I usually use table-layout-panel container in windows form to enable formre-sizing. But I've got too many label boxes and text boxes in a form to to fit in normal resolution. So I am in need of a similar container which is bothscroll-ableandre-sizable. Can someone tell me how it can be done using table-layout-panel container. If it doesn't support that kind of things then which one does?
View 7 Replies
I have an older VB6 program that uses a MDI sheet. this program was upgraded to VB.net. I can not get a new Windows Form to use the MDI Container. the new sheet lays over the top of the MDI sheet.
View 10 RepliesI have a windows form with a tool strip menu, a header and a datagrid view.
When I add auto scroll to the windows form the scroll bar scrolls through the whole windows form, I want it so that it only scrolls through the datagrid and the header and tool strip stay fixed and don't move.
A panel with enabled scrollbars has many buttons. If I push the tabulation key, focus navigates between buttons.When a partially visible button has focus, the panel scrolls itself in order to completely show the button.
View 1 RepliesI have a Windows form application with a MenuStrip at the top (File, etc...) and a TabControl directly beneath it with 8 TabPages arranged horizontally. The tabpages vary in height. The form's autoscroll property is set to True to allow the user to scroll down for those tabpages that contain more content. This all works fine.
What happens at runtime, though, is that when the user clicks on some of the tabpages that are greater in height, the scroll bar automatically scrolls down slightly, which obscures the menustrip at the top of the form. This behavior is undesirable. on how to modify it? I have compared the properties of the form itself, the tabpages, and included controls (table layout panels, etc.) but cannot figure out what distinguishes the tabpages that "jump" down when clicked upon from those that do not. I suspect that there may be a property that eludes me.
Second, I have added a ContextMenuStrip to the form to enable actions upon right-clicking within each tabpage. Even though I have assigned it to the Windows form and each tabpage, it does not appear at runtime. One can right-click all over the place within the application, but it never appears.
My question is regarding a scrollbar in visual basic adding it the "picture way" in the ide and i want to be able to have it so that i can change the number of scrolls it does like pages, but with the scroll bar changes data depending on it's position. I have the following code to try and get the scroll bar to have 6 positions starting at 1With frmIndashone
.vscPage.min = 1
.vscPage.max = 6
.vscPage.value = 1
[code].....
The following zipped up Visual Studio Solution on Skydrive is immediately buildable and runnable; a usercontrol on a Form. Problem? If you click on any of the Edit Buttons and move the Horizontal Scroll, the values as they change in the Label_Values are off by one when you release the slider button. I think this is a timing problem between the Paint handler and the Horizontal Scroll event handler at the very bottom of the User Control code. Sorry I didn't eliminate
View 2 RepliesI am having an odd problem with the Horizontal Scroll Control in my program.I am using it to scroll a series of panels across a form.This is my code:
Private
Sub scrHoriz_Scroll(ByVal
sender As[code]....
The problem is that this works perfectly if I use the left and right arrows and it also works perfectly if I use the scroll bar's slider SLOWLY. If I scroll using the slider and move it quickly then the scroll gets out of sync.The small change and large change are both set to 1 and maximum is set to 8
I am developing a web program using asp.net(vb) that scrapes data of a certain website. I am using System.Net.HttpWebRequest and System.Net.HttpWebResponse.My problem is I can not retrieve the codes of certain frame/container where the data that I needed is located. I mean, when I view the source code of the website, I can not find the data but I can see it on the web page. When I view source it, it is under the
[Code]...
I'm creating a program that requires an MDI Parent Container to keep its Children inside of the client area. If you didnt understand id like a MDI to have all the forms it creates to stay inside of the actual MDI.
I've said like the windows desktop becuase thats what the windows desktop is. It's basically a realy advanced MDI container.If you know any methods on how to do this as this may be used a lot by future programmers and it would be great to just link this to the same type of question.
I have a problem with scroll in a treeview in a Windows forms application (Framework version 3.5).
The strange thing about the problem is that on Windows XP, Windows 7 and Windows 2008 the scroll works as excepted, but in Windows Server 2003 SP2 the scrolling doesn't work. Enable/disable Visual Styles doesn't seem to make a difference on Server 2003.
Steps to reproduce the error:
1. Add a treeview to a form and add x nr of root items (and 1 sub item to each item).
2. Expand a number of nodes. The non-standard thing here is that we are changing the node integral height because we display a usercontrol with the treenode (See example of the code below).
3. When you scroll afterwards, you cannot scroll to the bottom node. The scrollbar is all the way down, but we are not seeing the last node.
Public Shared Sub SetNModeHeight(ByVal Node As TreeNode, ByVal IntegralHeight As Integer)
'Create instance of tvitemex structure.
[Code]....
I need to dynamically add ovalshapes to a form. The application user would enter a number of shapes (variable), and other parameters for the shapes as location, color,etc. After this I need to display these shapes in the screen. Every sample I found shows a fix number of shape hardcode by the programmer.
View 4 Replies-I have a form where IsMdiContainer = True
-I add Split contaner which has 2 panel vertically (panel1 and panel2)
-In Panel1 I have buttons where every button should display a form in panel2
I want to display a form in the center of panel2 .I had tried the below code and not working
frm_Login.TopLevel=False
frm_Login.Parent = Me.SplitContainer1.Panel2
Me.SplitContainer1.Panel2.Controls.Add(frm_Login)[code].....
Should I do the math my self and assign Top and Left to the form?
I have this simple set a codes that opens a form as a child in MDI container.
Private Sub BarButtonItem1_ItemClick(sender As System.Object, e As DevExpress.XtraBars.ItemClickEventArgs) Handles BarButtonItem1.ItemClick
frmConfirmShipment.MdiParent = Me
[Code]....
When i run this set of codes, system keep telling me that same form cannot be both mdichild and mdiparent, however, I never set my child form as a parent.
I have a project with a number of forms. In Form2, I have a split container. In panel 1, I have a number of radio buttons. What I have not been able to do is use the radio buttons to select a form to be shown in the panel on the right.
[Code]...
Private Sub NamesControl_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
cmbo1.Items.Clear()
[Code].....
How do I access parent form or container's other controls?
I have the need to maintain a 4:3 aspect ratio on a Video control on a form. The forms (there could be up to 16 in a 4x4 layout) should all maintain a 4:3 aspect ratio when resized depending on clients monitor/resolution. The forms have a border and will keep them. The control is set to fill the form and is the only control on the form. Here is code that I use to create the initial layout:
[Code]...
see the code below i placed form and made it isMDIcontainer=trueadded treeview to this form and docked to leftadded split Containeradded 2 child forms namde Form3 & Form4
everything ok, except one thing the child forms not showing up
Public Class Form2
Private Sub Form2_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
[Code].....
I've two forms Form1 and Form2, I want to add container(*) in form2 having toolstrip(Toolbar) and later want to display that container(containing toolstrip) in Form1, that enable the user to use toolstrip to execute needed actions written in form2.
[Code]...
If document is big then there will be scroll bars in the windows. Does anyone know how to know the measurment of those scroll? For example, if I scroll to look at the bottom domain. Some topscroll or scrolltop property should go up. But which one?
View 2 RepliesI had a master form which has a MDI container.When I was load the master form, I will also display another form inside the MDI container.But I was fail to maximize the child form to fix the MDI container. The image below is my problem Untitled2.jpg. I need to expand the form above to touch the MDI container border. (Full size in the MDi container)But I was fail even I was set the child form window state to Maximized
View 3 RepliesAm devloping an application with multiple forms, which reside on top of a main form. i.e the main application window. The 'child' forms do not need to be linked in any way as they do not pass information to the parent form, as all the parent form does is act as main window.Now I would like to know what is the correct way for the 'main window' form acting as a container for the other forms? So that all the smaller secondary forms stay focused on top of the main application form, that when the main window is minimized, so these forms should do also etc..
I have read other posts and they mention, leaving all the forms standard i.e. IsMdiContainer = False and then using form.showDialog() to call the secondary forms. This did not work for me as what happens is that as soon as I give focus to the main app form, the secondary form disappears underneath.I tired making the main app form IsMdiContainer = True and when it loads calling:
frmMemberForm.MdiParent = Me
Now this works, because I can click off the form and minimize the app etc and the frmMemberForm doesn't disappear. However if i close the MemberForm and reopen it, it looses this property and once again when it looses focus, it will disappear.
I have a custom control of type MyListControl with a Property called NotifiedList. I would like that when selecting that property in the Property Grid at runtime, that a dropdown list is populated with all the instances of type MyListControl that shared the same container as the original control.
View 3 RepliesI'm making... well, it's sort of like a game in VB.net (using VS2008, if it matters). Being sort of like a game, it's dependent on timing, but it also has a large area (have to scroll the window on pretty much any resolution).The problem I'm having is that whenever I scroll the window (or move any of the smaller, additional windows) the program pauses what it's doing, and doesn't start again until I stop scrolling (or moving windows, or whatever).So is there any way to stop it pausing when you scroll or move windows?
View 1 RepliesAnyone know why in Windows vista if i have a comboBox in in my program it looks differant in vista. AKA when i drop the combo box in windows xp it has a scroll bar to the side, but if i drop it in vista it just drops the entire length (how many rows i have put in the box) This could get very anoying if i had lots of items.
View 4 RepliesI have a tab control with two tab pages. One page has the auto scroll enabled since there is to much content in the page. The middle mouse wheel doesn't scroll the scroll bar; I have to actually click and hold the scroll bar and drag it down to scroll. Is there a property to allow this?
View 2 Replieshow can i add V scroll Bar to my form to move UP/DOWN?
View 1 RepliesIn my project I am create a form which has a scroll bar. When the form loads, it is scrolled to the bottom of the form. I want it to appear at the top of the form so the user can see the information at the beginning, rather than having to scroll up to see the tiop of the form. I have tried using focus() on the header label and this piece of code, but neitehr have worked:
[Code]...
I have an mdi form and few child forms. I have set the autoscroll property to false, size to (640,480) for the mdi form, but still the scrollbars are shown. I am setting the width of the child forms on mdi resize event to the width of mdi parent. My requirement is that the mdi parent should not show scrollbars at all for the entire life of the application. What are the properties that I need to set additionally?
View 6 RepliesI have a DataGridView with a panel above it, that contains a group of textboxes above each column. My DataGridView has a horizontal scroll bar. What I want to do is when the DataGridView scrolls horizontally, scroll the panel with textboxes above it, so they stay aligned.I tried handling the DataGridView's scroll event, but I'm not sure what to do with it.
View 1 Replies