I'm trying to recolor all components in a form by using a recursive method. However, it always recolors the form and then stops. How can I make it go past this step? Here is the code I've been experimenting with:
Public Sub fixUIIn(ByRef comp As System.ComponentModel.Component, ByVal style As SByte)
Debug.WriteLine(comp)
If TypeOf comp Is System.Windows.Forms.ContainerControl Then
[code]....
I've asked a very similar question before, but this time is not about VB syntax, but rather the best approach. I'm making a method that, when passed a component, will recolor it and all components contained within it. Below is the code I have so far, but it is not recoloring all components, instead only a mere few. My main problem is buttons staying in their "3D" styles and not becoming "flat".
[Code]...
The component passed is comp, and the getColor method looks into a database and returns a color corresponding to the part parameter passed to the method. This works for all low-level components and all simple components like labels.As you can see, this is not my preferred outcome. Does anyone know how to recolor spinners, buttons, and menu bars? Again, I need the button to end up being flat.
I am hopeing someone can help me here with a recursive function I have that is not returning either true or false as I would have espected it to. The function loops through a Active Directory group for its members and then calls itself if it encounters any groups within the membership in order to gets its members as well. I am trying to return either true or false based on if any errors were encountered but not haveing any luck at all. It appears to just hang and never return back to the primary calling sub that starts the recursive function. Below is my code I am using:
[Code]...
I have the following data in this a table
ID ParentID Active Node
1 0 1 <RCExtRequest>?</RCExtRequest>
[Code]....
If changing the table layout would make this any easier then I could so that.
I have been working with getting a recursive directory list function going and an attempt that I was considering doesn't seem to work.As it doesnt seem to return all folders.
Public aFolderList As New System.Collections.ArrayList()
Sub recurseDirs(ByVal sPath As String)
Dim dirInfo As DirectoryInfo = New DirectoryInfo(sPath)
Dim subDirs As DirectoryInfo
[code]....
I'm a beginner to VB.NET. I'd like to make a simple backup program, and therefore I need a way to get a list of all files in a folder, and all subfolders. I've been searching the forum for "recursive file list", but it's too difficult for me to understand. Any simple way to get all files in a folder and all subfolders?
View 5 Repliesi have these 2 functions that search for any .jpg files starting from a given path the algorithm works, it's just that it freezes up the gui at times this is why i wish to know how to implement it through a new thread or a backgroundworker maybe.[code]
View 2 RepliesHow would you put in that if a folder on the directory i'm copying from is, says, "windows" then to skip it?
Usage:
' Copy Recursive with Overwrite if exists.
' RecursiveDirectoryCopy("C:Data", "D:Data", True, True)
' Copy Recursive without Overwriting.
[code]....
I have a series of text files in multipule diffrent sub directories. I found the following functions on the Internet:
Private Overloads Function Recursive(ByVal strPath As String)
Dim oDir As New System.IO.DirectoryInfo(strPath)
Dim oSubDir() As System.IO.DirectoryInfo
[code].....
I'm making a program that can mark my shooting cards and i have created it and it works nicely But i want to get as much speed out of it as possible so I switched my target CPU to X64 and sure enough my recursive function threw a Stack overflow exception telling me i need to make sure i don't have Infinity recursions. Strangely when I set It back to X86 the same recursive function works...
vb.net
Dim bullethole As New List(Of Point)
Function GetBulletHole(ByVal point As Point) As Point()
[Code]....
Is it possible to use a recursive function on an array
If I have an array like this[code]...
I want to use a recursive function to make in out like this[code]...
I've created the following recursive lambda expression that will not compile, giving the error
Type of 'OpenGlobal' cannot be inferred from an expression containing 'OpenGlobal'.
Dim OpenGlobal = Sub(Catalog As String, Name As String)
[Code].....
I have a recursive function in this function i am adding some value to path variable here i want to acess this value outside of function for this what changes i will do in this function.
Private Sub GeValuePath(ByVal ParentID As Integer)
Try
dim path as string =""
[Code]......
I am currently creating a little application which will essentially backup my work I do at college. It works by me saving all my work onto a flash drive. When I run the application it will copy all the contents of the flash drive and copying to my college directory and when I'm at home copy to my Dropbox folder. This essentially gives me 4+ areas where my work is saved. Unfortunately, the college computers due to network restrictions and other problems, the use Dropbox on the college machines (I obviously can still access the website).
[Code]...
I wrote some code yesterday which shows a directory listing of an FTP server and if you click on a folder it will show that directory and their is a back button. But I dont think it is efficient and I can tell there will be a lot of errors.
Imports SylentUpload.Utilities.FTP
Public Class Form3
Private DirectoryHistory As String = "/"
Private DecryptedUsername As String
Private DecryptedPassword As String
[Code] .....
have an xml file like this.
<?xml version ="1.0" encoding ="utf-8"?>
<menu>
<menuNode title="Register" value="true">
[Code]....
I have 3 variables. Lets call it "a", "b" and "c". These 3 variables can "independently" have 3 different values. Lets say: "1", "6" and "10". when you think of them as combination; there are (3^3) 27 combinations. I am told that it can be done through the recursive functions. However i am not a good developer to handle with that. Would u please help me?
- 3 variables and 3 different values are simplified. In fact; the numbers of variables and different values can vary.
- i know only the language, visual basic in .net; please don't answer in other coding languages.
additional note: i am going to put the these combinations in the string format into a collection.. for example "1;1;1", "1;6;1", "1;6;10".. and so on..
I have a recursive function wich objective is scan an structure and represent that structure with treenodes. Inside my function depends the structure I'll have to create another treenode inside my treenode or just create a node. My problem is that I don't know how to remember my treenode position when I have to call my function again.
If strTop.TextString.ToUpper = "DMN" Then
gcTreeno.Nodes.Add("Node")
Else
Dim perf As New TreeNode
gcTreeno.Nodes.Add(perf)
End If
if i would like to write next time a node into perf, how i could do it?
I'm trying to recursively loop through the components in a window, but it never gets past the window to its sub-components. What am I doing wrong?
Public Sub fixUIIn(ByRef comp As System.ComponentModel.Component, ByVal style As SByte)
Debug.WriteLine(comp)
If TypeOf comp Is System.Windows.Forms.ContainerControl Then
[code]....
I have a MyList (List Of Longs) in which I need the check a specific relation between any two members of that list, if the relation-check returns true I need to delete checked member.I was used to do something like that with 2 For Next Loops, is there a better way. Would it even work that way with Lists?What is happening when an Item is removed from the List that has not been called by the outer For-Next yet? [code]
View 6 RepliesI'm designing an app that resets permissions on folders so I've made a treeview that uses GetDirectories to populate itself with all folders on a user's computer. The TreeView has the "checkboxes" property set to true so the idea is that users select all of the folders from this treeview that they want to reset permissions on and then click go.
So once they click go I need to loop through all nodes in the treeview and all subnodes etc and test to see if they are checked, then if they are I want to add each node to a list and then in the next routine I would loop through the list and reset the permissions.This is what I am doing at the moment but I keep finding that the objects added to my list are duplicated.For example if I select C:Test and C:TestTest2 in my treeview then I end up with my List looking like this:
[Code]...
I have to map a directory with all subdirectories and their subdirectories and so on, all in a treeview.
I have this code but it has a "small" bug, is not done well.
[Code]...
How can I use a recursive function to remove a character from a string thats stored in a array.
Like so
MMMMM
MMMM
MMM
MM
M
I need to remove a letter from the string each time it loops through the string until there is only 1 letter left in the string.
I have a VB 2008 Express program that uses a sequence of functions to move a set of image controls randomily until they meet some criteria as returned by a function, named here Passed().The random placements can result in an unsolvable solution, i.e. an infinite loop; So I've implemented a timer check that triggers just longer then the typical solution time (~2 seconds). Assumption being that any attempt longer then typical is likely headed to oblivion.
Upon timer trigger I attempt to reset all the images to a known location and simply recall the preceeding functions to again try placing them until they meet my desired outcome.I believe I am encountering an out of memory type error, due to an apparent corruption of the display (great big white area appears for no apparent reason and program never returns without manual halt). Program does appear to restart properly a couple of times before this 'lock-up' occurs.
Example of my code,
Public CnameA, CnameB as String
Public Cmax as Integer = 10
Private Sub Form1_Load(...)
[code]...
Is it possible that the calling of New each time might be filling up the available heap / memory (there are a lot more images then the 5 demonstrated here. I am unsure how to clear it and even if I did would clearing the memory associated with New Point () cause my images to not be displayed?
I have a dynamic website that shows articles. Any article can have sub articles and sub articles can have sub articles etc. I have wrote a routine that recursively goes through the data creating a new sitemap xml file. My problem is this:-
Art1
SubArt1a
SubArt1aa
[code].....
For some reason, it seems that the outer block doesn't seem to update recursively, as I expected it to. I want the loops to add all directories within "C:UsersDrise"to the array internaldirs(). Any advice on the correct way to do this, as it seems I'm doing it improperly?
Static internaldirs() As String
internaldirs.add("C:UsersDrise")
For Each internaldir As String In internaldirs
[code]....
changing data in a certain tag within an XML via vb.net.
The files will be all in subforms and look like:
<?xml version="1.0" encoding="iso-8859-1"?>
<Documents xmlns:xsi="http:www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="myxsd.xsd">
[Code].....
I've been applying some recursive techniques to the second version of my app. This recursive procedure simply iterates through all nodes in a tree view and tests whether the text in the "department text box" matches the text name of a particular node. If there is a match, then the user's name, stored in the "name" variable, is added as a node to the node that has the same name as the department text box text.
[Code]...
I need two class libraries that reference each other.Why? One is compiled in C# and the other in VB.NET. It would be better if I could somehow merge the assemblies programmatically, without requiring external programs or even the extended framework.
View 1 RepliesI have the below code that (not sure exactly where I found it) I am trying to add a recursive rename to all files in the directory. Currently, this code only does a folder at a time, however, I need it to go through all the folders and change all files.
Private Sub StripXfromBeginning(ByVal strip As Integer)
Dim JustFileName As String
Dim attributes As FileAttributes
GetFileArray()
For Each fileNameToProcess In FileList
[Code] .....