I'm trying to get SharpSVN to work with a VB.NET project I'm working on in VS2010. I've added SharpSVN.dll to my project references but the following error appears when I try to load the site:Could not load file or assembly 'SharpSvn' or one of its dependencies. An attempt was made to load a program with an incorrect format.Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
I have recently downloaded and installed VS2010 evaluation copy. I loaded a VS2002 programme I have been working on and until today it compiled and ran fine. Now I get this error. "Error while trying to run project: Unable to start programme "c:CreateF1ScreensinCreateF1Screens.exe.
This application has failed to start because the application configuration is incorrect. Review etc etc"
I use the following code to write to a Foxpro DBF. The SQL table I am reading from has 9500 rows. When I loop through the following code, I get an error after about 940 rows. There is nothing wrong with the SQL data. The message I get is 'Variable Q940P65 is not found'
Public g_OLEDB_ConnectionString As String = "Provider=vfpoledb;Data Source=N:;Collating Sequence=machine;" dim strSQL as string = "INSERT INTO STATEUSR(DATEFIELD, STATECODE, MINAMOUNT) VALUES(?,?,?)"
I installed VS2010 SP1/TFS2010 SP1. Now VB solutions that built successfully now fail Rebuild with massive lists of errors, eg:
Error 14 'IsNothing' is not declared. It may be inaccessible due to its protection level. C:ProjectsNewDoxDOXLinkDocType.vb 142 12 DOXLink Error 12 'ChrW' is not a member of 'VisualBasic'. C:ProjectsNewDoxDOXLinkDOXDBDataSet.Designer.vb 14947 120 DOXLink Error 44 'Computer' is not a member of 'My'. C:ProjectsNewDoxDOXLinkLanFolder.vb 110 20 DOXLink Error 15 'vbCrLf' is not declared. It may be inaccessible due to its protection
I'am Using Visual studio 2010 from 1 year , and it's work fine But Today when I tryed to open the Vs2010 an Error Msg was Appeared to me which is (Cannot Find One Or More Components please reinstall the application.)
I have some code from this site CodeProjectLink to convert a datatable to a recordset. This code had been working fine until I changed to .NET 4 (was previously 2), now when I call the following line:
Dim result As New ADODB.Recordset() result.CursorLocation = ADODB.CursorLocationEnum.adUseClient Dim resultFields As ADODB.Fields = result.Fields
I have been trying to install VB2010 Express, which directs me to uninstall VS2010 Beta. I have been primarily successful in this, but I keep getting error 1402, as follows:Form "Microsoft Visual Studio 2010 Professional Beta 2 Setup - Update Page":
Uninstalling Components:
[completed - check] Microsoft Office Development Tools for Visual Studio 2010 (x64) [completed - check] Microsoft Visual Studio 2010 Professional Beta 2 [pending - double bar] Microsoft Visual Studio Macro Tools
In VS2010 I'm encountering a PInvokeStackImbalance error when I call an unmanaged C function that takes a string argument. This only happens in VS2010 (works fine in earlier versions of vs). I know the MDA is more strict in VS2010 but I can't seem to figure out what the actual problem is.
My FIRST DAY using VS2010, vb.net winforms. I add a form to my project, add a listbox to the form click the Listbox Tasks button click the Use Databound Items checkbox click the Data Source dropdown get an error: "error using the dropdown: Object reference not set to an instance of an object" I had to close Visual Studio and open it again before I could create a simple databound listbox. Every time a new version of VS is released, I hope it will be more stable, but its not. Just more features.
I have a program in VB.NET that has a webbrowser contorl. I wanted to zoom on a page and i found a tutorial online that involved something like thiswebbrowser1.ActiveXInstance.ExecWB(OLECMD...When i went on and typed it on, there's nothing called ExecWB.Why is that? Is it because i'm using IE9?
I have been testing and experimenting with "one click publishing" for a week now, and still cannot get a successful deployment. The results i get are listed below
(4/5/2012 12:14:11 PM) An error occurred when the request was processed on the remote computer.
The application pool that you are trying to use has the 'managedRuntimeVersion' property set to 'v2.0'. This application requires 'v4.0'.
I am working on a login page for an asp.net application. I'm making my own login and everything is working so far: I get a connection, the query is asking to return Count from the table where the username and password match the username password in the table.
I was wondering if they was anyway to get webparts working in other browsers except IE if not is they any other free alternative that has the same drag and snap and saving capabilities?
i'm doing the project of database by using IBM-DB2 and i need to use the visual studio 2010 to connect with IBM-DB2 and i have saw the comment that posy by someone. I follow all the code there and now i found some have a blue line.
Imports System.Data.OleDb Public Class Form1 Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click 'connection string
I am trying to create a UserControl in VB.net, under VS2010. I have the code for the UserControl and I would like to add it to a form. My problem is that, according to every book and forum I have seen, after I build the UserControl, it should show up in the Toolbox. It doesn't. I even downloaded code from a book, the code executes perfectly, but their TrafficLight control doesn't go in the Toolbox (even though the book says it should - and that the only way to set its properties and to add it to the form is through the Control properties). I have tried to add the control to the form manually, by declaring it
Dim myObj As New SomeClass.SomeControl
and in the Designer.vb, identical with the buttons on the form:
Friend WithEvents myObj As SomeClass.SomeControl
With both, I get an error saying
'myObj' is already declared as 'Friend WithEvents myObj As SomeControl' in this class.
And either way, I get an error when I try to look at the design:
Could not find type 'SomeClass.SomeControl'. make sure that the assembly that contains this type is referenced. If this type is part of your development project, make sure the project has been successfully built using settings for your current platform or AnyCPU.
The control by itself builds and shows up in design view (not in the Toolbox though, even though it Imports System.ComponentModel and Inherits System.Windows.Forms.UserControl and... what else ? I tried to build it in a separate project, to see if I creating a separate dll will make a difference, though I really want it in the same project.
Just in case, I missed anything. As far as the google result, I don't see a capability to develop iPhone app using VS2010 (sorry, maybe I shouldn't ask this question here). right? Or, is there a way to write the code in VS, and then using some sort of converter...
I know that there are millions of posts about this already but I cant seem to find one that mirrors my issue. I am using VS2010 and want to automate excel and I'm trying to work through the example here.
MS Tutorial The problem is when I go to add the reference as mentioned 3.Add a reference to the Microsoft Excel Object Library. To do this, follow these steps: -On the Project menu, click Add Reference. -On the COM tab, locate Microsoft Excel Object Library, and click Select.There is no such reference available.
know if this is the right way to automate excel with VS2010.If it is could someone please let me know why I dont have the COM option for excel. im wanting to write in VB.net but if someone has an example in C# that would be fine. I have tried implementing automation using the Microsoft.Office.Interop.Excel.Application dll but i get the following exception when I try to create the excel application.
This line generates the error. EXL = New Microsoft.Office.Interop.Excel.Application()This is the exception
Retrieving the COM class factory for component with CLSID {00024500-0000-0000-C000-000000000046} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG))
In VS2008 we have menu Report->Data Sources... which opens "Report Data Sources" from here we can see Project data sources & we can add them into our report by pressing "Add to Report".but in VS2010 RC there is no such thing like this (no Data Sources... option inside Report menu)
At work I have a 5 screen setup for programming applications etc. I need that many screens becouse I usually program HMI devices that consist of many screens.Ofcourse with the arival of VS2010 and some real multiscreen support I coudn't be happier. I mean actually programming with 5 screens! That would be some awesome multitasking.Unfortunatly that dream was quickly crushed to dust. After installing the VB 2010 Express edition to test it out I started it up and all 5 screens started to bug / flicker / change resolution... and never stops doing that, so I must reboot to recover from that bug. If I reduce the number of screens back to just two then everything works again. Add a third screen and the whole party starts over again.
Now this might be just a problem of the graphical devices that I use (Kensington USB graphics adapters) whom do not support any form of graphics accelleration... Then again, just one adapter does work fine so that actually shouldn't be the problem. I wonder if anyone else has managed to start up VS2010 with more then 2 screens? For now i'll stick to VS2008 as that doesn't bugs out with more then 2 screens, eventhough it doesn't have multiscreen support.