*?>")
Dim Title_start As Integer = 0
[code]....
I've got a file containing the following:
2662666;Birch, Red; 15.65; 2
8228880; Teak, Burmese; 32.95; 4 ;(0,0,2000,1750)#(2000,0,0,1750)
[code]....
how I would read specific line in a text file.Is this possible, if not I would like to know so that I can make the extension in C#?
View 1 RepliesIs there anyway to read a specific line from a text file. Such as reading the tenth line of a text file?
View 3 RepliesI have problem with getting a single line text from html webpage. I have searched for it but when I try that code:
Private Shared Function GetTitle(html As String) As String
Dim r As New Regex("<title.*?>")
Dim Title_start As Integer = 0
Dim Title_end As Integer = 0
For Each m As Match In r.Matches(html)
[Code] .....
Then it gives me a error: REXES IS NOT DEFINED. Also I am using Visual Studio 2010.
I have a txt file that I need to read into a listview, but I need to read from a specific line in that file. Below is a sample of the txt file to read,
6400,3200,2,95.5,84,76.6,0
1,2,-20,15,0,0,0,"NO",0,0
TOTAL GPM= 6400 HWT= 95.5 CWT= 84.0 IWBT= 76.6 ALTITUDE= 0
CODE]...
I have two part in text file. Let say Part 1 and part 2. I want to write part2 in different file and part 1 in different file.
View 5 RepliesI need to read one specific line of a .txt file.. How do I do it?I don't know what item will be there so I can't search for a specific letter... It will be a textbox text.But I know that it will be the 3 line.Originally Posted by ExampleLorem ipsum dolor sit amet, consectetur adipiscing elit. Nulla rutrum risus et ante tempus pharetra. Integer lacus felis, interdum non elementum in, egestas et ante. Aliquam eget nulla sed lectus accumsan congue at dapibus massa. Etiam nisi arcu, vulputate nec venenatis sed, fringilla nec ipsum. Duis quam lectus, venenatis sit amet faucibus ut, eleifend at tortor. Proin dignissim he
View 5 RepliesOkay, so I've been looking on the web for a way to read only ONE line out of a text file. Recently I've gotten by by creating separate text file for each line (such as a text file named, "Username", another named "Password", instead of creating a single text file with both the user name and password.) Now I am faced with having to do this. I want a quick and easy way, VB won't let me do open file as input #1 for some reason. I just need the second line of text out of this text file. What is the quickest and easiest (and painless) way of doing this?
View 8 Repliesi am trying to write code to assign values from a line of a text file to variables in my program. the problem is that I don't need all the values written in the text file assigned to variables. So. Basically I want to know if there is a way to use "ReadLine" to access specific lines in a text file.
View 1 Replieswhat i need to do is open a txt file, read line by line, decode each line into an array and display. Now all works ok apart from one line.
sTextLine = objReader.ReadLine() <-- Value of string cannot be converted.
full code here
-------------
Dim objReader As New System.IO.StreamReader(sOpenFile.Text)
Dim sTextLine As New ArrayList()
Dim sText As String = ""
Dim i As Integer = 0
[code]....
how to read text from a listbox line by line and put current line in a label?
View 3 RepliesDim codice As String
Dim doc As New HtmlDocument
Dim coll As HtmlNodeCollection
Dim node As HtmlNode
Dim nuovo As HtmlNode
[code]...
GND P3559 9812, 7993 p9910.26;
GND P3559 9812, 7993 p9910.26;
46N93 P594 40898, 35899 39MIL;
PHY2_P2_CONFIG0 P2767 34205, 33537 39MIL;
[code].....
i have write all this value in another text file by adding the title.in my original file's line i must check whether the line contain any MIL value if not, I must write first T1 the below T1 i must write all the line which not contain MIL value until i reach a line which Contain MIL value. If the line contain 39MIL the i must write first T5 then followed by all the line which contain 39MIL until it reach the line which contain another MIL value. Let say 50MIL. the i must write T7 then followed by all the line which contain 50MIL. I sort my original file alredy. so the original file will start from the line which dont have MIL to 39MIL,50MIL,75MIL and 100MIL. Mu output file will look like this
GND P3559 9812, 7993 p9910.26;
GND P3559 9812, 7993 p9910.26;
[code].....
I'm trying to use a local resources file called help.html as a webbrower1 document. I don't want to hardcore the HTML document into the application but to use a resource file.
How do I link the the HTML file to a webbrower control?
I want to get the date value for
Nov 1, 2010 00:00:00 GMT
expressed in my local time.What is the best way? Currently, I am doing this:
Dim NovGmt As Date = New Date(2010, 11, 1, 0, 0, 0)
Dim Nov1AsLocal As Date = GetGmtExpressedAsLocal(NovGmt)
Private Function GetGmtExpressedAsLocal(ByVal gmtDate As Date) As Date
[code].....
tell me difference between the Date and DateTime datatypes? Is DateTime newer than Date or is it just a synonym for Date? If the latter, why have both?
I'm trying to get a local HTML file to display within a WebBrowser in a VB.NET program. I'm using the code below, however it doesn't seem to work, and I can't figure out why:[code]The first method produces the error "" in the Debug console when I go to run it. If I try it with out the @, I get an empty white page. If I change the address, however ,so I know its a broken URL, I get a 404 message, which makes it seem like it's finding the file but not rendering it?The second method does the same as the first except no error is produced, its like its finding the text but doing nothing.
View 1 RepliesI'm trying to read a file line by line into an array but It skips the item at index:3 I have it msgboxing just to make sure and it wont even touch it.
Dim Btn As Button = DirectCast(sender, Button)
Dim path As String = Application.StartupPath & "Libraries" & Btn.Text.Replace(" ", "_") & ".ipt"
Dim i As Integer = 0
Dim lines As String() = IO.File.ReadAllLines(path)
[code]....
How do i read through a textfile line by line checking for and removing duplicate values?
View 1 RepliesI am developing a program where i will download and save an xml file from a url as abc.xml. I open the abc.xml in a datagridview with a dataset without problem.I am confused how can i read raw per raw the datagridview and assign the data in a database table? i am using vb 2008 + msde2005 express.I show the whole content of the xml file in the datagridview with the following [code]I dont know how to create a loop where i can read the datagridview line by line save data in variables (ex.strings) and save it in a databese table?
View 6 RepliesSay a machine has two seperate IP's. I am running a little test program that connects to an outside piece of hardware that has it's own IP. I receive data from that hardware. I want the same little program assigned to the two seperate IPs on my local machine to get the same data from the hardware. How can this be done?I am receiving data just fine but I am not seeing how to tie the program to a specific IP on the local machine. As soon as I run another instance of my program, not data is received on the second instance.For example: I have a program running on a machine. I want two instances of that program, each on it's own ip
Instance 1: 192.168.1.240
Instance 2: 192.168.1.241
I want both instances to listen for data coming from 192.168.1.50
This is a generic example of what needs to happen. I need to know how to define the local IP's the UDPClient is running on.
I want to open a local html file in the user's default Web browser, and jump to an anchor within that file. In other words, I would like to have a result similar to clicking a link to localfile.html#my_anchor.
I've been using the System.Diagnostics.Process.Start(String) method to open html files, and this works fine. In the following example, I open a file named "info.html" in the "SomeInfo" subfolder of the folder containing the application:
Dim
ProcID As
Process
[code]....
I have a text file with an unknown number of lines. I want to read this file line by line and send each line's text in a check list box. But how am i gonna do that when i don't know how many lines exist in text the file? [code]The code above reads only the first line. I tried to do it as in vb6 using while not eof(but here i don't know what to write cause my file isn't opened in a certain channel).
View 4 Repliesthe best method to read a huge file? I'm guessing its with "stream"?It's like a 200mb file.I need to read each line and do something if the line contains a search string.
Code:Imports System.IO
Public Class Form1 Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click Dim strFile As String = "c:
[code].....
I like search a file TXT with this contains:
Name "Paul"
Age "11"
City "Chicago"
my question is: Its possible get a string "Name" and give me the value "Paul"? I have this function for get strings:
[code]...
