So I'm making a Program to Start/Restart/Stop and running commands from the Console for my Server.Now when someone uses the console, I want to be alerted of it on my Mail.I am using Visual Studio 2010.
[Code]...
I am trying to get this program to send an email, but still no luck. I am getting the following error that I do not understand. I do not understand what I am doing wrong. Also, I may have an issue that the computer I am writing this code on and trying to send the message does not have ISS and is just windows XP home.
The error is below
System.Net.Mail.SmtpException was unhandled
Message="The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.7.0 Must issue a STARTTLS command first. k41sm2133530rvb.6"
[code].....
This emailing code wont seem to work in my program. I get an exception "The SMTP server requires a secure connection or the client was not authenticated. The server response was 5.5.1 authentication required."
Imports System.Net.Mail
Public Class emailStudent
Private Sub sendEmailButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles sendEmailButton.Click
SendMail()
[code]....
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim mail As New MailMessage
[Code]....
The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required
Im using the code from [URL] as a starter, most of the code is the same. the chat system works fine but on the client a added a disconnect button "clientSocket.Close()" and as soon as i click that i get errors, on the client, this is the code...
Private Sub getMessage()
For infiniteCounter = 1 To 2
[CODE]...
And this line...
serverStream.Read(inStream, 0, buffSize)
gives me "Unable to read data from the transport connection: A blocking operation was interrupted by a call to WSACancelBlockingCall."
Now im talking the server, after the client clicks disconnect or closes by task manager, looses connection, etc the server crashes and gives me.
As some of you may know, I'm trying to develop a client/server application that requires sending files and text. Text is not a problem, this works fine, and for some of the part, sending files works, but they get slightly mangled in the process. For example, I used a 4x1 BMP that was alternately coloured red and white and tried sending it across. The output was the correct image dimensions, but the colours were wrong. It was more like a very dark red and very dark grey. I inspected the files with notepad, and the header was the same, but the data was different.
I did some research and apparently need to use a BinaryReader and BinaryWriter as opposed to reading the data as a string (like I was when it was being mangled) but now the data is all wrong, even filesize is different.The code below is a simple example of code for reading an image and then writing it again elsewhere using Binary Read/Write.
[Code]...
I have an application that takes a series of reports and sends them as attachments in an email to a specified group of email accounts.
When I run the Java version of this using apache commons and the same setting, the email is sent. However, when I run the VB.NET version of the code, it fails on my local machine and on the client machine.
I have a VB.NET web application running on a server that uses similar code. I tried that code locally and it fails. Yet, the web application is working perfectly.
Why is it that the Java application can send the email, but the .NET application cannot?[code]....
I'm using the TcpClient and TcpListener classes to read/write to the network when a request comes in on port 25. All I'm trying to do at the moment is make it so that my server program can receive SMTP messages from other SMTP servers. I've tested in Telnet - if I connect to my own IP on port 25 and type EHLO, MAIL FROM, RCPT TO, DATA etc then all works as it should and the details I entered are logged by the program (it doesnt do anything about delivering these details/email yet).all looks good... but then when I try and just send an email to my domain from my work account I can see that a connection is made to my program and the string "EHLO workdomain.com " is received by my program - my program responds to the remote SMTP server with "250-mydomain.com Hello" and then a CrLF and then "250-OK". After that point however, my app does not receive anything further at all from the server at work. I'm guessing I am doing something wrong with the data I'm returning when it sends EHLO but can anyone point me in the correct direction?
I was using telnet to test with, it seems that I have made it work only with telnet.In telnet each time I type a key the data is passed to the server, however with a real SMTP server it just sends each entire command in one go. So after altering my server a little I can now get it to respond with the 250-OK which I thought it already was doing.. but it still doesnt work. The remote server just sends EHLO and then thats it nothing more.Something interesting, at the moment I am ending all of my responses to the remote server with VbLf - if I change this to VbCrLf (which is what I believe it is meant to be according to the SMTP standard) then I get an infinite amount of empty strings sent to my program (or perhaps some other character that just shows as an empty string in intellisense when stepping through the code). Changing it back to just vbLf or ControlChars.Lf makes it go back to just sending EHLO and then nothing else..
I've been Searching the Net for hours now, and i can't really seem to find anything clear and straight to the point.
I need to create a Server/Client application using VB.net 2008, it's actually my first time to have a database on another computer. So I first searched the internet for the things i need to make this software.
[code]...
I want to create a client-server application, it means I just need 1 database on the server.I have a computer and a laptop. I set my laptop's IP to 192.168.1.1 and my computer's IP to 192.168.1.2.Now I place the database on my computer, the database name is db_transportasi.Problem is, how to connect my computer's database from my laptopSpecification :I'm using this string below for my connection :Data Source=ARVID-THEODORUSSQLEXPRESS;Initial Catalog=DB_TRANSPORTASI;Integrated Security=TrueI already setup my SQL Configuration Manager, enabled the TCP/IP, switch to the IP Addresses tab and set the IPAII Port Properties to 2301I turned off my firewall so I don't have to set any exceptionQuestion
View 4 RepliesI am a newbie in VB.NET I am using Sql Server Express 2005 as my database.I am currently working with my THESIS. A Human Reources Information System that concerns only with the file and record management of the employees. With two modules.a. Administrator for HR Manager (w/ installed vb.net and sqlserver express 2005)b. Staff for HR Clerk(w/ intalled vb.net)
Here is my problems:
1. I want to learn how to connect my vb.net application in each other using TCP/IP or any network connection tips.Scenario: If the client Save/Edit/Delete/ a record automatically it will saves on the admin sql database.
[Code]...
I have a TCP connection code for client and server communication. It's not meant to be malware but it collects the clients computer information and then connects to the server.
It successfully "connects" but then immediately disconnects.Here is the code for the server:
Dim Listener As TcpListener
Dim Client As TcpClient
Dim ClientList As New List(Of ChatClient)
Dim sReader As StreamReader
[Code]...
I have port forwarding all done and it works if I run the client and server on my own machine. If I run the client on another machine though It gives me a message box saying that it connected with the clients remote IP and at the same time it tells me it disconnected. The client never sends the system information. What is the problem?
For almost a week I am reading and trying to find a solution for checking connection state using a TCP Client (using socket class) In my scenario I have a TCP Client that is connected to a server (it is not controlled by me) and i want that from time to time to check the connection state, and reconnect if necessary.I have read a lot of information on the internet but i did not find a suitable solution.Briefly, these are the methods that i have found on the internet and try to implement.But unfortunatelly, i have found some scenarios where the TCP Server is closed and the TCP Client is still saying Connected 1.Example from MSDN
[code]...
I want to make an application that can push ads (website) to client..
Here is the case : Client try to connect to internet via wifi. Once the client is connected, server send a website address to client, and a popup (website sent by server) will appear in the client's computer in default browser.
I can list all IP connected to server, but i don't know how to push the website to client
Here is the code to list all IP connected to server : (import System.Net library)
String strHostName = "";
if(args == null || args.Length == 0){
strHostName = Dns.GetHostName();
[Code]....
I want both the client and server to write and read resp. at a constant rate (which can be configured on the GUI of the client) to the buffer.I am able to send from the client at 150 bytes per packet Now, I should be able to read also at 150 bytes per packet on the server too Since, both are connected through a socket, can we retrieve the socket params (set on the client size, like 150 here) from the server end, using the tcpServer object.Or is it must to send an initial setup packet which tells about these client params and so accordingly the server can continue?
View 1 Repliesi need to know about how to build connection with server and client? eg: my server is 140.134.5.1 and my client need to connect to it to do communication,how should i do?
View 6 RepliesI'm using a "wsHttpBinding" with a reliable session. I'd like to keep the client-server connection endless open. Therefore I need to set the ReceiveTimeout to "infinite". Has the "ReceiveTimeout" an other purpose (e.g. client crash detection; detecting a hanging request; etc) or can I set it to "infinite" without problems?
View 1 Repliesi have an application. which is executed after every 5 mins. i have an open connection but it gives me the following error:
ExecuteScalar requires an open and available Connection. The connection's current state is closed.
my code is something like this. I have shown where all i am using ExceuteScalar()
Sub Main()
Try
connection.open()
cmd.ExecuteScalar()
[code]....
i make a class and when i call on form then that error occurs "ExecuteNonQuery requires an open and available connection, the connection Current stat is close "
Class Code isImports System.Data.SqlClientImports System.DataImports System.StringPublic Class DatabaseKits Dim Cn As New SqlClient.SqlConnection Public Function BuildConnection() As Boolean Try Cn.ConnectionString = "Persist Security Info=False;Integrated Security=True;Trusted_Connection=Yes;database=BizAimsPro2008;server=Server-2k3s" BuildConnection =
[code]....
how to create a client/server... But I couldn't... I don't want anything fancy. Just want the client to send the server 4 numbers, depending on the user's choice; after that, the server would turn off the pc, restart it, etc. It all depends on the number received. Is there a rather "simple" way to do it? If it's not to much trouble you could use Atheist's example. (Btw I don't understand the code and, yes, I've checked on [URL])
View 9 RepliesHey guys, I am trying to send data from client to server (encrypted) and the string sent from the client is not the same as recieved from the server. I've been killing my brain for hours to get this to work but I cant manage. Im converting everything to Base64 string.
Client:
Public Sub SendMessage(ByVal msg As String)
Try
SyncLock myclient.GetStream
sw = New IO.StreamWriter(myclient.GetStream)
[code]....
I'm trying to send an email via the SMTP Client. The following line is rejected
CredentialCache.DefaultNetworkCredentials
The intellisense suggests this one:
Net.CredentialCache.DefaultNetworkCredentials
I'm using the System.Net.Mail Namespace...is this the correct one?
I wrote a Socket Client which will send the Socket Server some data and get some response from Server. This process will be running once in every 2 seconds.
Now what I need to know is How we can identify the connection lost between Server and Client?
I need this to be implemented in the Client side. If there is no connection then Client should automatically close the connection. Once the connection with the server is available in the next attempt it should connect automatically.
We are creating a Who wants to be a millionaire style game in VB. Our server is pulling information such as questions and answers from a Access Database and sending them to the contestants (Clients). All transfer of information is directly from the server to each client. One of the "Life Lines" we want to use is "Ask a friend", where one client is able to Instant message another client for a short time to get help on the question.
[Code]...
I need a bit of advice. I would like to store secure connection strings somewhere safe in vb.net. How can I build the secure connection strings in what situation and what would be the best?
As I have done the little research and found that the secure connection strings would be encrypted the strings and input the strings in app.config, so I would have to make a change in the app.config[code]...
I am developing an .net Winforms application and I need to secure the connection to the sql server 2008 database. I plan to create a webservice as a middle tier that will handle the authentication and that will provide data manipulation. Is there a better way to go with? Does .net have components or tools for that? What is the best technique?
View 2 Repliesbasically i just want client to say "C: emp" ENTER
then, server must reply with all its files in c: emp
i'm tying to send email in my application directly by the smtp server but the server doesn't allow me to do that.The application its used by everyone in the company, so i set the smtp client UseDefaultCredentials to True, but the server replies with this when i try to send an email:[code].....If i set the credentials by hand, the server sends the email. So my problem is how to make this work to everyone? I don't want to have one public/friend var all time in the application with the credentials of the current user?
View 9 RepliesThe problem I have is: When I click on cmdListen in the server form and cmdConnect in the client form,both programs won't respond and they crash for some reason I don't know.
Client source code:
Code:
Imports System.Net.Sockets
Imports System.Text
Public Class Form1
[CODE]...
Code:
Imports System.Net.Sockets
Imports System.Text
Public Class Form1
[CODE]...
I am making a program with a very good HWID system, but so far it uses a standard WebClient control, I want to know how to make it more secure, like possibly encrypting the connection to a site (Uses PHP), or making sure the connection isnt being tampered with. are their any tools/pieces of code to do these checks/encryption?[code]...
View 1 Replies