Setup Taking Too Much Time For Installation?
Aug 23, 2009Setup taking toomuch time for installation
View 5 RepliesSetup taking toomuch time for installation
View 5 RepliesHow can i add serial key at the time of installation when i install vb.net 2005 setup on any system like windows to proceeed installation you must enter the related serial key.
View 4 RepliesI have a vb.net application . I have added references of Ms Excel into the application.In my machine both vs and ms office are installed
Now I move my code to another machine where only vs was installed and not ms office . When I run the code from vs it works perfactly.
Now I make installer. I install it on my machine and it works
I also install it on another machine where ms office not installed and it does not work .
my question is why it is working when I am running from code and not when I am running from Installed shortcut ?
and should I need to install ms office also on the machine to run the application from Installation. ?
I have a series of 12 individual projects developed under a single solution. Now I want to create a Setup Project for installation of these projects. I want to have single setup.exe as output which should install either 1 one of these 12 projects based on the user selection.Whenever user tries to install these by clicking setup.exe, he must be provided the option of selecting the project and then installation should proceed installing the corresponding exe.
View 1 RepliesI have vb.net project (visual studio 2005) and ms-sqlexpress as database. i want to make file set up that contain vb.net exe file and other necessary files and installation of ms-sqlexpress.
View 4 RepliesI have a little prob guys. How can we set vb.net setup project will check for an update of its newer version first before proceeding in installation.
View 5 RepliesI need to Install a MSI Package as a Prerequisite For an Installation Using Wix Setup...How Can I do it....? I first need to install this MSI package and only want to Continue the Set up,If this Installation Would be Successful...
View 2 RepliesI'm currently working on a project that populates a database with CAD document info from approx 20 engineers / draftsmen in an engineering office.I have the program functionality working on my computer. However, I would like to install this on the network and begin doing some addiitonal testing and debugging.
I'm unsure about the proper way to install the database and sql server express on the network. My program, which sends the info to the database, will be installed locally on each persons computer. Of course, the database file will be in a location on the network that everyone has access to.I'm assuming I should install the SQL Server Express on the network server as well. How do I setup the server for the SQL express?For example, when I installed it on my computer, the default server name was "Brian-HPSQLSERVER".How do I specify a new server name when installing the software?
how to create an Installation file in VB.Net. I create via Setup Project in Setup & Deployment . But how i add Shortcuts , Licence agreement, Serial no and Welcome notes.
View 2 RepliesThe 'DefaultLocation' for my application is set to '[ProgramFilesFolder]MyApp'. Now I would like the user to select what drive to install this application to. I know this is accomplished through the 'Installation Folder Selection' dialog, but I want the user to be able to select a drive only, not the entire path.
My question is how do I capture what drive the user selected from the 'Installation Folder Selection' dialog and use that drive letter to tack on to my 'DefaultLocation' variable?
[Code]...
I've just created a setup file for my application . Instead of using the click once process , I used the Create Install Free 4.14.5 program , in order to be able to specify some parameters that under click once I couldn't (like specifying installation folder etc) . The problem , however , is that now when I installed the application , an error message appears saying that the computer is missing the Visual Basic Power Packs 9.0 (which I indeed used in my application) . So , is there any way I can add it to my setup file ? That is in order to avoid making people manually downloading and installing it .
View 4 Replies[ProgramFilesFolder][Manufacturer][ProductName][Version] is the Default. i Want to change the programfilesfolder to documents folder.
I already try this:
[DocumentsFolder][Manufacturer][ProductName] but it doesnt work. error in installing the product. ERRROR: "Could not access network location Polongo companyMC"
Iam changing the installation directory because when the application is installed in program files, my database can't add and edit record. having an error something like "operation must need an updateable query" because of that error i tried to install the appl in documents and there n error i'd encountered like when I install it to the program files folder.
Can I have Two basic Questions about Setup Project deploying -
1, After I put company's logo at startup installation, there was still text shown up "Welcome xxxx setup.." together with the logo, how to remove it and display company's logo only? Also, if using text display and the text is too long, how to return to next line?
2, If I setup more than once, I was told to remove the first one using Add/Remove program in Control Panel before setting up new program. How can I use a dialog like "Overwrite the existing program"?
I want to create personal folders during installation. I did the following steps:
Right click on your setup project ->
View -> File System
Right click on node "File system on
[Code]....
I know the above steps are correct and should work because i did it in the other application (solution) and worked fine. When i did same exact steps (of course i changed the folder name to be created), the application gets deployed but when i install, i don't get the Personal Folder under Documents? I wonder why did it work with my first solution and didn't work with the current one!
I've created a setup project for a VB.NET 2010 application that I've written. The application, and the installer both work fine on my development machine.The installer works fine on other machines, but when I run my application it immediately crashes and dies without telling me anything useful. I've tried it on Windows 7, Windows XP, and Windows Vista machines... and all had the same problem, so I think it's more of a package configuration issue than a machine-specific problem.Here's the most useful information that I was able to get out of it:
[Code]...
I am creating a windows application setup project using Visual studio 2008 setup project. This setup will have following steps[code]...
View 1 RepliesThe default installation of my setup project is as follows:
[ProgramFilesFolder][Manufacturer][ProductName]
The problem is PC in Europe don't have a "Program Files" folder, it's in a different language.When I remove [ProgramFilesFolder] from the setup program, the installation doesn't work. I would like to install the application in C:AppFolder,
In .Net Setup Wizard , While Installing Application Wizard shows ' Folder where to Install' but I want to show only Drive Letter like C, D etc Not to give option of folder
View 1 RepliesI am executing stored procedure using ExcuteReader() command. If I execute Stored Procedure in SQL server it is taking 2 secs. But in code taking around 2 mins. I tried DataAdapter.Fill(). Still the same.
What is wrong in the code?
spString = "usp_graph"
sqlcmd_q.Connection = sqlCnn
sqlcmd_q.CommandText = spString
[Code]....
I have List (of class). having 1800 of count and each object has 90 properties. When I terate earch with 90 properties taking more and more time. How to resolve this
Dim cellIntStyle As HSSFCellStyle = hssfworkbook.CreateCellStyle
cellIntStyle.DataFormat = HSSFDataFormat.GetBuiltinFormat("#")
Dim cellDateStyle As HSSFCellStyle = hssfworkbook.CreateCellStyle
[Code]....
below code is taking 150 to 200 second to read data (actualy my response data is very large) [code]
View 1 RepliesI am using vb.net in which I have put the background image to every form. The image size is 1024X768. When I open the form it is taking too much time to open. and screen is fluctuate.
View 1 RepliesI have a backend database in MS access, which is updated using excel as front end. Due to network issues the record updation takes lot of time. Would it be faster if i use VB.net as the front end.
View 1 RepliesI am on one asignment of convering C# to VB.net and stuck up with this problem.C# application has one class having inline two dimensional array initialized with size 168X168. I converted same class to Vb.net. Now whenever I create instance of my this VB.net class, It take almost 3 minute.
To figure out problem, I put break point on sub new() (first line of my constructor), and behaviour is realy strange because it takes 3 minutes to reach at first point of my constructor.Whenever I comment out my large size array initialization code, It works perfect. Now please note that same code is working fine in C#. It is not taking even few millisecond to initialize that class.
I am writing an application for managing mp3 files. I use AXWindowsMediaPlayer1 for playing files and UltraID3 for reading and writing ID3 tags. Every time the user selects to switch to next song, the ID3 tags of the current file need to be updated. My problem is with Media Player taking a long time to release a file for access after doing a "close". Currently I need to add a 6 seconds delay between the "Close" method of the media player and the ID3 tag "Write", otherwise I get the error saying that the file is currently in use. Anything less than 6 seconds does not work...
I attached a short version of my application which focuses on the issue.
I am upgrading user control from vb6 to vb.net.In the vb6 application I am loading 3000 labels using a label control array.In vb.net I am doing same but it's taking too much time to load.In vb6 it's taking 1-2 seconds, but in vb.net it's taking 30-40 seconds for same work. Why does it take too much time in vb.net for same work?Code is given below, here Led is the label control array.
For l = 1 To 3000
Led.Load(ledCounter)
ColLed.Add(Led(ledCounter))
[code]....
I'm writing a program to search files.The result is saved in a text file.Everything it's working fine, but when I say to look for files/folders in C:* the process takes long time and in task manager it's displayed as "Not Responding", this is not true because I see that CPU and RAM are working with this process.I've disabled in DEBUG OPTIONS the line "ContextSwitchDeadlock" just to prevent the error message "this operation require long time ... bla bla bla".Is there any way to display a progress bar or something like that that shows the program is running and it isn't "hang"?Here's my code (in red the line where the program hangs):
Code:
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim cartella, scelta, cosa As String
[code]....
I think that it's like when you type in the command prompt "tree" it doesn't hang... I know... it's not the same thing but...I'm using Visual Basic 2008 Express?
I just made an application using MySQL for the database. I use WAMP.Can I combine WAMP and my application installation into one packet installation ?
View 2 RepliesI am creating a project which i will be selling to an organization
View 9 RepliesIm doing my first project with WinForms, and Im trying to get the DataBinding working. Theres no database in my project, but I'd like to bind some of the TextBoxes to objects' properties. In the other section of this forum (here) I found this line of C# code which does it: textBox2.DataBindings.Add(new Binding("Text", this.myPerson, "LastName"));
my question is can data binding to object properties be set up during design time (without writing code)? If so, how? P.S. I know how I would set up this binding if in WPF, but I'm forced to use WinForms.